Functional Persistent Luminescent Thin Films and Glasses: Materials, Processing, and Future Challenges
Open accessThe DOI matches its Crossref record; 297 of the 297 references it cites were found in a registry or an index.
Abstract
Persistent luminescence (PersL) attracts growing attention due to its potential for energy‐efficient optical storage, sensing, and imaging technologies. Although extensively investigated in bulk and powder forms, its translation into transparent and functional thin films or glassy systems remains a major challenge. This review discusses the state of the art in the development of persistent luminescent thin films and glasses, emphasizing processing strategies, structure‐property correlations, and emerging device‐level applications. The mechanisms governing PersL are briefly described. This is followed by an analysis of thin‐film growth techniques, including chemical, physical, and hybrid routes, and highlighting their influence on defect engineering, dopant distribution, and luminescence performance. The discussion integrates advances on polymeric and glass matrices, where control over morphology and interfaces is essential to achieve optical transparency and environmental stability. This review also aims to present opportunities for studying and developing new materials through thin‐film fabrication techniques that contribute to the creation of devices beneficial to society, the environment, and energy. Current limitations and future directions are discussed focusing on trap modulation, compositional design, and scalable fabrication toward next‐generation photonic and optoelectronic devices.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Items 201–297 of 297
Effective Long Afterglow Amplification Induced by Surface Coordination Interaction
Wang, Y., Li, Q., Qu, L., Huang, J., Zhu, Y., Li, C., Chen, Q., Zheng, Y. Q., & Yang, C. (2023) · Advanced Science · doi:10.1002/advs.202306942 · Cited by 15
High-Stability Near-Infrared Luminescent Glass Ceramic and Its Applications
Luo, S., Xiao, J., Ba, H., et al. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09732 · Cited by 15
Szczodra, A., Kuusela, L., Norrbo, I., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.02.075 · Cited by 14
Wu, Y.-Q., Lin, H., Li, R., Lin, S., Wu, C., Huang, Q., Xu, J., Cheng, Y., & Wang, Y. (2021) · Nanoscale · doi:10.1039/d1nr05360d · Cited by 14
de Souza, J. M. M., Lima, K. D. O., Ferrari, J. L., et al. (2022) · Dalton Transactions · doi:10.1039/d1dt04097a · Cited by 14
Self-citationFritzen, D. L., de Mattos, E. A., Petri, D. F. S., et al. (2022) · Dalton Transactions · doi:10.1039/d2dt00770c · Cited by 14
Self-citationPersistent luminescence of Eu/Dy-doped Sr2MgSi2O7 glass-ceramics processed by aerodynamic levitation
Fernández-Rodríguez, L., Allix, M. M. B., Gorni, G., et al. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.08.062 · Cited by 14
Wu, Y., Wu, M., Yu, J., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.07.113 · Cited by 14
Xie, F., Chen, D., Zhang, Y., Lv, X., Chen, X., Sun, K., & Liang, Y. (2023) · Journal of Materials Chemistry C · doi:10.1039/d3tc03409g · Cited by 14
Huang, R., Ni, N., Su, Y., Gu, L., Ju, Y., Zhang, D., Li, J., Chang, M., Chen, Y., Gu, P., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147436 · Cited by 14
Liu, J., Zhang, Z., Fu, M., Zhao, X., Xie, R., Cao, Q., Bai, L., Kang, S., Chen, Y., Yan, S., et al. (2023) · Results in Physics · doi:10.1016/j.rinp.2023.106803 · Cited by 13
