The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Dopant‐Free Small‐Molecule Hole‐Transporting Material for Inverted Perovskite Solar Cells with Efficiency Exceeding 21%
Abstract
Hole‐transporting materials (HTMs) play a critical role in realizing efficient and stable perovskite solar cells (PVSCs). Considering their capability of enabling PVSCs with good device reproducibility and long‐term stability, high‐performance dopant‐free small‐molecule HTMs (SM‐HTMs) are greatly desired. However, such dopant‐free SM‐HTMs are highly elusive, limiting the current record efficiencies of inverted PVSCs to around 19%. Here, two novel donor–acceptor‐type SM‐HTMs (MPA‐BTI and MPA‐BTTI) are devised, which synergistically integrate several design principles for high‐performance HTMs, and exhibit comparable optoelectronic properties but distinct molecular configuration and film properties. Consequently, the dopant‐free MPA‐BTTI‐based inverted PVSCs achieve a remarkable efficiency of 21.17% with negligible hysteresis and superior thermal stability and long‐term stability under illumination, which breaks the long‐time standing bottleneck in the development of dopant‐free SM‐HTMs for highly efficient inverted PVSCs. Such a breakthrough is attributed to the well‐aligned energy levels, appropriate hole mobility, and most importantly, the excellent film morphology of the MPA‐BTTI. The results underscore the effectiveness of the design tactics, providing a new avenue for developing high‐performance dopant‐free SM‐HTMs in PVSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Self-citationZheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Enhanced photovoltage for inverted planar heterojunction perovskite solar cells
Luo, D., Yang, W., Wang, Z., Sadhanala, A., Hu, Q., Su, R., Shivanna, R., Trindade, G. F., Watts, J. F., Xu, Z., et al. (2018) · Science · doi:10.1126/science.aap9282 · Cited by 1,510
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Polymer solar cells with enhanced fill factors
Guo, X., Zhou, N., Lou, S. J., Smith, J., Tice, D. B., Hennek, J. W., Ortiz, R. P., Navarrete, J. T. L., Li, S., Strzalka, J., et al. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.207 · Cited by 938
Self-citationPresent status and future prospects of perovskite photovoltaics
Snaith, H. J. (2018) · Nature Materials · doi:10.1038/s41563-018-0071-z · Cited by 803
Chueh, C.-C., Li, C.-Z., & Jen, A. K.-Y. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03824j · Cited by 799
Lin, Y., Shen, L., Dai, J., Deng, Y., Wu, Y., Bai, Y., Zheng, X., Wang, J., Fang, Y., Wei, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604545 · Cited by 640
Tress, W. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602358 · Cited by 601
Huang, C., Fu, W., Li, C.-Z., Zhang, Z., Qiu, W., Shi, M., Heremans, P., Jen, A. K.-Y., & Chen, H. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b00039 · Cited by 489
Intrinsic Instability of Inorganic–Organic Hybrid Halide Perovskite Materials
Park, B., & Seok, S. I. (2019) · Advanced Materials · doi:10.1002/adma.201805337 · Cited by 454
Understanding the Doping Effect on NiO: Toward High‐Performance Inverted Perovskite Solar Cells
Chen, W., Wu, Y., Fan, J., Djurišić, A. B., Liu, F., Tam, H. W., Ng, A., Surya, C., Chan, W. K., Wang, D., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703519 · Cited by 435
Self-citationProgress, challenges and perspectives in flexible perovskite solar cells
Di Giacomo, F., Fakharuddin, A., Jose, R., & Brown, T. M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01137c · Cited by 428
Interface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Xu, B., Sheibani, E., Liu, P., Zhang, J., Tian, H., Vlachopoulos, N., Boschloo, G., Kloo, L., Hagfeldt, A., & Sun, L. (2014) · Advanced Materials · doi:10.1002/adma.201402415 · Cited by 414
Chen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411
Self-citationAgarwala, P., & Kabra, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta08449d · Cited by 384
Triazatruxene-Based Hole Transporting Materials for Highly Efficient Perovskite Solar Cells
Rakstys, K., Abate, A., Dar, M. I., Gao, P., Jankauskas, V., Jacopin, G., Kamarauskas, E., Kazim, S., Ahmad, S., Grätzel, M., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11076 · Cited by 360
