The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Uncovering the Effect of Lattice Strain and Oxygen Deficiency on Electrocatalytic Activity of Perovskite Cobaltite Thin Films
Open accessAbstract
Developing cost effective electrocatalysts with high oxygen evolution reaction (OER) activity is essential for large‐scale application of many electrochemical energy systems. Although the impacts of either lattice strain or oxygen defects on the OER performance of oxide catalysts have been extensively investigated, the effects of both factors are normally treated separately. In this work, the coupled effects of both strain and oxygen deficiency on the electrocatalytic activity of La 0.7 Sr 0.3 CoO 3−δ (LSC) thin films grown on single crystal substrates (LaAlO3 (LAO) and SrTiO3 (STO)) are investigated. Electrochemical tests show that the OER activities of LSC films are higher under compression than under tension, and are diminished as oxygen vacancies are introduced by vacuum annealing. Both experimental and computational results indicate that the LSC films under tension (e.g., LSC/STO) have larger oxygen deficiency than the films under compression (e.g., LSC/LAO), which attribute to smaller oxygen vacancy formation energy. Such strain‐induced excessive oxygen vacancies in the LSC/STO increases the e g state occupancy and enlarges the energy gap between the O 2p and Co 3d band, resulting in lower OER activity. Understanding the critical role of strain–defect coupling is important for achieving the rational design of highly active and durable catalysts for energy devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Defect Engineering in Single-Layer MoS 2 Using Heavy Ion Irradiation
He, Z., Zhao, R., Chen, X., Chen, H., Zhu, Y., Su, H., Huang, S., Xue, J., Dai, J., Cheng, S., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17145 · Cited by 213
Self-citation
Cited by
Dielectric Loss Mechanism in Electromagnetic Wave Absorbing Materials
Qin, M., Zhang, L., & Wu, H. (2022) · Advanced Science · doi:10.1002/advs.202105553 · Cited by 1,497
Self-citationAdvanced Transition Metal‐Based OER Electrocatalysts: Current Status, Opportunities, and Challenges
Zhang, K., & Zou, R. (2021) · Small · doi:10.1002/smll.202100129 · Cited by 1,028
The roles of oxygen vacancies in electrocatalytic oxygen evolution reaction
Zhu, K., Shi, F., Zhu, X., & Yang, W. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104761 · Cited by 1,018
The role of oxygen vacancies of ABO3 perovskite oxides in the oxygen reduction reaction
Ji, Q., Bi, L., Zhang, J., Cao, H., & Zhao, X. S. (2020) · Energy & Environmental Science · doi:10.1039/d0ee00092b · Cited by 949
High-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities
Xin, Y., Li, S., Qian, Y., Zhu, W., Yuan, H., Jiang, P., Guo, R., & Wang, L. (2020) · ACS Catalysis · doi:10.1021/acscatal.0c03617 · Cited by 840
Zhang, L., Jang, H., Liu, H., Kim, M. G., Yang, D., Liu, S., Liu, X., & Cho, J. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202106631 · Cited by 680
Self-citationRecent Advances in Perovskite‐Type Oxides for Energy Conversion and Storage Applications
Sun, C., Alonso, J. A., & Bian, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000459 · Cited by 634
Advanced High Entropy Perovskite Oxide Electrocatalyst for Oxygen Evolution Reaction
Nguyen, T. X., Liao, Y., Lin, C., Su, Y., & Ting, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202101632 · Cited by 602
Designing High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Anionic defect engineering of transition metal oxides for oxygen reduction and evolution reactions
Zhu, Y., Liu, X., Jin, S., Chen, H., Lee, W., Liu, M., & Chen, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta12477a · Cited by 378
Self-citationLattice‐Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction
Hou, Z., Cui, C., Li, Y., Gao, Y., Zhu, D., Gu, Y., Pan, G., Zhu, Y., & Zhang, T. (2023) · Advanced Materials · doi:10.1002/adma.202209876 · Cited by 365
Self-citationHumayun, M., Li, Z., Israr, M., Khan, A., Luo, W., Wang, C., & Shao, Z. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00553 · Cited by 352
Arandiyan, H., S. Mofarah, S., Sorrell, C. C., Doustkhah, E., Sajjadi, B., Hao, D., Wang, Y., Sun, H., Ni, B.-J., Rezaei, M., et al. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00639d · Cited by 337
Heterointerface engineering for enhancing the electrochemical performance of solid oxide cells
Zhao, C., Li, Y., Zhang, W., Zheng, Y., Lou, X., Yu, B., Chen, J., Chen, Y., Liu, M., & Wang, J. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02230a · Cited by 319
Self-citationZhu, Y., Zhang, L., Zhao, B., Chen, H., Liu, X., Zhao, R., Wang, X., Liu, J., Chen, Y., & Liu, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901783 · Cited by 314
Self-citationDo, V.-H., & Lee, J.-M. (2022) · ACS Nano · doi:10.1021/acsnano.2c08919 · Cited by 292
Hwang, J., Feng, Z., Charles, N., Wang, X. R., Lee, D., Stoerzinger, K. A., Muy, S., Rao, R. R., Lee, D., Jacobs, R., et al. (2019) · Materials Today · doi:10.1016/j.mattod.2019.03.014 · Cited by 290
Self-citationEngineering electrocatalyst nanosurfaces to enrich the activity by inducing lattice strain
Maiti, S., Maiti, K., Curnan, M. T., Kim, K., Noh, K.-J., & Han, J. W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00074h · Cited by 278
The electronic structure of transition metal oxides for oxygen evolution reaction
Wang, H., Zhang, K. H. L., Hofmann, J. P., de la Peña O'Shea, V. A., & Oropeza, F. E. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta03732c · Cited by 277
Influencing electrocatalytic processes through topographically disordered atomic sites
Prabhu, P., & Lee, J.-M. (2023) · Chem Catalysis · doi:10.1016/j.checat.2023.100621 · Cited by 84
Wang, L., Peng, C., Lin, H., & Zhao, B. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c02017 · Cited by 51
He, Z., Guo, Z., Wa, Q., Zhong, X., Wang, X., & Chen, Y. (2020) · Journal of Materials Research · doi:10.1557/jmr.2019.325 · Cited by 21
Self-citation
Metadata
- Authors
- Liu, X., Zhang, L., Zheng, Y., Guo, Z., Zhu, Y., Chen, H., Li, F., Liu, P., Yu, B., Wang, X., Liu, J., Chen, Y., & Liu, M.
- Venue
- Advanced Science
- Publisher
- Wiley
- Published
- 2019-01-30
- Volume
- 6
- Issue
- 6
- Pages
- 1801898-1801898
- ISSN
- 2198-3844 (ISSN-L)
- OpenAlex
- W2914142112
- Cited by
- 235
- References
- 1
- FWCI
- 5.41
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.