Shahzadi, N., Yousaf, M. I., & Ashraf, M. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.08.394 · Cited by 13
Hasnat, M., Lahti, V., Byron, H., et al. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.113864 · Cited by 12
Ni, Z., Fan, T., Bai, S., et al. (2021) · Scanning · doi:10.1155/2021/6337768 · Cited by 12
Role of Eu2+ and Dy3+ Concentration in the Persistent Luminescence of Sr2MgSi2O7 Glass-Ceramics
Fernández-Rodríguez, L., Balda, R. B., Fernandez, J. R., et al. (2022) · Materials · doi:10.3390/ma15093068 · Cited by 12
Magalhães, E. S., Sedda, A., Bondzior, B., Vuori, S., der Heggen, D. V., Smet, P. F., Lastusaari, M., & Petit, L. C. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.01.155 · Cited by 12
Advances in YIG thin films: Deposition strategies and substrate effects
Askarzadeh, N., & Shokrollahi, H. (2025) · Results in Chemistry · doi:10.1016/j.rechem.2025.102390 · Cited by 12
Long‐Lasting Phosphorescence of Transparent Surface‐Crystallized Glass‐Ceramics
Fu, J. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01598.x · Cited by 12
Dlamini, S. T. S., Swart, H. C., & Ntwaeaborwa, O. M. (2013) · Physica B Condensed Matter · doi:10.1016/j.physb.2013.11.050 · Cited by 11
Poulose, A. M., Shaikh, H., Anis, A., Alhamidi, A., Kumar, N. S., Elnour, A. Y., & Al-Zahrani, S. M. (2022) · Materials · doi:10.3390/ma15031142 · Cited by 11
Zhao, Y., Wang, X. L., Li, Q., et al. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.06.013 · Cited by 11
Sol–Gel Synthesis of Translucent and Persistent Luminescent SiO2@ SrAl2O4 Eu, Dy, B Materials
Leimane, M., Križmane, K., Bite, I., et al. (2023) · Materials · doi:10.3390/ma16124416 · Cited by 11
Zhou, Z., Shi, B., Zhang, C., Wang, Y., Tang, P., Feng, J., Fan, J., Jiang, F. D., & Ding, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.159007 · Cited by 11
Optical characterization of window materials for aerospace applications
Tedjojuwono, K. K., Clark, N., & Humphreys, W. M. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2029469 · Cited by 11
Afterglow luminance property of phosphorescent phosphor SrAl2O4:Eu2+,Dy3+-glass composites
Yoshida, H., Fujino, S., & Kajiwara, T. (2010) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.118.784 · Cited by 10
Castaing, V., Romero, M., Torres, J. L. T., et al. (2023) · Advanced Optical Materials · doi:10.1002/adom.202301565 · Cited by 10
Rodríguez-Rosales, K., Cruz-Gómez, J., Santos‐Cruz, J., et al. (2024) · Materials Science and Engineering B · doi:10.1016/j.mseb.2024.117867 · Cited by 10
Enhanced oxygen sensing in ZrO2 thin films via atomic layer deposition by post-deposition annealing
Bohórquez, C., Arce, J. L. V., Cuentas-Gallegos, A. K., et al. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.12.380 · Cited by 10
PMMA with Long-Persistent Phosphors and Its Behavior of Luminescence
Yina, H., Xinye, J., Cai, Q., et al. (2006) · Journal of Rare Earths · doi:10.1016/s1002-0721(07)60348-2 · Cited by 10
Persistent luminescence in the self-activated K 2 Zr(BO 3 ) 2
Ju, G., Hu, Y., Chen, L., et al. (2017) · RSC Advances · doi:10.1039/c6ra26120e · Cited by 9
Fabrication, characterization and electroluminescence studies of SrS: Ce 3+ ACTFEL device
Mishra, S., Kshatri, D. S., Khare, A., et al. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.04.013 · Cited by 9
Glasses and Glass-Ceramics Prepared by Sol–Gel
