CoChat

Photodetectors Based on Organic–Inorganic Hybrid Lead Halide Perovskites

Open access
Zhou, Jiachen, Huang, Jia · 2018 · Advanced Science

The DOI matches its Crossref record; 157 of the 159 references it cites were found in a registry or an index.

Abstract

Recent years have witnessed skyrocketing research achievements in organic–inorganic hybrid lead halide perovskites (OIHPs) in the photovoltaic field. In addition to photovoltaics, more and more studies have focused on OIHPs‐based photodetectors in the past two years, due to the remarkable optoelectronic properties of OIHPs. This article summarizes the latest progress in this research field. To begin with, the factors influencing the performance of photodetectors are discussed, including both internal and external factors. In particular, the channel width and the incident power intensities should be taken into account to precisely and objectively evaluate and compare the output performance of different photodetectors. Next, photodetectors fabricated on single‐component perovskites in terms of different micromorphologies are discussed, namely, 3D thin‐film and single crystalline, 2D nanoplates, 1D nanowires, and 0D nanocrystals, respectively. Then, bilayer structured perovskite‐based photodetectors incorporating inorganic and organic semiconductors are discussed to improve the optoelectronic performance of their pristine counterparts. Additionally, flexible OIHPs‐based photodetectors are highlighted. Finally, a brief conclusion and outlook is given on the progress and challenges in the field of perovskites‐based photodetectors.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/advs.201700256

