The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
How To Quantify the Efficiency Potential of Neat Perovskite Films: Perovskite Semiconductors with an Implied Efficiency Exceeding 28%
Open accessAbstract
Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1‐sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non‐radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open‐circuit voltage and the internal quasi‐Fermi level splitting (QFLS), the transport resistance‐free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity‐dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non‐radiative fill factor and open‐circuit voltage loss. It is found that potassium‐passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Cited by
Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction
Al-Ashouri, A., Köhnen, E., Li, B., Magomedov, A., Hempel, H., Caprioglio, P., Márquez, J. A., Morales Vilches, A. B., Kasparavicius, E., Smith, J. A., et al. (2020) · Science · doi:10.1126/science.abd4016 · Cited by 2,095
Self-citationStabilized hole-selective layer for high-performance inverted p-i-n perovskite solar cells
Li, Z., Sun, X., Zheng, X., Li, B., Gao, D., Zhang, S., Wu, X., Li, S., Gong, J., Luther, J. M., et al. (2023) · Science · doi:10.1126/science.ade9637 · Cited by 862
Self-citationRegulating surface potential maximizes voltage in all-perovskite tandems
Chen, H., Maxwell, A., Li, C., Teale, S., Chen, B., Zhu, T., Ugur, E., Harrison, G., Grater, L., Wang, J., et al. (2023) · Nature · doi:10.1038/s41586-022-05541-z · Cited by 623
Highly efficient p-i-n perovskite solar cells that endure temperature variations
Li, G., Su, Z., Canil, L., Hughes, D., Aldamasy, M. H., Dagar, J., Trofimov, S., Wang, L., Zuo, W., Jerónimo-Rendon, J. J., et al. (2023) · Science · doi:10.1126/science.add7331 · Cited by 572
Engineering ligand reactivity enables high-temperature operation of stable perovskite solar cells
Park, S. M., Wei, M., Xu, J., Atapattu, H. R., Eickemeyer, F. T., Darabi, K., Grater, L., Yang, Y., Liu, C., Teale, S., et al. (2023) · Science · doi:10.1126/science.adi4107 · Cited by 492
Efficient and stable perovskite-silicon tandem solar cells through contact displacement by MgF x
Liu, J., De Bastiani, M., Aydin, E., Harrison, G. T., Gao, Y., Pradhan, R. R., Eswaran, M. K., Mandal, M., Yan, W., Seitkhan, A., et al. (2022) · Science · doi:10.1126/science.abn8910 · Cited by 460
Tin Oxide Electron‐Selective Layers for Efficient, Stable, and Scalable Perovskite Solar Cells
Altinkaya, C., Aydin, E., Ugur, E., Isikgor, F. H., Subbiah, A. S., De Bastiani, M., Liu, J., Babayigit, A., Allen, T. G., Laquai, F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005504 · Cited by 348
Nano-optical designs for high-efficiency monolithic perovskite–silicon tandem solar cells
Tockhorn, P., Sutter, J., Cruz, A., Wagner, P., Jäger, K., Yoo, D., Lang, F., Grischek, M., Li, B., Li, J., et al. (2022) · Nature Nanotechnology · doi:10.1038/s41565-022-01228-8 · Cited by 345
Self-citationZhang, D., Stojanovic, M., Ren, Y., Cao, Y., Eickemeyer, F. T., Socie, E., Vlachopoulos, N., Moser, J.-E., Zakeeruddin, S. M., Hagfeldt, A., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21945-3 · Cited by 341
Chen, R., Wang, J., Liu, Z., Ren, F., Liu, S., Zhou, J., Wang, H., Meng, X., Zhang, Z., Guan, X., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01288-7 · Cited by 302
Understanding Performance Limiting Interfacial Recombination in pin Perovskite Solar Cells
Warby, J., Zu, F., Zeiske, S., Gutierrez‐Partida, E., Frohloff, L., Kahmann, S., Frohna, K., Mosconi, E., Radicchi, E., Lang, F., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103567 · Cited by 297
Self-citationGharibzadeh, S., Fassl, P., Hossain, I. M., Rohrbeck, P., Frericks, M., Schmidt, M., Duong, T., Khan, M. R., Abzieher, T., Nejand, B. A., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01508g · Cited by 289
Zhu, J., Luo, Y., He, R., Chen, C., Wang, Y., Luo, J., Yi, Z., Thiesbrummel, J., Wang, C., Lang, F., et al. (2023) · Nature Energy · doi:10.1038/s41560-023-01274-z · Cited by 283
Self-citationRecent progress in morphology optimization in perovskite solar cell
Tailor, N. K., Abdi-Jalebi, M., Gupta, V., Hu, H., Dar, M. I., Li, G., & Satapathi, S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta00143k · Cited by 268
Self-citationKim, S., Jang, J. H., Wu, Z., Lee, M. J., Woo, H. Y., & Hwang, I. (2021) · Small · doi:10.1002/smll.202101839 · Cited by 36
Metadata
- Authors
- Stolterfoht, M., Grischek, M., Caprioglio, P., Wolff, C. M., Gutierrez‐Partida, E., Peña‐Camargo, F., Rothhardt, D., Zhang, S., Raoufi, M., Wolansky, J., Abdi‐Jalebi, M., Stranks, S. D., Albrecht, S., Kirchartz, T., & Neher, D.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-03-12
- Volume
- 32
- Issue
- 17
- Pages
- e2000080-e2000080
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3011785384
- Cited by
- 209
- References
- 1
- FWCI
- 10.72
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.