The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Compact Hole‐Selective Self‐Assembled Monolayers Enabled by Disassembling Micelles in Solution for Efficient Perovskite Solar Cells
Abstract
Self‐assembled monolayers (SAMs) are widely employed as effective hole‐selective layers (HSLs) in inverted perovskite solar cells (PSCs). However, most SAM molecules are amphiphilic in nature and tend to form micelles in the commonly used alcoholic processing solvents. This introduces an extra energetic barrier to disassemble the micelles during the binding of SAM molecules on the substrate surface, limiting the formation of a compact SAM. To alleviate this problem for achieving optimal SAM growth, a co‐solvent strategy to disassemble the micelles of carbazole‐based SAM molecules in the processing solution is developed. This effectively increases the critical micelle concentration to be above the processing concentration and enhances the reactivity of the phosphonic acid anchoring group to allow densely packed SAMs to be formed on indium tin oxide. Consequently, the PSCs derived from using MeO‐2PACz, 2PACz, and CbzNaph SAM HSLs show universally improved performance, with the CbzNaph SAM‐derived device achieving a champion efficiency of 24.98% and improved stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Formation and Structure of Self-Assembled Monolayers
Ulman, A. (1996) · Chemical Reviews · doi:10.1021/cr9502357 · Cited by 7,906
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
Controlled growth of perovskite layers with volatile alkylammonium chlorides
Park, J., Kim, J., Yun, H.-S., Paik, M. J., Noh, E., Mun, H. J., Kim, M. G., Shin, T. J., & Seok, S. I. (2023) · Nature · doi:10.1038/s41586-023-05825-y · Cited by 1,990
Al-Ashouri, A., Magomedov, A., Roß, M., Jošt, M., Talaikis, M., Chistiakova, G., Bertram, T., Márquez, J. A., Köhnen, E., Kasparavičius, E., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02268f · Cited by 1,214
Minimizing buried interfacial defects for efficient inverted perovskite solar cells
Zhang, S., Ye, F., Wang, X., Chen, R., Zhang, H., Zhan, L., Jiang, X., Li, Y., Ji, X., Liu, S., et al. (2023) · Science · doi:10.1126/science.adg3755 · Cited by 1,159
Surface reaction for efficient and stable inverted perovskite solar cells
Jiang, Q., Tong, J., Xian, Y., Kerner, R. A., Dunfield, S. P., Xiao, C., Scheidt, R. A., Kuciauskas, D., Wang, X., Hautzinger, M. P., et al. (2022) · Nature · doi:10.1038/s41586-022-05268-x · Cited by 1,154
From Lead Halide Perovskites to Lead‐Free Metal Halide Perovskites and Perovskite Derivatives
Xiao, Z., Song, Z., & Yan, Y. (2019) · Advanced Materials · doi:10.1002/adma.201803792 · Cited by 1,090
Nonradiative Recombination in Perovskite Solar Cells: The Role of Interfaces
Wolff, C. M., Caprioglio, P., Stolterfoht, M., & Neher, D. (2019) · Advanced Materials · doi:10.1002/adma.201902762 · Cited by 738
Improving interface quality for 1-cm2 all-perovskite tandem solar cells
He, R., Wang, W., Yi, Z., Lang, F., Chen, C., Luo, J., Zhu, J., Thiesbrummel, J., Shah, S., Wei, K., et al. (2023) · Nature · doi:10.1038/s41586-023-05992-y · Cited by 705
Li, F., Deng, X., Qi, F., Li, Z., Liu, D., Shen, D., Qin, M., Wu, S., Lin, F., Jang, S.-H., et al. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09845 · Cited by 655
Self-citationInterfacial toughening with self-assembled monolayers enhances perovskite solar cell reliability
Dai, Z., Yadavalli, S. K., Chen, M., Abbaspourtamijani, A., Qi, Y., & Padture, N. P. (2021) · Science · doi:10.1126/science.abf5602 · Cited by 625
Molecular engineering of contact interfaces for high-performance perovskite solar cells
Isikgor, F. H., Zhumagali, S., T. Merino, L. V., De Bastiani, M., McCulloch, I., & De Wolf, S. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00503-3 · Cited by 600
Li, L., Wang, Y., Wang, X., Lin, R., Luo, X., Liu, Z., Zhou, K., Xiong, S., Bao, Q., Chen, G., et al. (2022) · Nature Energy · doi:10.1038/s41560-022-01045-2 · Cited by 534
Charge transfer rates and electron trapping at buried interfaces of perovskite solar cells
Levine, I., Al-Ashouri, A., Musiienko, A., Hempel, H., Magomedov, A., Drevilkauskaite, A., Getautis, V., Menzel, D., Hinrichs, K., Unold, T., et al. (2021) · Joule · doi:10.1016/j.joule.2021.07.016 · Cited by 461
