The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes
Abstract
The practical implementation of the lithium metal anode is hindered by obstacles such as Li dendrite growth, large volume changes, and poor lifespan. Here, copper nitride nanowires (Cu 3 N NWs) printed Li by a facile and low‐cost roll‐press method is reported, to operate in carbonate electrolytes for high‐voltage cathode materials. Through one‐step roll pressing, Cu 3 N NWs can be conformally printed onto the Li metal surface, and form a Li 3 N@Cu NWs layer on the Li metal. The Li 3 N@Cu NWs layer can assist homogeneous Li‐ion flux with the 3D channel structure, as well as the high Li‐ion conductivity of the Li 3 N. With those beneficial effects, the Li 3 N@Cu NWs layer can guide Li to deposit into a dense and planar structure without Li‐dendrite growth. Li metal with Li 3 N@Cu NWs protection layer exhibits outstanding cycling performances even at a high current density of 5.0 mA cm−2 with low overpotentials in Li symmetric cells. Furthermore, the stable cyclability and improved rate capability can be realized in a full cell using LiCoO 2 over 300 cycles. When decoupling the irreversible reactions of the cathode using Li 4 T i5 O 12, stable cycling performance over 1000 cycles can be achieved at a practical current density of ≈2 mA cm−2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
A robust all-organic protective layer towards ultrahigh-rate and large-capacity Li metal anodes
Li, S., Huang, J., Cui, Y., Liu, S., Chen, Z., Huang, W., Li, C., Liu, R., Fu, R., & Wu, D. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01107-2 · Cited by 380
Surface engineering toward stable lithium metal anodes
Lu, G., Nai, J., Luan, D., Tao, X., & Lou, X. W. (. (2023) · Science Advances · doi:10.1126/sciadv.adf1550 · Cited by 289
Metadata
- Authors
- Lee, D., Sun, S., Kwon, J., Park, H., Jang, M., Park, E., Son, B., Jung, Y., Song, T., & Paik, U.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-01-12
- Volume
- 32
- Issue
- 7
- Pages
- e1905573-e1905573
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2999466962
- Cited by
- 159
- References
- 1
- FWCI
- 9.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes. https://app.cochat.ai/papers/10.1002/adma.201905573
- The paper
- Lee, D., Sun, S., Kwon, J., Park, H., Jang, M., Park, E., Son, B., Jung, Y., Song, T., & Paik, U. (2020). Copper Nitride Nanowires Printed Li with Stable Cycling for Li Metal Batteries in Carbonate Electrolytes. Advanced Materials. https://doi.org/10.1002/adma.201905573
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.