The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries
Abstract
Potassium‐ion batteries (PIBs) are one of the emerging energy‐storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K+ transport kinetics and the structural instability of the cathode materials during K+ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K 0.77 MnO 2⋅0.23H 2 O) are prepared by “hydrothermal potassiation” as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g−1 at a current density of 100 mA g−1, as well as great rate capability (77 mAh g−1 at 1000 mA g−1) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g−1). With the introduction of adequate K+ ions in the interlayer, the K‐birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K+ intercalation/deintercalation. The practical feasibility of the K‐birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard–soft composite carbon anode. This study highlights effective K+‐intercalation for birnessite to achieve superior K‐storage performance for PIBs, making it a general strategy for developing high‐performance cathodes in rechargeable batteries beyond lithium‐ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Cited by
Zeng, Y., Zhang, X., Qin, R., Liu, X., Fang, P., Zheng, D., Tong, Y., & Lu, X. (2019) · Advanced Materials · doi:10.1002/adma.201903675 · Cited by 1,117
Self-citationPotassium-ion batteries: outlook on present and future technologies
Min, X., Xiao, J., Fang, M., Wang, W. (., Zhao, Y., Liu, Y., Abdelkader, A. M., Xi, K., Kumar, R. V., & Huang, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02917c · Cited by 761
Liu, S., Zhu, H., Zhang, B., Li, G., Zhu, H., Ren, Y., Geng, H., Yang, Y., Liu, Q., & Li, C. C. (2020) · Advanced Materials · doi:10.1002/adma.202001113 · Cited by 561
Green Synthesis of Nanomaterials
Huston, M., DeBella, M., DiBella, M., & Gupta, A. (2021) · Nanomaterials · doi:10.3390/nano11082130 · Cited by 502
Zhao, Y., Zhang, P., Liang, J., Xia, X., Ren, L., Song, L., Liu, W., & Sun, X. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.02.030 · Cited by 414
Challenges and Strategies toward Cathode Materials for Rechargeable Potassium‐Ion Batteries
Liu, S., Kang, L., & Jun, S. C. (2021) · Advanced Materials · doi:10.1002/adma.202004689 · Cited by 345
Dhir, S., Wheeler, S., Capone, I., & Pasta, M. (2020) · Chem · doi:10.1016/j.chempr.2020.08.012 · Cited by 293
Li, L., Liu, W., Dong, H., Gui, Q., Hu, Z., Li, Y., & Liu, J. (2021) · Advanced Materials · doi:10.1002/adma.202004959 · Cited by 275
Zhao, Q., Song, A., Ding, S., Qin, R., Cui, Y., Li, S., & Pan, F. (2020) · Advanced Materials · doi:10.1002/adma.202002450 · Cited by 261
Self-citationA fluoroxalate cathode material for potassium-ion batteries with ultra-long cyclability
Ji, B., Yao, W., Zheng, Y., Kidkhunthod, P., Zhou, X., Tunmee, S., Sattayaporn, S., Cheng, H.-M., He, H., & Tang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-15044-y · Cited by 254
Metadata
- Authors
- Lin, B., Zhu, X., Fang, L., Liu, X., Li, S., Zhai, T., Xue, L., Guo, Q., Xu, J., & Xia, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-05-02
- Volume
- 31
- Issue
- 24
- Pages
- e1900060-e1900060
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2943313847
- Cited by
- 250
- References
- 1
- FWCI
- 13.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.