Cruz, M. E., Castro, Y., & Durán, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818542-1.00020-5 · Cited by 9
Bosco, G., van den Biesen, J. K., Boers, C. D., et al. (2021) · Journal of Luminescence · doi:10.1016/j.jlumin.2021.118421 · Cited by 9
The Progress on Magnetic Material Thin Films Prepared Using Polymer-Assisted Deposition
Ren, H., Zhong, J., & Xiang, G. (2023) · Molecules · doi:10.3390/molecules28135004 · Cited by 9
Hua, Y., & Yu, J. S. (2024) · Materials Today Chemistry · doi:10.1016/j.mtchem.2024.101900 · Cited by 9
Soares, J. H. D. S., Boaventura, T. W., de Moura, A. C. A., et al. (2025) · ACS Agricultural Science & Technology · doi:10.1021/acsagscitech.4c00243 · Cited by 9
Self-citationDing, Y., Wu, Q., Wang, Z., et al. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.102632 · Cited by 9
Verduzco, A. C., Aguilar, J. U. B., & Alonso, J. C. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.179834 · Cited by 9
Persistently Luminescent Inorganic Materials for Anticounterfeiting
Giordano, L., Cai, G., Castaing, V., Viana, B., & Richard, C. (2025) · Wiley eBooks · doi:10.1002/9783527844760.ch6 · Cited by 9
Self-citationPereira, T. P., Canisares, F. S. M., de Araujo-Neto, J. H., et al. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc02512e · Cited by 9
Self-citationScarafagio, M., Tallaire, A., Chavanne, M., et al. (2020) · physica status solidi (a) · doi:10.1002/pssa.201900909 · Cited by 8
A Comprehensive Review on Rare-Earth Based Thermoluminescence Phosphors for Radiation Dosimetry
Pathan, S., Dubey, P., Tadge, P., et al. (2022) · ECS Transactions · doi:10.1149/10701.20073ecst · Cited by 8
Shen, X., Akbarzadeh, A., Hu, Q., et al. (2022) · Journal of Luminescence · doi:10.1016/j.jlumin.2022.119179 · Cited by 8
Excitation‐dependent afterglow evolution based on constructing dual crystal field glass ceramics
Li, P., Song, E., Wang, W., et al. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.19822 · Cited by 8
Pan, X., Song, T., Yang, X., et al. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.19850 · Cited by 8
Heiba, Z. K., Mohamed, M. B., Mouhammad, S. A., et al. (2024) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2024.112031 · Cited by 8
Fabrication of Perovskite Solar Cells: A Focused Review on Manual Deposition Methods
Zarabinia, N., & Brown, T. M. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400831 · Cited by 8
Montazerian, M., & Zanotto, E. D. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-803581-8.11728-x · Cited by 7
Microstructured growth by liquid phase epitaxy of scintillating Gd3Ga5O12 (GGG) doped with Eu3+
Wollesen, L., Douissard, P.-A., Pauwels, K., et al. (2024) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2024.177267 · Cited by 7
Prasad, K. A. K. D., Rakshita, M., Sharma, A. A., Pradhan, P. P., Kumar, K. U., Kumar, R. R., & Haranath, D. (2025) · Journal of Applied Physics · doi:10.1063/5.0230526 · Cited by 7
Phase controlled epitaxy of wurtzite ZnS thin films by metal organic chemical vapor deposition
Melhem, H., Hallais, G., Amiri, G., et al. (2025) · Thin Solid Films · doi:10.1016/j.tsf.2025.140609 · Cited by 7
X-ray imaging and storage based on a NaF modified Y 3 Al 2 Ga 3 O 12 :Ce phosphor
Li, L., Chen, G., You, F., Zhao, J., Shen, D., Lin, S., Lei, L., Xu, S., & Zhou, S. (2025) · Inorganic Chemistry Frontiers · doi:10.1039/d4qi03312d · Cited by 7
Optical Properties of Thin Films of Tin Iodide Perovskite Nanostructures
