The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Robust Fabrication of Hybrid Lead‐Free Perovskite Pellets for Stable X‐ray Detectors with Low Detection Limit
Abstract
X‐ray detectors are widely utilized in medical diagnostics and nondestructive product inspection. Halide perovskites are recently demonstrated as excellent candidates for direct X‐ray detection. However, it is still challenging to obtain high quality perovskites with millimeter‐thick over a large area for high performance, stable X‐ray detectors. Here, methylammonium bismuth iodide (MA 3 Bi 2 I 9) polycrystalline pellets (PPs) are developed by a robust, cost effective, and scalable cold isostatic‐pressing for fabricating X‐ray detectors with low limit of detection (LoD) and superior operational stability. The MA 3 Bi 2 I 9‐PPs possess a high resistivity of 2.28 × 10 11 Ω cm and low dark carrier concentration of ≈10 7 cm−3, and balanced mobility of ≈2 cm 2 V−1 s−1 for electrons and holes. These merits enable a sensitivity of 563 μC Gy air−1 cm−2, a detection efficiency of 28.8%, and an LoD of 9.3 nGy air s−1 for MA 3 Bi 2 I 9‐PPs detectors, and the LoD is much lower than the dose rate required for X‐ray diagnostics used currently (5.5 μGy air s−1). In addition, the MA 3 Bi 2 I 9‐PPs detectors work stably under high working bias field up to 2000 V cm−1 after sensing an integrated dose >320 Gy air with continuous X‐ray radiation, demonstrating its competitive advantage in practical application. These findings provide an approach to explore a new generation of low LoD, stable and green X‐ray detectors based on MA 3 Bi 2 I 9‐PPs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for commercializing perovskite solar cells
Rong, Y., Hu, Y., Mei, A., Tan, H., Saidaminov, M. I., Seok, S. I., McGehee, M. D., Sargent, E. H., & Han, H. (2018) · Science · doi:10.1126/science.aat8235 · Cited by 2,140
Cited by
Metal Halide Perovskites for X-ray Imaging Scintillators and Detectors
Zhou, Y., Chen, J., Bakr, O. M., & Mohammed, O. F. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.0c02430 · Cited by 891
Metal Halide Perovskites for X-Ray Detection and Imaging
Wu, H., Ge, Y., Niu, G., & Tang, J. (2021) · Matter · doi:10.1016/j.matt.2020.11.015 · Cited by 585
Lead‐Free Double Perovskite Cs2AgBiBr6: Fundamentals, Applications, and Perspectives
Lei, H., Hardy, D., & Gao, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105898 · Cited by 514
Halide perovskites for high-performance X-ray detector
Li, Z., Zhou, F., Yao, H., Ci, Z., Yang, Z., & Jin, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.01.028 · Cited by 370
Perovskite: Scintillators, direct detectors, and X-ray imagers
Jana, A., Cho, S., Patil, S. A., Meena, A., Jo, Y., Sree, V. G., Park, Y., Kim, H., Im, H., & Taylor, R. A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.04.009 · Cited by 363
Metadata
- Authors
- Tie, S., Zhao, W., Xin, D., Zhang, M., Long, J., Chen, Q., Zheng, X., Zhu, J., & Zhang, W.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-06-26
- Volume
- 32
- Issue
- 31
- Pages
- e2001981-e2001981
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3037246479
- Cited by
- 249
- References
- 1
- FWCI
- 23.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.