Cites

157 of 157 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Unit cell of an ideal cubic perovskite ABX3 (left), and their extended crystalline structured connected by corner‐sharing [BX6]4− octahedra (right). Reproduced with permission.39
Figure 1 Unit cell of an ideal cubic perovskite ABX3 (left), and their extended crystalline structured connected by corner‐sharing [BX6]4− octahedra (right). Reproduced with permission.39CC BY · PubMed Central
Figure 2 a) Crystalline structures of layer‐structured OIHPs analogues (BA)2(MA)n −1PbnI3 n +1 (n = 1, 2, and 3) derived from 3D perovskites. Reproduced with permission.51 Copyright 2016, American Chemical Society (ACS); b) UV–vis absorption spectrum of (BA)2(MA)n −1PbnI3 n +1 (n = 1, 2, and 3). Reproduced with permission.54 Copyright 2016, ACS; c) Comparison of the I light/I dark ratio at different light illumination and the film morphology between the island‐structured and the compact perovskite thin film. Reproduced with permission.68 Copyright 2015, ACS. Schematics of the device structures of: d) photodiode with vertical configuration, e) photoconductor, and f) phototransistor (bottom‐gate/top‐contact). g) Photocurrent and photoresponsivity versus different incident powers at a fixed wavelength. Reproduced with permission.85 Copyright 2015, Wiley‐VCH.
Figure 2 a) Crystalline structures of layer‐structured OIHPs analogues (BA)2(MA)n −1PbnI3 n +1 (n = 1, 2, and 3) derived from 3D perovskites. Reproduced with permission.51 Copyright 2016, American Chemical Society (ACS); b) UV–vis absorption spectrum of (BA)2(MA)n −1PbnI3 n +1 (n = 1, 2, and 3). Reproduced with permission.54 Copyright 2016, ACS; c) Comparison of the I light/I dark ratio at different light illumination and the film morphology between the island‐structured and the compact perovskite thin film. Reproduced with permission.68 Copyright 2015, ACS. Schematics of the device structures of: d) photodiode with vertical configuration, e) photoconductor, and f) phototransistor (bottom‐gate/top‐contact). g) Photocurrent and photoresponsivity versus different incident powers at a fixed wavelength. Reproduced with permission.85 Copyright 2015, Wiley‐VCH.CC BY · PubMed Central
Figure 3 a) Device structure of flexible OIHPs‐based PDs. b) I–V curves of PDs at different light intensities and a fixed wavelength. a,b) Reproduced with permission.80 Copyright 2014, Wiley‐VCH. c) Device structure of perovskite PDs with SC configuration. d) J–V characteristics of the PDs without (PD1) and with HBLs (PD2 with BCP and PD3 with PFN). c,d) Reproduced with permission.32 Copyright 2014, Macmillan Publishers. e) Transfer curves of OIHPs‐based PDs measured in the dark and at a light illumination of 10 mW cm−2. f) Output characteristics of OIHPs‐based PDs at light illumination with gate voltages ranging from −40 to 40 V. e,f) Reproduced with permission.25 Copyright 2015, Macmillan Publishers. g) J–V characteristics of OIHPs‐based PDs measured at a light illumination of 10 mW cm−2 and at dark conditions. Reproduced with permission.35 Copyright 2015, Wiley‐VCH.
Figure 3 a) Device structure of flexible OIHPs‐based PDs. b) I–V curves of PDs at different light intensities and a fixed wavelength. a,b) Reproduced with permission.80 Copyright 2014, Wiley‐VCH. c) Device structure of perovskite PDs with SC configuration. d) J–V characteristics of the PDs without (PD1) and with HBLs (PD2 with BCP and PD3 with PFN). c,d) Reproduced with permission.32 Copyright 2014, Macmillan Publishers. e) Transfer curves of OIHPs‐based PDs measured in the dark and at a light illumination of 10 mW cm−2. f) Output characteristics of OIHPs‐based PDs at light illumination with gate voltages ranging from −40 to 40 V. e,f) Reproduced with permission.25 Copyright 2015, Macmillan Publishers. g) J–V characteristics of OIHPs‐based PDs measured at a light illumination of 10 mW cm−2 and at dark conditions. Reproduced with permission.35 Copyright 2015, Wiley‐VCH.CC BY · PubMed Central
