The DOI matches its Crossref record.
Paper‐Based Energy‐Storage Devices Comprising Carbon Fiber‐Reinforced Polypyrrole‐Cladophora Nanocellulose Composite Electrodes
Abstract
Composites of polypyrrole (PPy) and Cladophora nanocellulose, reinforced with 8 μm‐thick chopped carbon filaments, can be used as electrode materials to obtain paper‐based energy‐storage devices with unprecedented performance at high charge and discharge rates. Charge capacities of more than 200 C g−1 (PPy) are obtained for paper‐based electrodes at potential scan rates as high as 500 mV s−1, whereas cell capacitances of ∼60–70 F g−1 (PPy) are reached for symmetric supercapacitor cells with capacitances up to 3.0 F (i.e.,0.48 F cm−2) when charged to 0.6 V using current densities as high as 31 A g−1 based on the PPy weight (i.e., 99 mA cm−2). Energy and power densities of 1.75 Wh kg−1 and 2.7 kW kg−1, respectively, are obtained when normalized with respect to twice the PPy weight of the smaller electrode. No loss in cell capacitance is seen during charging/discharging at 7.7 A g−1 (PPy) over 1500 cycles. It is proposed that the nonelectroactive carbon filaments decrease the contact resistances and the resistance of the reduced PPy composite. The present straightforward approach represents significant progress in the development of low‐cost and environmentally friendly paper‐based energy‐storage devices for high‐power applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nanocellulose: a promising nanomaterial for advanced electrochemical energy storage
Chen, W., Yu, H., Lee, S.-Y., Wei, T., Li, J., & Fan, Z. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00790f · Cited by 766
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Zhu, M., Huang, Y., Deng, Q., Zhou, J., Pei, Z., Xue, Q., Huang, Y., Wang, Z., Li, H., Huang, Q., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600969 · Cited by 731
Polypyrrole-coated paper for flexible solid-state energy storage
Yuan, L., Yao, B., Hu, B., Huo, K., Chen, W., & Zhou, J. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23977a · Cited by 623
Materials Design and System Construction for Conventional and New‐Concept Supercapacitors
Wu, Z., Li, L., Yan, J., & Zhang, X. (2017) · Advanced Science · doi:10.1002/advs.201600382 · Cited by 470
Paper‐Based Electrodes for Flexible Energy Storage Devices
Yao, B., Zhang, J., Kou, T., Song, Y., Liu, T., & Li, Y. (2017) · Advanced Science · doi:10.1002/advs.201700107 · Cited by 464
Biopolymer nanofibrils: Structure, modeling, preparation, and applications
Ling, S., Chen, W., Fan, Y., Zheng, K., Jin, K., Yu, H., Buehler, M. J., & Kaplan, D. L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.004 · Cited by 463
Du, X., Zhang, Z., Liu, W., & Deng, Y. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.04.001 · Cited by 426
Preparation, properties and applications of nanocellulosic materials
Mondal, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.050 · Cited by 387
Flexible Electronics Based on Micro/Nanostructured Paper
Zhang, Y., Zhang, L., Cui, K., Ge, S., Cheng, X., Yan, M., Yu, J., & Liu, H. (2018) · Advanced Materials · doi:10.1002/adma.201801588 · Cited by 380
3D printing using plant-derived cellulose and its derivatives: A review
Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J., & Ni, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 340
Lai, C., Zhou, Z., Zhang, L., Wang, X., Zhou, Q., Zhao, Y., Wang, Y., Wu, X.-F., Zhu, Z., & Fong, H. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.082 · Cited by 334
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
Tao, J., Liu, N., Ma, W., Ding, L., Li, L., Su, J., & Gao, Y. (2013) · Scientific Reports · doi:10.1038/srep02286 · Cited by 287
Zhao, D., Zhang, Q., Chen, W., Yi, X., Liu, S., Wang, Q., Liu, Y., Li, J., Li, X., & Yu, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01852 · Cited by 285
Cellulose‐based Supercapacitors: Material and Performance Considerations
Wang, Z., Tammela, P., Strømme, M., & Nyholm, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700130 · Cited by 279
Self-citationWang, Z., Carlsson, D. O., Tammela, P., Hua, K., Zhang, P., Nyholm, L., & Strømme, M. (2015) · ACS Nano · doi:10.1021/acsnano.5b02846 · Cited by 273
Self-citationNanocellulose for Energy Storage Systems: Beyond the Limits of Synthetic Materials
Kim, J., Lee, D., Lee, Y., Chen, W., & Lee, S. (2019) · Advanced Materials · doi:10.1002/adma.201804826 · Cited by 270
Hokkanen, S., Repo, E., Suopajärvi, T., Liimatainen, H., Niinimaa, J., & Sillanpää, M. (2014) · Cellulose · doi:10.1007/s10570-014-0240-4 · Cited by 265
Metadata
- Authors
- Razaq, A., Nyholm, L., Sjödin, M., Strømme, M., & Mihranyan, A.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-02-08
- Volume
- 2
- Issue
- 4
- Pages
- 445-454
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2004163607
- Cited by
- 172
- References
- 0
- FWCI
- 7.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.