The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Highly Efficient and Stable Self‐Powered Ultraviolet and Deep‐Blue Photodetector Based on Cs2AgBiBr6/SnO2 Heterojunction
Abstract
Ultraviolet (UV) photodetectors with high responsivity and fast response are crucial for practical applications. Double perovskite Cs 2 AgBiBr 6 has emerged as a promising optoelectronic material due to its excellent physics and photoelectric properties. However, no work is reported based on its film for photodetector applications. Herein, an ITO/SnO 2/Cs 2 AgBiBr 6/Au hole‐transport layer free planar heterojunction device is fabricated for photodetector application. The device is self‐powered with two responsivity peaks at 350 and 435 nm, which is suitable for ultraviolet‐A (320–400 nm) and deep‐blue light detecting. A high responsivity of 0.11 A W−1 at 350 nm and a quick response time of less than 3 ms are obtained, which is significantly higher than other semiconductor oxide heterojunction‐based UV detectors. More importantly, the stability is significantly better than most of the hybrid perovskite photodetectors reported so far. Its photocurrent shows no obvious degradation after more than 6 months storage in ambient conditions without any encapsulation. Consequently, the utilization of Cs 2 AgBiBr 6 film is a practical approach for high performance, large‐area lead‐free perovskite photodetector applications. For the mechanism, it is found that photogenerated carriers in Cs 2 AgBiBr 6 film are separated at the Cs 2 AgBiBr 6/SnO 2 heterojunction interface by its built‐in field. The low toxicity and high stability of this double perovskite active layer make it very promising for practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Cited by
Lead‐Free Double Perovskite Cs2AgBiBr6: Fundamentals, Applications, and Perspectives
Lei, H., Hardy, D., & Gao, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105898 · Cited by 514
Chu, L., Ahmad, W., Liu, W., Yang, J., Zhang, R., Sun, Y., Yang, J., & Li, X. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0244-6 · Cited by 446
Lead‐Free Halide Perovskite Materials and Optoelectronic Devices: Progress and Prospective
López‐Fernández, I., Valli, D., Wang, C., Samanta, S., Okamoto, T., Huang, Y., Sun, K., Liu, Y., Chirvony, V. S., Patra, A., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202307896 · Cited by 327
Self-citationLead‐Free Perovskite Photodetectors: Progress, Challenges, and Opportunities
Zhang, Y., Ma, Y., Wang, Y., Zhang, X., Zuo, C., Shen, L., & Ding, L. (2021) · Advanced Materials · doi:10.1002/adma.202006691 · Cited by 326
Lead‐Free Double Perovskites for Perovskite Solar Cells
Kung, P.-K., Li, M.-H., Lin, P.-Y., Jhang, J.-Y., Pantaler, M., Lupascu, D. C., Grancini, G., & Chen, P. (2020) · Solar RRL · doi:10.1002/solr.201900306 · Cited by 290
Metadata
- Authors
- Wu, C., Du, B., Luo, W., Liu, Y., Li, T., Wang, D., Guo, X., Ting, H., Fang, Z., Wang, S., Chen, Z., Chen, Y., & Xiao, L.
- Venue
- Advanced Optical Materials
- Publisher
- Wiley
- Published
- 2018-09-03
- Volume
- 6
- Issue
- 22
- ISSN
- 2195-1071 (ISSN-L)
- OpenAlex
- W2891099471
- Cited by
- 203
- References
- 1
- FWCI
- 6.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.