Manoli, A., Papagiorgis, P. G., Gahlot, K., et al. (2025) · Advanced Optical Materials · doi:10.1002/adom.202500792 · Cited by 7
Analysis of trap distribution of a red persistent luminescent materials using thermoluminescence
Singh, L. L., Singh, S. N., Singh, T. R., et al. (2020) · Luminescence · doi:10.1002/bio.3819 · Cited by 6
Hua, Y., Jing, Z., & Ge, P. (2024) · Applied Sciences · doi:10.3390/app14072947 · Cited by 6
Highly crystalline persistent luminescent glass-ceramic for optical anti-counterfeiting
Yang, H., Gao, Y. N., Lv, W., et al. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.11.479 · Cited by 6
Guo, C., Deng, M., Shi, D., et al. (2024) · Journal of Luminescence · doi:10.1016/j.jlumin.2024.121042 · Cited by 6
Innovative preparation of SrAl2O4:Eu2+, Dy3+ coatings for durable luminescent road markings
He, Y., Wu, Y., Li, R., et al. (2025) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2025.e04532 · Cited by 6
Guo, J., Shang, Y., Zhang, H., et al. (2025) · Nano Letters · doi:10.1021/acs.nanolett.4c06469 · Cited by 6
Shi, C., Xue, H., Zhu, Y., et al. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-8982-7 · Cited by 6
Brook, R. J. (1991) · Elsevier eBooks · doi:10.1016/b978-0-08-034720-2.50121-0 · Cited by 5
Shi, C., Zhu, Y., Li, X., et al. (2018) · ECS Journal of Solid State Science and Technology · doi:10.1149/2.0231806jss · Cited by 5
Jia, P., Zhang, Y., Wang, Z., et al. (2019) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2019.1691456 · Cited by 5
Liquid phase epitaxy growth and structural characterization of highly-doped Er3+:LiYF4 thin films
Basyrova, L., Brasse, G., Loiko, P. A., et al. (2022) · Optical Materials · doi:10.1016/j.optmat.2022.112574 · Cited by 5
Gentili, D., Bolognesi, M., Baldoni, M., et al. (2023) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.3c01379 · Cited by 5
Derksen, M., Bosco, G., Muller, T., et al. (2024) · Journal of Luminescence · doi:10.1016/j.jlumin.2024.120503 · Cited by 5
Liu, Y., Sun, J., McLeod, J. A., et al. (2025) · Materials Today Chemistry · doi:10.1016/j.mtchem.2025.102653 · Cited by 5
Al‐Qahtani, S. D., Al‐Senani, G. M., & Aldoghaim, M. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.07.279 · Cited by 5
Fritzen, D. L., Nardy, G., Portes, M. C., et al. (2023) · Optical Materials X · doi:10.1016/j.omx.2023.100271 · Cited by 4
Self-citationBi doped LaOCl and LaOF thin films grown by pulsed laser deposition
Jaffar, B. M., Swart, H. C., Ahmed, H. A. A. S., et al. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e27247 · Cited by 4
Yepuri, V. (2025) · Results in Optics · doi:10.1016/j.rio.2025.100797 · Cited by 4
Wang, L., Lerner, S., Zhu, H., Cui, X., Zeng, B., Wei, F., Wendler, E., & Ronning, C. (2025) · Advanced Optical Materials · doi:10.1002/adom.202502568 · Cited by 4
First Tellurite Composite Fiber with NIR‐Driven Green Persistent Luminescence
Magalhães, E. S., Nasser, K., Ramachandran, A. V., et al. (2025) · Advanced Optical Materials · doi:10.1002/adom.202502249 · Cited by 4
Castaing, V., Sontakke, A. D., Fernández-Carrión, A. J., et al. (2018) · doi:10.1117/12.2294987 · Cited by 4
Cerro, P. R. D., Saarinen, M. J., Massera, J., et al. (2018) · International Conference on Transparent Optical Networks · doi:10.1109/icton.2018.8473916 · Cited by 3
Annurakshita, S., Lahti, V., Petit, L. C., & Bautista, G. (2022) · Optical Materials Express · doi:10.1364/ome.459936 · Cited by 3
