The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
The Thermoelectric Properties of Bismuth Telluride
Open accessAbstract
Bismuth telluride is the working material for most Peltier cooling devices and thermoelectric generators. This is because Bi 2 Te 3 (or more precisely its alloys with Sb 2 Te 3 for p‐type and Bi 2 Se 3 for n‐type material) has the highest thermoelectric figure of merit, zT, of any material around room temperature. Since thermoelectric technology will be greatly enhanced by improving Bi 2 Te 3 or finding a superior material, this review aims to identify and quantify the key material properties that make Bi 2 Te 3 such a good thermoelectric. The large zT can be traced to the high band degeneracy, low effective mass, high carrier mobility, and relatively low lattice thermal conductivity, which all contribute to its remarkably high thermoelectric quality factor. Using literature data augmented with newer results, these material parameters are quantified, giving clear insight into the tailoring of the electronic band structure of Bi 2 Te 3 by alloying, or reducing thermal conductivity by nanostructuring. For example, this analysis clearly shows that the minority carrier excitation across the small bandgap significantly limits the thermoelectric performance of Bi 2 Te 3, even at room temperature, showing that larger bandgap alloys are needed for higher temperature operation. Such effective material parameters can also be used for benchmarking future improvements in Bi 2 Te 3 or new replacement materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
Projector augmented-wave method
Blöchl, P. E. (1994) · Physical Review B · doi:10.1103/physrevb.50.17953 · Cited by 92,732
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Ab initio molecular dynamics for liquid metals
Kresse, G., & Hafner, J. (1993) · Physical Review B · doi:10.1103/physrevb.47.558 · Cited by 45,727
Colloquium : Topological insulators
Hasan, M. Z., & Kane, C. L. (2010) · Reviews of Modern Physics · doi:10.1103/revmodphys.82.3045 · Cited by 19,930
Commentary: The Materials Project: A materials genome approach to accelerating materials innovation
Jain, A., Ong, S. P., Hautier, G., Chen, W., Richards, W. D., Dacek, S., Cholia, S., Gunter, D., Skinner, D., Ceder, G., et al. (2013) · APL Materials · doi:10.1063/1.4812323 · Cited by 13,094
Self-citationTopological insulators in Bi2Se3, Bi2Te3 and Sb2Te3 with a single Dirac cone on the surface
Zhang, H., Liu, C.-X., Qi, X.-L., Dai, X., Fang, Z., & Zhang, S.-C. (2009) · Nature Physics · doi:10.1038/nphys1270 · Cited by 6,359
BoltzTraP. A code for calculating band-structure dependent quantities
Madsen, G. K. H., & Singh, D. J. (2006) · Computer Physics Communications · doi:10.1016/j.cpc.2006.03.007 · Cited by 6,208
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Cited by
Halide Perovskites: Thermal Transport and Prospects for Thermoelectricity
Haque, M. A., Kee, S., Villalva, D. R., Ong, W., & Baran, D. (2020) · Advanced Science · doi:10.1002/advs.201903389 · Cited by 270
A comprehensive review on Bi2Te3‐based thin films: Thermoelectrics and beyond
Tang, X., Li, Z., Liu, W., Zhang, Q., & Uher, C. (2022) · Interdisciplinary Materials · doi:10.1002/idm2.12009 · Cited by 270
Metadata
- Authors
- Witting, I. T., Chasapis, T. C., Ricci, F., Peters, M., Heinz, N. A., Hautier, G., & Snyder, G. J.
- Venue
- Advanced Electronic Materials
- Publisher
- Wiley
- Published
- 2019-04-05
- Volume
- 5
- Issue
- 6
- ISSN
- 2199-160X (ISSN-L)
- OpenAlex
- W2929776595
- Cited by
- 834
- References
- 105
- FWCI
- 26.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.