Figure 4 a) Schematic diagram of the ITC process (left) and pictures of the as‐synthesized MAPbBr3 and MAPbI3 single crystals (right). Reproduced with permission.94 Copyright 2015, Macmillan Publishers Limited. b) Device structure and c) spectral photocurrent of MAPbCl3 single crystal‐based PDs. b,c) Reproduced with permission.95 Copyright 2016, Wiley‐VCH. d) Schematic diagram of the AVC technique (left) and SEM image of the as‐synthesized MAPbBr3 single crystals (right, scale bar = 50 µm); e) I–V characteristics measured at different light intensities. d,e) Reproduced with permission.97 Copyright 2015, Macmillan Publishers. f) Photos of MAPbI3 bulk single crystals fabricated by the BSSG technique. g) Responsivity versus incident‐light density for MAPbI3 single crystal PDs (MSCP) and their polycrystalline counterpart (MPFP). f,g) Reproduced with permission.100 Copyright 2015, Macmillan Publishers.
Figure 4 a) Schematic diagram of the ITC process (left) and pictures of the as‐synthesized MAPbBr3 and MAPbI3 single crystals (right). Reproduced with permission.94 Copyright 2015, Macmillan Publishers Limited. b) Device structure and c) spectral photocurrent of MAPbCl3 single crystal‐based PDs. b,c) Reproduced with permission.95 Copyright 2016, Wiley‐VCH. d) Schematic diagram of the AVC technique (left) and SEM image of the as‐synthesized MAPbBr3 single crystals (right, scale bar = 50 µm); e) I–V characteristics measured at different light intensities. d,e) Reproduced with permission.97 Copyright 2015, Macmillan Publishers. f) Photos of MAPbI3 bulk single crystals fabricated by the BSSG technique. g) Responsivity versus incident‐light density for MAPbI3 single crystal PDs (MSCP) and their polycrystalline counterpart (MPFP). f,g) Reproduced with permission.100 Copyright 2015, Macmillan Publishers.CC BY · PubMed Central
Figure 5 a) Crystalline structure of a 2D MAPbI3 with single‐unit‐cell thick (left, top), schematic diagram of a 2D MAPbI3 preparation process (left, bottom), and the AFM topography images of 2D MAPbI3 with triangular (right, top) and hexagonal morphologies (right, bottom). Scale bar: 2 µm. b) I–V characteristics of the 2D MAPbI3‐based PDs measured at different light intensities. a,b) Reproduced with permission.56 Copyright 2016, ACS. c) The Schematic diagram of the perovskite conversion from PbI2 flakes into MAPbI3 under MAI vapor atmosphere. d) Schematic and optical images of a BN‐protected GPG device (left) and transfer curves of the devices measured at positive (0.8 V) and negative (−0.8 V) drain biases at dark and 77 K (right). e) Schematic and optical images of BN‐protected GWPG devices (left) and I DS–V DS characteristics measured at dark with different gate biases (right). c–e) Reproduced with permission.72 Copyright 2015, ACS; f) I–V curves of (C4H9NH3)2PbBr4‐based PDs at different incident powers. Reproduced with permission.53 Copyright 2016, ACS.
Figure 5 a) Crystalline structure of a 2D MAPbI3 with single‐unit‐cell thick (left, top), schematic diagram of a 2D MAPbI3 preparation process (left, bottom), and the AFM topography images of 2D MAPbI3 with triangular (right, top) and hexagonal morphologies (right, bottom). Scale bar: 2 µm. b) I–V characteristics of the 2D MAPbI3‐based PDs measured at different light intensities. a,b) Reproduced with permission.56 Copyright 2016, ACS. c) The Schematic diagram of the perovskite conversion from PbI2 flakes into MAPbI3 under MAI vapor atmosphere. d) Schematic and optical images of a BN‐protected GPG device (left) and transfer curves of the devices measured at positive (0.8 V) and negative (−0.8 V) drain biases at dark and 77 K (right). e) Schematic and optical images of BN‐protected GWPG devices (left) and I DS–V DS characteristics measured at dark with different gate biases (right). c–e) Reproduced with permission.72 Copyright 2015, ACS; f) I–V curves of (C4H9NH3)2PbBr4‐based PDs at different incident powers. Reproduced with permission.53 Copyright 2016, ACS.CC BY · PubMed Central
Figure 6 a) Schematic illustration of the PNWs synthesis by a low‐temperature solution‐processed slip‐coating method (left) and TEM image of the as‐synthesized PNWs (right). b) I–V characteristics of the PNWs‐based PDs at dark and various light intensities. a,b) Reproduced with permission.119 Copyright 2014, ACS. c) Schematic illustration of the modified EISA technique (left) and optical images of the as‐synthesized PNWs grown from the edge of the substrate (right). Reproduced with permission.59 Copyright 2015, Royal Society of Chemistry (RSC). d) Schematic illustration of the FGAVC technique. e) Photoresponsivity and photoconductive gain against different light wavelengths. d,e) Reproduced with permission.121 Copyright 2017, ACS.