Machado, R. C. L., Fonseca, K. T., Teixeira, V. C., et al. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.105965 · Cited by 3
Self-citationMulticolor tunable persistent luminescence mechanism in well-designed inorganic composites
Duan, Y., Li, S., Gu, K., et al. (2024) · Optics Letters · doi:10.1364/ol.522446 · Cited by 3
Exploring OH incorporation pathways in pulsed laser deposited EuOOH thin films
Nieto‐Pinero, E., Gorni, G., Caño, A., et al. (2024) · Applied Surface Science · doi:10.1016/j.apsusc.2024.160581 · Cited by 3
Fernandes, R. G., de Mattos, E. A., Silva, V. D. M., et al. (2024) · Materialia · doi:10.1016/j.mtla.2024.102222 · Cited by 3
Self-citationDerksen, M., Bergkamp, S., Kohnstamm, O., et al. (2024) · Optical Materials · doi:10.1016/j.optmat.2024.116220 · Cited by 3
Meneses, M., Meza, M. F. Á., Serrano, J. R. R., et al. (2024) · Thin Solid Films · doi:10.1016/j.tsf.2024.140568 · Cited by 3
Terbium-doped gadolinium garnet thin films grown by liquid phase epitaxy for scintillation detectors
Baillard, A., Douissard, P.-A., Loiko, P. A., Martin, T., Mathieu, E., & Camy, P. (2025) · RSC Advances · doi:10.1039/d5ra01784j · Cited by 3
Tin-mediated phase-controlled growth of γ-InSe thin films on Si (100) via molecular beam epitaxy
Salhi, A., Abutaha, A., Zekri, A., et al. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.164367 · Cited by 3
Porcar, S., Schmickler, M., Okcu, H., et al. (2025) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2025.100836 · Cited by 3
Liu, H., Kong, X., Zeng, J., et al. (2025) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5c03282 · Cited by 3
Insights into space-confined CVD growth of large-area monolayer h-BN thin films
Wang, H., Zhang, J., Tian, Y., et al. (2025) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2025.183287 · Cited by 3
Preparation of ternary spin-coated thin films by mixing binary As-S and As-Se glass solutions
Jančálek, J., Šlang, S., Jemelka, J., et al. (2022) · Journal of Non-Crystalline Solids X · doi:10.1016/j.nocx.2022.100142 · Cited by 3
Nsimama, P. D. (2018) · American Journal of Optics and Photonics · doi:10.11648/j.ajop.20180601.11 · Cited by 2
Preparation and characterization of new red luminescent fibers based on a multilayer structure
Zheng, L., Zhu, Y., Pang, Z., et al. (2021) · Textile Research Journal · doi:10.1177/0040517521997188 · Cited by 2
Spajić, I., Drev, S., Trstenjak, U., et al. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146849 · Cited by 2
Bauerecker, S., Roch, T., & Cammenga, H. K. (1996) · Berichte der Bunsengesellschaft für physikalische Chemie · doi:10.1002/bbpc.19961000909 · Cited by 1
Comparative study of the persistent luminescence in strontium-aluminate based polymer composites
Poulose, A. M., Shaikh, H., Anis, A., Alhamidi, A., Kumar, N. S., Elnour, A. Y., & Al-Zahrani, S. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.329 · Cited by 1
Ashby, M. F., Shercliff, H., & Cebon, D. (2019) · Materials · doi:10.1016/b978-0-08-102376-1.00013-5 · Cited by 1
Liquid-phase epitaxy and characterization of YAl3(BO3)4 thin layers coactivated by Er3+ and Yb3+
Volkova, E. A., Gorbachenya, K. N., Kisel, V. E., Naprasnikov, D. A., Koporulina, E. V., Yapaskurt, V. O., Maltsev, V. V., & Alpanova, R. R. (2024) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2024.124910 · Cited by 1
Leimane, M., Vitola, V., Laganovska, K., et al. (2025) · Materialia · doi:10.1016/j.mtla.2025.102426 · Cited by 1
Development of Thin Films Formed by Ti-Zr Alloys at Different Frequencies by the HiPIMS Technique