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
Cao, J., Liu, Y.-M., Jing, X., Yin, J., Li, J., Xu, B., Tan, Y.-Z., & Zheng, N. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b06493 · Cited by 263
Rakstys, K., Paek, S., Gao, P., Gratia, P., Marszalek, T., Grancini, G., Cho, K. T., Genevicius, K., Jankauskas, V., Pisula, W., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01718a · Cited by 232
Chen, H., Fu, W., Huang, C., Zhang, Z., Li, S., Ding, F., Shi, M., Li, C., Jen, A. K. ‐., & Chen, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700012 · Cited by 232
Organic interfacial materials for perovskite-based optoelectronic devices
Pham, H. D., Xianqiang, L., Li, W., Manzhos, S., Kyaw, A. K. K., & Sonar, P. (2019) · Energy & Environmental Science · doi:10.1039/c8ee02744g · Cited by 225
Li, Z., Zhu, Z., Chueh, C.-C., Jo, S. B., Luo, J., Jang, S.-H., & Jen, A. K.-Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b06291 · Cited by 209
Metal Oxides as Efficient Charge Transporters in Perovskite Solar Cells
Haque, M. A., Sheikh, A. D., Guan, X., & Wu, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602803 · Cited by 191
Pham, H. D., Do, T. T., Kim, J., Charbonneau, C., Manzhos, S., Feron, K., Tsoi, W. C., Durrant, J. R., Jain, S. M., & Sonar, P. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703007 · Cited by 186
Ye, S., Rao, H., Yan, W., Li, Y., Sun, W., Peng, H., Liu, Z., Bian, Z., Li, Y., & Huang, C. (2016) · Advanced Materials · doi:10.1002/adma.201603850 · Cited by 180
Progress in Tandem Solar Cells Based on Hybrid Organic–Inorganic Perovskites
Chen, B., Zheng, X., Bai, Y., Padture, N. P., & Huang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602400 · Cited by 171
Hole transporting materials for mesoscopic perovskite solar cells – towards a rational design?
Krishna, A., & Grimsdale, A. C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01258f · Cited by 171
Yang, L., Cai, F., Yan, Y., Li, J., Liu, D., Pearson, A. J., & Wang, T. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702613 · Cited by 168
The Role of Charge Selective Contacts in Perovskite Solar Cell Stability
Roose, B., Wang, Q., & Abate, A. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803140 · Cited by 158
Rodríguez‐Seco, C., Cabau, L., Vidal‐Ferran, A., & Palomares, E. J. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00597 · Cited by 155
Disodium Benzodipyrrole Sulfonate as Neutral Hole-Transporting Materials for Perovskite Solar Cells
Shang, R., Zhou, Z., Nishioka, H., Halim, H., Furukawa, S., Takei, I., Ninomiya, N., & Nakamura, E. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b01783 · Cited by 107
Ok, S. A., Jo, B., Somasundaram, S., Woo, H. J., Lee, D. W., Li, Z., Kim, B., Kim, J. H., Song, Y. J., Ahn, T. K., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06998-1 · Cited by 107
Self-citationWang, Y., Zhu, Z., Chueh, C., Jen, A. K. ‐., & Chi, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700823 · Cited by 85
Self-citationPham, H. D., Hu, H., Feron, K., Manzhos, S., Wang, H., Lam, Y. M., & Sonar, P. M. (2017) · Solar RRL · doi:10.1002/solr.201700105 · Cited by 79
Cited by
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Yin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
Organic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Recent progress in the development of high-efficiency inverted perovskite solar cells
Liu, S., Biju, V. P., Qi, Y., Chen, W., & Liu, Z. (2023) · NPG Asia Materials · doi:10.1038/s41427-023-00474-z · Cited by 342
Self-citationCao, Q., Li, Y., Zhang, H., Yang, J., Han, J., Xu, T., Wang, S., Wang, Z., Gao, B., Zhao, J., et al. (2021) · Science Advances · doi:10.1126/sciadv.abg0633 · Cited by 322
Metadata
- Authors
- Wang, Y., Chen, W., Wang, L., Tu, B., Chen, T., Liu, B., Yang, K., Koh, C. W., Zhang, X., Sun, H., Chen, G., Feng, X., Woo, H. Y., Djurišić, A. B., He, Z., & Guo, X.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-07-11
- Volume
- 31
- Issue
- 35
- Pages
- e1902781-e1902781
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2959772752
- Cited by
- 351
- References
- 44
- FWCI
- 19.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.