The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High Electron Mobility Thin‐Film Transistors Based on Solution‐Processed Semiconducting Metal Oxide Heterojunctions and Quasi‐Superlattices
Open accessAbstract
High mobility thin‐film transistor technologies that can be implemented using simple and inexpensive fabrication methods are in great demand because of their applicability in a wide range of emerging optoelectronics. Here, a novel concept of thin‐film transistors is reported that exploits the enhanced electron transport properties of low‐dimensional polycrystalline heterojunctions and quasi‐superlattices (QSLs) consisting of alternating layers of In 2 O 3, Ga 2 O 3, and ZnO grown by sequential spin casting of different precursors in air at low temperatures (180–200 °C). Optimized prototype QSL transistors exhibit band‐like transport with electron mobilities approximately a tenfold greater (25–45 cm 2 V−1 s−1) than single oxide devices (typically 2–5 cm 2 V−1 s−1). Based on temperature‐dependent electron transport and capacitance‐voltage measurements, it is argued that the enhanced performance arises from the presence of quasi 2D electron gas‐like systems formed at the carefully engineered oxide heterointerfaces. The QSL transistor concept proposed here can in principle extend to a range of other oxide material systems and deposition methods (sputtering, atomic layer deposition, spray pyrolysis, roll‐to‐roll, etc.) and can be seen as an extremely promising technology for application in next‐generation large area optoelectronics such as ultrahigh definition optical displays and large‐area microelectronics where high performance is a key requirement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reliability of GaN High-Electron-Mobility Transistors: State of the Art and Perspectives
Meneghesso, G., Verzellesi, G., Danesin, F., Rampazzo, F., Zanon, F., Tazzoli, A., Meneghini, M., & Zanoni, E. (2008) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2008.923743 · Cited by 675
Cited by
Metal oxides for optoelectronic applications
Yu, X., Marks, T. J., & Facchetti, A. (2016) · Nature Materials · doi:10.1038/nmat4599 · Cited by 1,596
Metal oxide semiconductor thin-film transistors for flexible electronics
Petti, L., Münzenrieder, N., Vogt, C., Faber, H., Büthe, L., Cantarella, G., Bottacchi, F., Anthopoulos, T. D., & Tröster, G. (2016) · Applied Physics Reviews · doi:10.1063/1.4953034 · Cited by 664
Self-citationWide Bandgap Oxide Semiconductors: from Materials Physics to Optoelectronic Devices
Shi, J., Zhang, J., Yang, L., Qu, M., Qi, D., & Zhang, K. H. L. (2021) · Advanced Materials · doi:10.1002/adma.202006230 · Cited by 619
Kim, T., Choi, C. H., Hur, J. S., Ha, D., Kuh, B. J., Kim, Y., Cho, M. H., Kim, S., & Jeong, J. K. (2023) · Advanced Materials · doi:10.1002/adma.202204663 · Cited by 290
Metadata
- Authors
- Lin, Y., Faber, H., Labram, J. G., Stratakis, E., Sygellou, L., Kymakis, E., Hastas, N. A., Li, R., Zhao, K., Amassian, A., Treat, N. D., McLachlan, M., & Anthopoulos, T. D.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2015-05-26
- Volume
- 2
- Issue
- 7
- Pages
- 1500058-1500058
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W1581456708
- Cited by
- 178
- References
- 1
- FWCI
- 7.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.