The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
17% Efficient Organic Solar Cells Based on Liquid Exfoliated WS2 as a Replacement for PEDOT:PSS
Abstract
The application of liquid‐exfoliated 2D transition metal disulfides (TMDs) as the hole transport layers (HTLs) in nonfullerene‐based organic solar cells is reported. It is shown that solution processing of few‐layer WS 2 or MoS 2 suspensions directly onto transparent indium tin oxide (ITO) electrodes changes their work function without the need for any further treatment. HTLs comprising WS 2 are found to exhibit higher uniformity on ITO than those of MoS 2 and consistently yield solar cells with superior power conversion efficiency (PCE), improved fill factor (FF), enhanced short‐circuit current (JSC), and lower series resistance than devices based on poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) and MoS 2. Cells based on the ternary bulk‐heterojunction PBDB‐T‐2F:Y6:PC 71 BM with WS 2 as the HTL exhibit the highest PCE of 17%, with an FF of 78%, open‐circuit voltage of 0.84 V, and a JSC of 26 mA cm−2. Analysis of the cells' optical and carrier recombination characteristics indicates that the enhanced performance is most likely attributed to a combination of favorable photonic structure and reduced bimolecular recombination losses in WS 2‐based cells. The achieved PCE is the highest reported to date for organic solar cells comprised of 2D charge transport interlayers and highlights the potential of TMDs as inexpensive HTLs for high‐efficiency organic photovoltaics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Yuan, J., Zhang, Y., Zhou, L., Zhang, G., Yip, H.-L., Lau, T.-K., Lu, X., Zhu, C., Peng, H., Johnson, P. A., et al. (2019) · Joule · doi:10.1016/j.joule.2019.01.004 · Cited by 5,883
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., Chen, J., Zhao, W., Han, S., Nam, G.-H., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00558 · Cited by 5,100
Liquid Exfoliation of Layered Materials
Nicolosi, V., Chhowalla, M., Kanatzidis, M. G., Strano, M. S., & Coleman, J. N. (2013) · Science · doi:10.1126/science.1226419 · Cited by 3,796
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Organic solar cells based on non-fullerene acceptors
Hou, J., Inganäs, O., Friend, R. H., & Gao, F. (2018) · Nature Materials · doi:10.1038/nmat5063 · Cited by 2,861
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., & Hou, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02677 · Cited by 2,790
Organic and solution-processed tandem solar cells with 17.3% efficiency
Meng, L., Zhang, Y., Wan, X., Li, C., Zhang, X., Wang, Y., Ke, X., Xiao, Z., Ding, L., Xia, R., et al. (2018) · Science · doi:10.1126/science.aat2612 · Cited by 2,527
Metal dichalcogenide nanosheets: preparation, properties and applications
Huang, X., Zeng, Z., & Zhang, H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35387c · Cited by 2,030
Metal oxides for optoelectronic applications
Yu, X., Marks, T. J., & Facchetti, A. (2016) · Nature Materials · doi:10.1038/nmat4599 · Cited by 1,596
Tunable Photoluminescence of Monolayer MoS2 via Chemical Doping
Mouri, S., Miyauchi, Y., & Matsuda, K. (2013) · Nano Letters · doi:10.1021/nl403036h · Cited by 1,517
Zeng, H., Liu, G.-B., Dai, J., Yan, Y., Zhu, B., He, R., Xie, L., Xu, S., Chen, X., Yao, W., et al. (2013) · Scientific Reports · doi:10.1038/srep01608 · Cited by 1,064
A Mixed‐Solvent Strategy for Efficient Exfoliation of Inorganic Graphene Analogues
Zhou, K., Mao, N., Wang, H., Peng, Y., & Zhang, H. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201105364 · Cited by 929
Efficient inverted polymer solar cells employing favourable molecular orientation
Vohra, V., Kawashima, K., Kakara, T., Koganezawa, T., Osaka, I., Takimiya, K., & Murata, H. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.84 · Cited by 829
Recent Progress and Future Prospects of 2D‐Based Photodetectors
Huo, N., & Konstantatos, G. (2018) · Advanced Materials · doi:10.1002/adma.201801164 · Cited by 730
Ultrathin graphene-based membrane with precise molecular sieving and ultrafast solvent permeation
Yang, Q., Su, Y., Chi, C., Cherian, C. T., Huang, K., Kravets, V. G., Wang, F. C., Zhang, J. C., Pratt, A., Grigorenko, A. N., et al. (2017) · Nature Materials · doi:10.1038/nmat5025 · Cited by 725
Interface-Assisted Synthesis of 2D Materials: Trend and Challenges
Dong, R., Zhang, T., & Feng, X. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00056 · Cited by 710
Charge carrier recombination in organic solar cells
Proctor, C. M., Kuik, M., & Nguyen, T.-Q. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.08.008 · Cited by 704
Sun, Y., Takacs, C. J., Cowan, S. R., Seo, J. H., Gong, X., Roy, A., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201100038 · Cited by 629
Solution‐Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
Manders, J. R., Tsang, S., Hartel, M. J., Lai, T., Chen, S., Amb, C. M., Reynolds, J. R., & So, F. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202269 · Cited by 541
