The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Tape‐Casting Li0.34La0.56TiO3 Ceramic Electrolyte Films Permit High Energy Density of Lithium‐Metal Batteries
Abstract
Ceramic oxide electrolytes are outstanding due to their excellent thermostability, wide electrochemical stable windows, superior Li‐ion conductivity, and high elastic modulus compared to other electrolytes. To achieve high energy density, all‐solid‐state batteries require thin solid‐state electrolytes that are dozens of micrometers thick due to the high density of ceramic electrolytes. Perovskite‐type Li 0.34 La 0.56 TiO 3 (LLTO) freestanding ceramic electrolyte film with a thickness of 25 µm is prepared by tape‐casting. Compared to a thick electrolyte (>200 µm) obtained by cold‐pressing, the total Li ionic conductivity of this LLTO film improves from 9.6 × 10−6 to 2.0 × 10−5 S cm−1. In addition, the LLTO film with a thickness of 25 µm exhibits a flexural strength of 264 MPa. An all‐solid‐state Li‐metal battery assembled with a 41 µm thick LLTO exhibits an initial discharge capacity of 145 mAh g−1 and a high capacity retention ratio of 86.2% after 50 cycles. Reducing the thickness of oxide ceramic electrolytes is crucial to reduce the resistance of electrolytes and improve the energy density of Li‐metal batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Lithium battery chemistries enabled by solid-state electrolytes
Manthiram, A., Yu, X., & Wang, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.103 · Cited by 4,689
Self-citationBachman, J. C., Muy, S., Grimaud, A., Chang, H.-H., Pour, N., Lux, S. F., Paschos, O., Maglia, F., Lupart, S., Lamp, P., et al. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00563 · Cited by 2,537
Zhu, Y., He, X., & Mo, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b07517 · Cited by 1,936
High ionic conductivity in lithium lanthanum titanate
Inaguma, Y., Liquan, C., Itoh, M., Nakamura, T., Uchida, T., Ikuta, H., & Wakihara, M. (1993) · Solid State Communications · doi:10.1016/0038-1098(93)90841-a · Cited by 1,598
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
Zhou, W., Wang, S., Li, Y., Xin, S., Manthiram, A., & Goodenough, J. B. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05341 · Cited by 1,006
Self-citationProtected Lithium‐Metal Anodes in Batteries: From Liquid to Solid
Yang, C., Fu, K., Zhang, Y., Hitz, E., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201701169 · Cited by 757
Luo, W., Gong, Y., Zhu, Y., Li, Y., Yao, Y., Zhang, Y., Fu, K. (., Pastel, G., Lin, C., Mo, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606042 · Cited by 651
Electrical properties of amorphous lithium electrolyte thin films
BATES, J. (1992) · Solid State Ionics · doi:10.1016/0167-2738(92)90442-r · Cited by 600
Cited by
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Confronting the Challenges in Lithium Anodes for Lithium Metal Batteries
Wang, Q., Liu, B., Shen, Y., Wu, J., Zhao, Z., Zhong, C., & Hu, W. (2021) · Advanced Science · doi:10.1002/advs.202101111 · Cited by 531
Wang, C., Liang, J., Zhao, Y., Zheng, M., Li, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00551k · Cited by 489
Reducing the thickness of solid-state electrolyte membranes for high-energy lithium batteries
Wu, J., Yuan, L., Zhang, W., Li, Z., Xie, X., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02241a · Cited by 425
Yang, X., Adair, K. R., Gao, X., & Sun, X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02714f · Cited by 392
Ma, Y., Wan, J., Yang, Y., Ye, Y., Xiao, X., Boyle, D. T., Burke, W., Huang, Z., Chen, H., Cui, Y., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103720 · Cited by 372
Arandiyan, H., S. Mofarah, S., Sorrell, C. C., Doustkhah, E., Sajjadi, B., Hao, D., Wang, Y., Sun, H., Ni, B.-J., Rezaei, M., et al. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00639d · Cited by 337
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 305
Han, Y., Liu, B., Xiao, Z., Zhang, W., Wang, X., Pan, G., Xia, Y., Xia, X., & Tu, J. (2021) · InfoMat · doi:10.1002/inf2.12166 · Cited by 267
Bridging Interparticle Li+ Conduction in a Soft Ceramic Oxide Electrolyte
Chen, W.-P., Duan, H., Shi, J.-L., Qian, Y., Wan, J., Zhang, X.-D., Sheng, H., Guan, B., Wen, R., Yin, Y.-X., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.0c12965 · Cited by 257
Metadata
- Authors
- Jiang, Z., Wang, S., Chen, X., Yang, W., Yao, X., Hu, X., Han, Q., & Wang, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-11-29
- Volume
- 32
- Issue
- 6
- Pages
- e1906221-e1906221
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2989699135
- Cited by
- 266
- References
- 27
- FWCI
- 12.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.