Figure 6 a) Schematic illustration of the PNWs synthesis by a low‐temperature solution‐processed slip‐coating method (left) and TEM image of the as‐synthesized PNWs (right). b) I–V characteristics of the PNWs‐based PDs at dark and various light intensities. a,b) Reproduced with permission.119 Copyright 2014, ACS. c) Schematic illustration of the modified EISA technique (left) and optical images of the as‐synthesized PNWs grown from the edge of the substrate (right). Reproduced with permission.59 Copyright 2015, Royal Society of Chemistry (RSC). d) Schematic illustration of the FGAVC technique. e) Photoresponsivity and photoconductive gain against different light wavelengths. d,e) Reproduced with permission.121 Copyright 2017, ACS.CC BY · PubMed Central
Figure 7 a) Reversible anion exchange reaction of MAPbX3 NCs (top) and photos of the mixed halide MAPbX3 colloidal solutions (bottom). b) I–V characteristics of MAPbBr3 measured at 365 and 505 nm laser and dark conditions. c) Photocurrents of the mixed halide MAPbX3 as a function of x measured at 365, 505, and 617 nm. a–c) Reproduced with permission.60 Copyright 2015, ACS. d) HRTEM image of MAPbBr3 NCs. e) Photos of mixed APbX3 colloidal NCs irradiated by UV lamp (top) and PL spectra of the mixed APbX3 colloidal NCs, where A = MA+ and Cs+ and X = Cl−, Br−, and I− (bottom). f) I–V characteristics of APbX3 under 365 nm laser and at dark, where A = MA+, Cs+, and FA+ and X = Cl− and I−. d–f) Reproduced with permission.61 Copyright 2016, RSC.
Figure 7 a) Reversible anion exchange reaction of MAPbX3 NCs (top) and photos of the mixed halide MAPbX3 colloidal solutions (bottom). b) I–V characteristics of MAPbBr3 measured at 365 and 505 nm laser and dark conditions. c) Photocurrents of the mixed halide MAPbX3 as a function of x measured at 365, 505, and 617 nm. a–c) Reproduced with permission.60 Copyright 2015, ACS. d) HRTEM image of MAPbBr3 NCs. e) Photos of mixed APbX3 colloidal NCs irradiated by UV lamp (top) and PL spectra of the mixed APbX3 colloidal NCs, where A = MA+ and Cs+ and X = Cl−, Br−, and I− (bottom). f) I–V characteristics of APbX3 under 365 nm laser and at dark, where A = MA+, Cs+, and FA+ and X = Cl− and I−. d–f) Reproduced with permission.61 Copyright 2016, RSC.CC BY · PubMed Central
Figure 8 a) Schematic device architecture of hybrid perovskite–graphene PDs. b) PL spectra of pristine perovskite and hybrid perovskite–graphene excited by 532 nm laser. c) Transfer curves of hybrid perovskite–graphene PDs measured at different light intensities and at V D of 0.1 V. a–c) Reproduced with permission.70 Copyright 2014, Wiley‐VCH. d) Transfer characteristics of hybrid perovskite/SWNTs PDs operating under light. Reproduced with permission.125 Copyright 2017, Wiley‐VCH. e) Schematic device architecture of hybrid perovskite–MoS2 PDs. f) Energy band diagram of hybrid perovskite–MoS2 PDs irradiated by laser. g) Transfer curves of hybrid perovskite–MoS2 and pristine MoS2 PDs under light illumination and at dark. e–g) Reproduced with permission.74 Copyright 2016, Wiley‐VCH. h) Proposed working mechanism of the perovskite/WS2 PDs at dark and under illumination. Reproduced with permission.69 Copyright 2016, Wiley‐VCH.
Figure 8 a) Schematic device architecture of hybrid perovskite–graphene PDs. b) PL spectra of pristine perovskite and hybrid perovskite–graphene excited by 532 nm laser. c) Transfer curves of hybrid perovskite–graphene PDs measured at different light intensities and at V D of 0.1 V. a–c) Reproduced with permission.70 Copyright 2014, Wiley‐VCH. d) Transfer characteristics of hybrid perovskite/SWNTs PDs operating under light. Reproduced with permission.125 Copyright 2017, Wiley‐VCH. e) Schematic device architecture of hybrid perovskite–MoS2 PDs. f) Energy band diagram of hybrid perovskite–MoS2 PDs irradiated by laser. g) Transfer curves of hybrid perovskite–MoS2 and pristine MoS2 PDs under light illumination and at dark. e–g) Reproduced with permission.74 Copyright 2016, Wiley‐VCH. h) Proposed working mechanism of the perovskite/WS2 PDs at dark and under illumination. Reproduced with permission.69 Copyright 2016, Wiley‐VCH.CC BY · PubMed Central