Lustosa, C. J. R., Stryhalski, J., Gonçalves, R. L. P., et al. (2023) · Materials Research · doi:10.1590/1980-5373-mr-2022-0566 · Cited by 1
Self-citation
Research works printed but not linked: 4
- Zarzycki J., 1991, Glasses and the Vitreous State
- Scholze H., 1991, Nature, Structure, and Properties
- Elliott S. R., 1990, Physics of Amorphous Materials
- Yang L., 2023, Recent Progress in Inorganic Afterglow Materials: Mechanisms, Persistent Luminescent Properties, Modulating Methods, and Bioimaging Applications Advanced Optical Materials, 11
Cited by
Optimization of inorganic rare-earth afterglow materials and their optoelectronic applications
Shen, F., Chen, Z., Wang, S., Yang, M., Chen, Y., Li, W.-G., & Tian, T. (2026) · Review of Materials Research · doi:10.1016/j.revmat.2026.100261 · Cited by 1
Li, Y., Huang, X., Duan, Y., et al. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.190826
Research advances in metal halides for flexible indirect X‐ray imaging
Xie, T., Xu, Y., Liu, D., et al. (2026) · FlexMat. · doi:10.1002/flm2.70131
Tetrahedral–octahedral cation chemistry underpinning spinel oxide functionality
Ma, T., Zhu, K., Zhou, L., et al. (2026) · Chinese Journal of Structural Chemistry · doi:10.1016/j.cjsc.2026.101115
Metadata
- Authors
- Giordano, L., Merízio, L. G., de Mattos, E. A., Nicolai, Y. M., da Silva, V. M. P., Marques, I. D., Teixeira, V. C., Bonturim, E., Gonçalves, R. R., Manzani, D., & Rodrigues, L. C. V.
- Affiliations
- Universidade de São Paulo (BR)
- Department of Fundamental Chemistry Institute of Chemistry University of São Paulo São Paulo Brazil
- Department of Chemistry and Molecular Physics São Carlos Institute of Chemistry University of São Paulo São Carlos São Paulo Brazil
- Universidade Presbiteriana Mackenzie (BR)
- Brazilian Synchrotron Light Laboratory Brazilian Center for Research in Energy and Materials Campinas Brazil
- ORCID
- Venue
- Advanced Optical Materials
- Publisher
- Wiley
- Published
- 2026-04
- Volume
- 14
- Issue
- 16
- ISSN
- 2195-1071 (ISSN-L)
- OpenAlex
- W7154061456
- Semantic Scholar
- 8bc933d0f40b0b84fd3893f3ec494c7cf697bb12
- Cited by
- 5
- References
- 260
- Citations by year
- 2026: 5
- FWCI
- 6.85
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0/ (vor, 12 d)
- doi.wiley.com/10.1002/tdm_license_1.1 (tdm)
- Locations
- Advanced Optical Materials (publishedVersion, cc-by)
- Funders
- Conselho Nacional de Desenvolvimento Científico e Tecnológico (408501/2024‐3, 309501/2025‐3, 304718/2023‐8, 405048/2021‐1, 175148/2024‐4, 303546/2025‐5)
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (88887.710854/2022‐00, 88887.653733/2021‐00, 88887.977218/2024‐00)
- Universidade Presbiteriana Mackenzie (2023/231006, 2022/221019, 2024/00989‐7)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Luminescence Properties of Advanced Materials
- Physical Sciences › Physics and Astronomy › Radiation › Radiation Detection and Scintillator Technologies
- Physical Sciences › Materials Science › Materials Chemistry › Luminescence and Fluorescent Materials
- Keywords
- persistent luminescence, thin films, glassy materials, luminescent glass, thin film growth, defect engineering, dopant distribution, polymer matrix, optical transparency, environmental stability, structure-property relationships, optical data storage, sensing, imaging, optoelectronic devices
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.