Li, N., Perea, J. D., Kassar, T., Richter, M., Heumueller, T., Matt, G. J., Hou, Y., Güldal, N. S., Chen, H., Chen, S., et al. (2017) · Nature Communications · doi:10.1038/ncomms14541 · Cited by 383
Zeng, Z., Tan, C., Huang, X., Bao, S., & Zhang, H. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42620c · Cited by 355
Highly Efficient Fullerene‐Free Polymer Solar Cells Fabricated with Polythiophene Derivative
Qin, Y., Uddin, M. A., Chen, Y., Jang, B., Zhao, K., Zheng, Z., Yu, R., Shin, T. J., Woo, H. Y., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201601803 · Cited by 335
Liu, Z., Li, J., Sun, Z.-H., Tai, G., Lau, S.-P., & Yan, F. (2012) · ACS Nano · doi:10.1021/nn204675r · Cited by 314
Atomically Thin-Layered Molybdenum Disulfide (MoS2) for Bulk-Heterojunction Solar Cells
Singh, E., Kim, K. S., Yeom, G. Y., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13582 · Cited by 281
Wijeyasinghe, N., Regoutz, A., Eisner, F., Du, T., Tsetseris, L., Lin, Y., Faber, H., Pattanasattayavong, P., Li, J., Yan, F., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701818 · Cited by 261
Self-citationTang, G., You, P., Tai, Q., Yang, A., Cao, J., Zheng, F., Zhou, Z., Zhao, J., Chan, P. K. L., & Yan, F. (2019) · Advanced Materials · doi:10.1002/adma.201807689 · Cited by 252
Gu, X., Cui, W., Li, H., Wu, Z., Zeng, Z., Lee, S., Zhang, H., & Sun, B. (2013) · Advanced Energy Materials · doi:10.1002/aenm201300549 · Cited by 251
Interface design for high-efficiency non-fullerene polymer solar cells
Sun, C., Wu, Z., Hu, Z., Xiao, J., Zhao, W., Li, H., Li, Q., Tsang, S., Xu, Y., Zhang, K., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00601b · Cited by 228
Lin, S., Liu, S., Yang, Z., Li, Y., Ng, T. W., Xu, Z., Bao, Q., Hao, J., Lee, C., Surya, C., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503273 · Cited by 216
Firdaus, Y., Le Corre, V. M., Khan, J. I., Kan, Z., Laquai, F., Beaujuge, P. M., & Anthopoulos, T. D. (2019) · Advanced Science · doi:10.1002/advs.201802028 · Cited by 184
Self-citationPerez, L. A., Chou, K. W., Love, J. A., van der Poll, T. S., Smilgies, D., Nguyen, T., Kramer, E. J., Amassian, A., & Bazan, G. C. (2013) · Advanced Materials · doi:10.1002/adma.201302389 · Cited by 163
Yang, X., Fu, W., Liu, W., Hong, J., Cai, Y., Jin, C., Xu, M., Wang, H., Yang, D., & Chen, H. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01336k · Cited by 151
Kwon, K. C., Kim, C.-M., Le, Q. V., Gim, S., Jeon, J., Ham, J., Lee, J., Jang, H. W., & Kim, S. Y. (2015) · ACS Nano · doi:10.1021/acsnano.5b01504 · Cited by 104
Polymer Main‐Chain Substitution Effects on the Efficiency of Nonfullerene BHJ Solar Cells
Firdaus, Y., Maffei, L. P., Cruciani, F., Müller, M. A., Liu, S., Lopatin, S., Wehbe, N., Ndjawa, G. O. N., Amassian, A., Laquai, F., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700834 · Cited by 97
Self-citationMoS2 Quantum Dots with a Tunable Work Function for High-Performance Organic Solar Cells
Wang, X., Chen, Y., Wang, X., Lv, L., Ouyang, X., Ge, Z., & Huang, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06081 · Cited by 91
Charge transport and its characterization using photo‐ CELIV in bulk heterojunction solar cells
Stephen, M., Genevičius, K., Juška, G., Arlauskas, K., & Hiorns, R. C. (2016) · Polymer International · doi:10.1002/pi.5274 · Cited by 89
Zhang, X., Cheng, H., & Zhang, H. (2017) · Advanced Materials · doi:10.1002/adma.201701704 · Cited by 82
Cited by
Yao, J., Qiu, B., Zhang, Z.-G., Xue, L., Wang, R., Zhang, C., Chen, S., Zhou, Q., Sun, C., Yang, C., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16509-w · Cited by 781
Progress in Stability of Organic Solar Cells
Duan, L., & Uddin, A. (2020) · Advanced Science · doi:10.1002/advs.201903259 · Cited by 534
Wan, X., Li, C., Zhang, M., & Chen, Y. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00084a · Cited by 532
Recent Progress on Two-Dimensional Materials
Chang, C., Chen, W., Chen, Y., Chen, Y., Chen, Y., Ding, F., Fan, C., Jin Fan, H., Fan, Z., Gong, C., et al. (2021) · Acta Physico Chimica Sinica · doi:10.3866/pku.whxb202108017 · Cited by 472
Doping Approaches for Organic Semiconductors
Scaccabarozzi, A. D., Basu, A., Aniés, F., Liu, J., Zapata-Arteaga, O., Warren, R., Firdaus, Y., Nugraha, M. I., Lin, Y., Campoy-Quiles, M., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00581 · Cited by 468
Self-citation
Metadata
- Authors
- Lin, Y., Adilbekova, B., Firdaus, Y., Yengel, E., Faber, H., Sajjad, M., Zheng, X., Yarali, E., Seitkhan, A., Bakr, O. M., El‐Labban, A., Schwingenschlögl, U., Tung, V., McCulloch, I., Laquai, F., & Anthopoulos, T. D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-09-30
- Volume
- 31
- Issue
- 46
- Pages
- e1902965-e1902965
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2978340922
- Cited by
- 586
- References
- 40
- FWCI
- 39.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.