Figure 9 a) UV–vis absorption spectra of MAPbI3, PDPP3T, and MAPbI3/PDPP3T hybrid thin films. b) Schematic illustration of the fabrication of flexible perovskite/PDPP3T hybrid PDs. c) I–V characteristics of the hybrid PDs measured at different wavelengths. d) Energy levels diagram of MAPbI3/PDPP3T hybrid PDs. a–d) Reproduced with permission.87 Copyright 2016, Wiley‐VCH. e) Schematic diagram of perovskite/P3HT/graphene PDs. Reproduced with permission.75 Copyright 2017, ACS.
Figure 9 a) UV–vis absorption spectra of MAPbI3, PDPP3T, and MAPbI3/PDPP3T hybrid thin films. b) Schematic illustration of the fabrication of flexible perovskite/PDPP3T hybrid PDs. c) I–V characteristics of the hybrid PDs measured at different wavelengths. d) Energy levels diagram of MAPbI3/PDPP3T hybrid PDs. a–d) Reproduced with permission.87 Copyright 2016, Wiley‐VCH. e) Schematic diagram of perovskite/P3HT/graphene PDs. Reproduced with permission.75 Copyright 2017, ACS.CC BY · PubMed Central
Figure 10 a) I–t curves of flexible PDs bended at five different curvatures at 3 V and irradiated by 365 and 780 nm wavelengths. b) I–V characteristics of flexible PDs bended at fixed curvatures and different folding cycles. a,b) Reproduced with permission.80 Copyright 2014, Wiley‐VCH. c) I–V curves of flexible PDs measured in the dark and under 650 nm wavelength illumination at different radii. d) Intensity profile measured by mapping the photocurrent of each pixel at compressive state (r = 18 mm). The photocurrents were transformed into four different grey levels. c,d) Reproduced with permission.142 Copyright 2016, Wiley‐VCH. e) Photocurrent attenuation of flexible OIHPs‐based PDs based on PEN/Au NWs (PD1) and ITO/PET (PD2) electrodes at zero bias under different bending curvatures. Reproduced with permission.78 Copyright 2016, ACS.
Figure 10 a) I–t curves of flexible PDs bended at five different curvatures at 3 V and irradiated by 365 and 780 nm wavelengths. b) I–V characteristics of flexible PDs bended at fixed curvatures and different folding cycles. a,b) Reproduced with permission.80 Copyright 2014, Wiley‐VCH. c) I–V curves of flexible PDs measured in the dark and under 650 nm wavelength illumination at different radii. d) Intensity profile measured by mapping the photocurrent of each pixel at compressive state (r = 18 mm). The photocurrents were transformed into four different grey levels. c,d) Reproduced with permission.142 Copyright 2016, Wiley‐VCH. e) Photocurrent attenuation of flexible OIHPs‐based PDs based on PEN/Au NWs (PD1) and ITO/PET (PD2) electrodes at zero bias under different bending curvatures. Reproduced with permission.78 Copyright 2016, ACS.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 157 references

Research works printed but not linked: 3

  1. Shi Z., 2017, Adv. Mater., 29, 16005005
  2. Xie C., 2016, Adv. Funct. Mater., 1603886
  3. Wang Z., 2015, Nano Res., 6, 8401

Cited by

Metadata

Authors
Zhou, J., & Huang, J.
Affiliations
Tongji University (CN)
Corresponding author
Huang, Jia
Venue
Advanced Science
Publisher
Wiley
Published
2017-09-15
Volume
5
Issue
1
Pages
1700256-1700256
ISSN
2198-3844 (ISSN-L)
OpenAlex
W2755294117
Cited by
307
References
159
Citations by year
2026: 21 · 2025: 34 · 2024: 41 · 2023: 35 · 2022: 26 · 2021: 44 · 2020: 44 · 2019: 38 · 2018: 23 · 2017: 1
FWCI
1.32
Type
journal article
Language
en
Open access
Locations
  • Advanced Science (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
Funders
National Natural Science Foundation of China (51373123)
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
  • Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
Keywords
organic-inorganic hybrid perovskites, lead halide perovskites, perovskite photodetectors, flexible photodetectors, optoelectronic properties, channel width, performance evaluation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.