A High‐Lift Micro‐Aerial‐Robot Powered by Low‐Voltage and Long‐Endurance Dielectric Elastomer Actuators
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Dielectric elastomer actuators (DEAs) are a special class of artificial muscles that have been used to construct animal‐like soft robotic systems. However, compared with state‐of‐the‐art rigid actuators such as piezoelectric bimorphs and electromagnetic motors, most DEAs require higher driving voltages, and their power density and lifetime remain substantially lower. These limitations pose significant challenges for developing agile and powered autonomous soft robots. Here, a low‐voltage, high‐endurance, and power‐dense DEA based on novel multiple‐layering techniques and electrode‐material optimization, is reported. When operated at 400 Hz, the 143 mg DEA generates forces of 0.36 N and displacements of 1.15 mm. This DEA is incorporated into an aerial robot to demonstrate high performance. The robot achieves a high lift‐to‐weight ratio of 3.7, a low hovering voltage of 500 V, and a long lifetime that exceeds 2 million actuation cycles. With 20 s of hovering time, and position and attitude error smaller than 2.5 cm and 2°, respectively, the robot demonstrates the longest and best‐performing flight among existing sub‐gram aerial robots. This important milestone demonstrates that soft robots can outperform their state‐of‐the‐art rigid counterparts, and it provides an important step toward realizing power autonomy in soft robotic flights.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement and modeling of McKibben pneumatic artificial muscles
Chou, C.-P., & Hannaford, B. (1996) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.481753 · Cited by 1,589
Hydraulically amplified self-healing electrostatic actuators with muscle-like performance
Acome, E., Mitchell, S. K., Morrissey, T. G., Emmett, M. B., Benjamin, C., King, M., Radakovitz, M., & Keplinger, C. (2018) · Science · doi:10.1126/science.aao6139 · Cited by 1,072
Compact Dielectric Elastomer Linear Actuators
Zhao, H., Hussain, A. M., Duduta, M., Vogt, D. M., Wood, R. J., & Clarke, D. R. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804328 · Cited by 274
Metadata
- Authors
- Ren, Z., Kim, S., Ji, X., Zhu, W., Niroui, F., Kong, J., & Chen, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-01-04
- Volume
- 34
- Issue
- 7
- Pages
- e2106757-e2106757
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3215514187
- Cited by
- 204
- References
- 3
- FWCI
- 8.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.