Perovskite–organic tandem solar cells with indium oxide interconnect
Brinkmann, K. O., Becker, T., Zimmermann, F., Kreusel, C., Gahlmann, T., Theisen, M., Haeger, T., Olthof, S., Tückmantel, C., Günster, M., et al. (2022) · Nature · doi:10.1038/s41586-022-04455-0 · Cited by 420
Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability
Li, F., Deng, X., Shi, Z., Wu, S., Zeng, Z., Wang, D., Li, Y., Qi, F., Zhang, Z., Yang, Z., et al. (2023) · Nature Photonics · doi:10.1038/s41566-023-01180-6 · Cited by 368
Self-citationOrganic Hole‐Transport Layers for Efficient, Stable, and Scalable Inverted Perovskite Solar Cells
Yao, Y., Cheng, C., Zhang, C., Hu, H., Wang, K., & De Wolf, S. (2022) · Advanced Materials · doi:10.1002/adma.202203794 · Cited by 363
Jiang, W., Li, F., Li, M., Qi, F., Lin, F. R., & Jen, A. K. ‐. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202213560 · Cited by 331
Self-citationEnhanced optical path and electron diffusion length enable high-efficiency perovskite tandems
Chen, B., Baek, S.-W., Hou, Y., Aydin, E., De Bastiani, M., Scheffel, B., Proppe, A., Huang, Z., Wei, M., Wang, Y.-K., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15077-3 · Cited by 287
Zhou, Y., Herz, L. M., Jen, A. K.-Y., & Saliba, M. (2022) · Nature Energy · doi:10.1038/s41560-022-01096-5 · Cited by 281
Self-citationAmphiphiles in aqueous solution: well beyond a soap bubble
Sorrenti, A., Illa, O., & Ortuño, R. M. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60151j · Cited by 278
Topel, Ö., Çakır, B. A., Budama, L., & Hoda, N. (2013) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2012.10.013 · Cited by 271
Truong, M. A., Funasaki, T., Ueberricke, L., Nojo, W., Murdey, R., Yamada, T., Hu, S., Akatsuka, A., Sekiguchi, N., Hira, S., et al. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c00805 · Cited by 235
Ullah, A., Park, K. H., Nguyen, H. D., Siddique, Y., Shah, S. F. A., Tran, H., Park, S., Lee, S. I., Lee, K., Han, C., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103175 · Cited by 207
Bi, L., Fu, Q., Zeng, Z., Wang, Y., Lin, F. R., Cheng, Y., Yip, H., Tsang, S., & Jen, A. K. ‐. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.2c13566 · Cited by 198
Self-citationMultifunctional Hybrid Interfacial Layers for High‐Performance Inverted Perovskite Solar Cells
Niu, B., Liu, H., Huang, Y., Gu, E., Yan, M., Shen, Z., Yan, K., Yan, B., Yao, J., Fang, Y., et al. (2023) · Advanced Materials · doi:10.1002/adma.202212258 · Cited by 116
Zhao, Z., Chan, C. Y. K., Chen, S., Deng, C., Lam, J. W. Y., Jim, C. K. W., Hong, Y., Lü, P., Chang, Z., Chen, X., et al. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14914a · Cited by 110
Interface Engineering in Solution-Processed Thin-Film Solar Cells
Li, F., & Jen, A. K. ‐. (2022) · Accounts of Materials Research · doi:10.1021/accountsmr.1c00169 · Cited by 62
Self-citationSpontaneous Self‐Assembly and Micellization of Random Copolymers in Organic Solvents
Sadeghi, I., & Asatekin, A. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700226 · Cited by 36
Cited by
Li, M., Liu, M., Qi, F., Lin, F. R., & Jen, A. K.-Y. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00396 · Cited by 642
Self-citationLow-loss contacts on textured substrates for inverted perovskite solar cells
Park, S. M., Wei, M., Lempesis, N., Yu, W., Hossain, T., Agosta, L., Carnevali, V., Atapattu, H. R., Serles, P., Eickemeyer, F. T., et al. (2023) · Nature · doi:10.1038/s41586-023-06745-7 · Cited by 572
Self-assembled bilayer for perovskite solar cells with improved tolerance against thermal stresses
Dong, B., Wei, M., Li, Y., Yang, Y., Ma, W., Zhang, Y., Ran, Y., Cui, M., Su, Z., Fan, Q., et al. (2025) · Nature Energy · doi:10.1038/s41560-024-01689-2 · Cited by 261
Metadata
- Authors
- Liu, M., Bi, L., Jiang, W., Zeng, Z., Tsang, S., Lin, F. R., & Jen, A. K. ‐.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2023-10-12
- Volume
- 35
- Issue
- 46
- Pages
- e2304415-e2304415
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4385189542
- Cited by
- 378
- References
- 30
- FWCI
- 27.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.