The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces
Abstract
Metasurface‐generated holography has emerged as a promising route for fully reproducing vivid scenes by manipulating the optical properties of light using ultra‐compact devices. However, achieving multiple holographic images using a single metasurface is still difficult due to the capacity limit of a single meta‐atom. In this work, an inverse design method based on gradient‐descent optimization is presented to encode multiple pieces of holographic information into a single metasurface. The proposed method allows the inverse design of single‐cell metasurfaces without the need for complex meta‐atom design strategies, facilitating high‐throughput fabrication using broadband low‐loss materials. By exploiting the proposed design method, both multiplane red‐green‐blue (RGB) color and three‐dimensional (3D) holograms are designed and experimentally demonstrated. Multiplane RGB color holograms with nine distinct holograms are achieved, which demonstrate the state‐of‐the‐art data capacity of a phase‐only metasurface. The first experimental demonstration of metasurface‐generated 3D holograms with completely independent and distinct images in each plane is also presented. The current research findings provide a viable route for practical metasurface‐generated holography by demonstrating the high‐density holography produced by a single metasurface. It is expected to ultimately lead to optical storage, display, and full‐color imaging applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Light Propagation with Phase Discontinuities: Generalized Laws of Reflection and Refraction
Yu, N., Genevet, P., Kats, M. A., Aieta, F., Tetienne, J.-P., Capasso, F., & Gaburro, Z. (2011) · Science · doi:10.1126/science.1210713 · Cited by 10,361
Metalenses at visible wavelengths: Diffraction-limited focusing and subwavelength resolution imaging
Khorasaninejad, M., Chen, W. T., Devlin, R. C., Oh, J., Zhu, A. Y., & Capasso, F. (2016) · Science · doi:10.1126/science.aaf6644 · Cited by 3,411
Metasurface Holograms Reaching 80% Efficiency
Zheng, G., Mühlenbernd, H., Kenney, M., Li, G., Zentgraf, T., & Zhang, S. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.2 · Cited by 2,909
Arbabi, A., Horie, Y., Bagheri, M., & Faraon, A. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.186 · Cited by 2,813
A broadband achromatic metalens for focusing and imaging in the visible
Chen, W. T., Zhu, A. Y., Sanjeev, V., Khorasaninejad, M., Shi, Z., Lee, E., & Capasso, F. (2018) · Nature Nanotechnology · doi:10.1038/s41565-017-0034-6 · Cited by 1,866
Inverse design in nanophotonics
Molesky, S., Lin, Z., Piggott, A. Y., Jin, W., Vucković, J., & Rodriguez, A. W. (2018) · Nature Photonics · doi:10.1038/s41566-018-0246-9 · Cited by 1,818
Balthasar Mueller, J. P., Rubin, N. A., Devlin, R. C., Groever, B., & Capasso, F. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.113901 · Cited by 1,771
Metasurface Holograms for Visible Light
Ni, X., Kildishev, A. V., & Shalaev, V. M. (2013) · Nature Communications · doi:10.1038/ncomms3807 · Cited by 1,513
Three-Dimensional Optical Holography Using a Plasmonic Metasurface
Huang, L., Chen, X., Mühlenbernd, H., Zhang, H., Chen, S., Bai, B., Tan, Q., Jin, G., Cheah, K.-W., Qiu, C.-W., et al. (2013) · Nature Communications · doi:10.1038/ncomms3808 · Cited by 1,456
A New Wireless Communication Paradigm through Software-Controlled Metasurfaces
Liaskos, C., Nie, S., Tsioliaridou, A., Pitsillides, A., Ioannidis, S., & Akyildiz, I. (2018) · IEEE Communications Magazine · doi:10.1109/mcom.2018.1700659 · Cited by 1,258
Metadata
- Authors
- So, S., Kim, J., Badloe, T., Lee, C., Yang, Y., Kang, H., & Rho, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-03-18
- Volume
- 35
- Issue
- 17
- Pages
- e2208520-e2208520
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4312212855
- Cited by
- 271
- References
- 52
- FWCI
- 12.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces. https://app.cochat.ai/papers/10.1002/adma.202208520
- The paper
- So, S., Kim, J., Badloe, T., Lee, C., Yang, Y., Kang, H., & Rho, J. (2023). Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces. Advanced Materials. https://doi.org/10.1002/adma.202208520
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.