The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Flexible and Self‐Powered Photodetector Arrays Based on All‐Inorganic CsPbBr3 Quantum Dots
Open accessAbstract
Flexible devices are garnering substantial interest owing to their potential for wearable and portable applications. Here, flexible and self‐powered photodetector arrays based on all‐inorganic perovskite quantum dots (QDs) are reported. CsBr/KBr‐mediated CsPbBr 3 QDs possess improved surface morphology and crystallinity with reduced defect densities, in comparison with the pristine ones. Systematic material characterizations reveal enhanced carrier transport, photoluminescence efficiency, and carrier lifetime of the CsBr/KBr‐mediated CsPbBr 3 QDs. Flexible photodetector arrays fabricated with an optimum CsBr/KBr treatment demonstrate a high open‐circuit voltage of 1.3 V, responsivity of 10.1 A W−1, specific detectivity of 9.35 × 10 13 Jones, and on/off ratio up to ≈10 4. Particularly, such performance is achieved under the self‐powered operation mode. Furthermore, outstanding flexibility and electrical stability with negligible degradation after 1600 bending cycles (up to 60°) are demonstrated. More importantly, the flexible detector arrays exhibit uniform photoresponse distribution, which is of much significance for practical imaging systems, and thus promotes the practical deployment of perovskite products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-responsivity graphene/silicon-heterostructure waveguide photodetectors
Wang, X., Cheng, Z., Xu, K., Tsang, H. K., & Xu, J.-B. (2013) · Nature Photonics · doi:10.1038/nphoton.2013.241 · Cited by 873
Multifunctional Skin‐Inspired Flexible Sensor Systems for Wearable Electronics
Xu, K., Lu, Y., & Takei, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800628 · Cited by 602
Cited by
Surface Chemistry Engineering of Perovskite Quantum Dots: Strategies, Applications, and Perspectives
Bai, Y., Hao, M., Ding, S., Chen, P., & Wang, L. (2022) · Advanced Materials · doi:10.1002/adma.202105958 · Cited by 394
Smart Eutectic Gallium–Indium: From Properties to Applications
Zhao, Z., Soni, S., Lee, T., Nijhuis, C. A., & Xiang, D. (2023) · Advanced Materials · doi:10.1002/adma.202203391 · Cited by 300
Zhao, Y., Yin, X., Li, P., Ren, Z., Gu, Z., Zhang, Y., & Song, Y. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01161-y · Cited by 117
In Situ Patterning Perovskite Quantum Dots by Direct Laser Writing Fabrication
Zhan, W., Meng, L., Shao, C., Wu, X.-G., Shi, K., & Zhong, H. (2021) · ACS Photonics · doi:10.1021/acsphotonics.1c00118 · Cited by 111
Flexible and Wearable Optoelectronic Devices Based on Perovskites
Zhao, R., Gu, Z., Li, P., Zhang, Y., & Song, Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202101124 · Cited by 83
Metadata
- Authors
- Shen, K., Xu, H., Li, X., Guo, J., Sathasivam, S., Wang, M., Ren, A., Choy, K. L., Parkin, I. P., Guo, Z., & Wu, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-04-21
- Volume
- 32
- Issue
- 22
- Pages
- e2000004-e2000004
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3016665389
- Cited by
- 231
- References
- 2
- FWCI
- 11.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.