Recent Progress in Fabricating Superaerophobic and Superaerophilic Surfaces
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
In spite of large amount of research in fabricating surfaces of varying wettability by biomimicking the naturally occurring surfaces, the work on fundamentally and industrially important air bubble adhesion on solid surfaces and its applications are still in the burgeoning stage. The present progress report provides a discussion and a critical evaluation of the recent literature available on the fabrication of superaerophilic/superaerophobic surfaces via synergic modification of surface topography and surface chemistry. An abridge on the physics behind bubble wetting on a solid in a liquid medium is deciphered here, considering the interfacial surface tension balance at the three‐phase contact line, Laplace pressure, hydrostatic pressure, and surface forces, respectively. Emphasis is made on the advancement in micro/nanofabrication technologies to fabricate surfaces that break the conventional wisdom of complementary behavior of water and air bubble contact angles. The progress report presented here also shines light on the mechanism of air bubble dynamics on solid surfaces and the latest developments in achieving surfaces of varied air bubble adhesion and its applications. Finally, the prospects of the superaerophobic and superaerophilic surfaces in the near future together with the challenges faced in accomplishing them are also insinuated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Lu, Z., Zhu, W., Yu, X., Zhang, H., Li, Y., Sun, X., Wang, X., Wang, H., Wang, J., Luo, J., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304759 · Cited by 1,025
High-Performance Water Electrolysis System with Double Nanostructured Superaerophobic Electrodes
Xu, W., Lu, Z., Wan, P., Kuang, Y., & Sun, X. (2016) · Small · doi:10.1002/smll.201600189 · Cited by 156
Cited by
Self-supported electrocatalysts for practical water electrolysis
Yang, H., Driess, M., & Menezes, P. W. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202102074 · Cited by 489
Bubble evolution and transport in PEM water electrolysis: Mechanism, impact, and management
Yuan, S., Zhao, C., Cai, X., An, L., Shen, S., Yan, X., & Zhang, J. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101075 · Cited by 393
Darband, G. B., Aliofkhazraei, M., & Shanmugam, S. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109300 · Cited by 383
Recent advances in electrocatalysts for neutral and large-current-density water electrolysis
Xu, Y., Wang, C., Huang, Y., & Fu, J. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105545 · Cited by 377
Yang, W., & Chen, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124726 · Cited by 268
Metadata
- Authors
- George, J. E., Chidangil, S., & George, S. D.
- Venue
- Advanced Materials Interfaces
- Publisher
- Wiley
- Published
- 2017-02-20
- Volume
- 4
- Issue
- 9
- ISSN
- 2196-7350 (ISSN-L)
- OpenAlex
- W2589306368
- Cited by
- 123
- References
- 3
- FWCI
- 3.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Recent Progress in Fabricating Superaerophobic and Superaerophilic Surfaces. https://app.cochat.ai/papers/10.1002/admi.201601088
- The paper
- George, J. E., Chidangil, S., & George, S. D. (2017). Recent Progress in Fabricating Superaerophobic and Superaerophilic Surfaces. Advanced Materials Interfaces. https://doi.org/10.1002/admi.201601088
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.