The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
High Thermoelectric Figure of Merit in PbTe Alloys Demonstrated in PbTe–CdTe
Abstract
PbTe alloys have been the most efficient materials for thermoelectric power generation since the 1950s. In addition to the observed lattice thermal conductivity reduction by alloy scattering, recent efforts targeting electronic‐transport enhancement through band structure engineering have demonstrated a design route to achieve extraordinary thermoelectric performance. Guided by these recent results, the current work discusses the influence of alloying CdTe in p‐type PbTe where the solubility is strongly temperature‐dependent. Beneficial changes to the band structure and effective scattering of phonons are concurrently inferred when the PbTe–CdTe precipitate composite is expected to become a solid solution at high temperature, enhancing the peak thermoelectric figure of merit to ~1.7. This work emphasizes the importance of solid solution alloys of PbTe for thermoelectric power‐generation applications and also provides an upper limit of about 1 micrometer to the average distance between interfaces above which phonon scattering by composite interfaces is ineffectual.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Self-citationCooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems
Bell, L. E. (2008) · Science · doi:10.1126/science.1158899 · Cited by 6,082
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
Convergence of electronic bands for high performance bulk thermoelectrics
Pei, Y., Shi, X., LaLonde, A., Wang, H., Chen, L., & Snyder, G. J. (2011) · Nature · doi:10.1038/nature09996 · Cited by 4,263
Self-citationThermoelectric Cooling and Power Generation
DiSalvo, F. J. (1999) · Science · doi:10.1126/science.285.5428.703 · Cited by 3,240
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
Introduction to Thermoelectricity
Goldsmid, H. J. (2010) · Springer Series in Materials Science · doi:10.1007/978-3-642-00716-3 · Cited by 1,505
The Scattering of Low-Frequency Lattice Waves by Static Imperfections
Klemens, P. G. (1955) · Proceedings of the Physical Society. Section A · doi:10.1088/0370-1298/68/12/303 · Cited by 1,457
Perspectives on thermoelectrics: from fundamentals to device applications
Zebarjadi, M., Esfarjani, K., Dresselhaus, M. S., Ren, Z. F., & Chen, G. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02497c · Cited by 1,365
Semiconductor thermoelements and thermo-electric cooling
(1960) · Solar Energy · doi:10.1016/0038-092x(60)90073-6 · Cited by 1,177
Effect of Point Imperfections on Lattice Thermal Conductivity
Callaway, J., & von Baeyer, H. C. (1960) · Physical Review · doi:10.1103/physrev.120.1149 · Cited by 1,168
Nanostructured Thermoelectrics: The New Paradigm?
Kanatzidis, M. G. (2010) · Chemistry of Materials · doi:10.1021/cm902195j · Cited by 1,153
Lattice Thermal Conductivity of Disordered Semiconductor Alloys at High Temperatures
Abeles, B. (1963) · Physical Review · doi:10.1103/physrev.131.1906 · Cited by 1,148
Goldsmid, H. J. (1964) · Springer eBooks · doi:10.1007/978-1-4899-5723-8 · Cited by 1,058
Strained endotaxial nanostructures with high thermoelectric figure of merit
Biswas, K., He, J., Zhang, Q., Wang, G., Uher, C., Dravid, V. P., & Kanatzidis, M. G. (2011) · Nature Chemistry · doi:10.1038/nchem.955 · Cited by 1,034
Semiconducting Lead Chalcogenides
Ravich, Y. I., Efimova, B. A., & Smirnov, I. A. (1970) · Springer eBooks · doi:10.1007/978-1-4684-8607-0 · Cited by 904
High thermoelectric figure of merit in heavy hole dominated PbTe
Pei, Y., LaLonde, A., Iwanaga, S., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00456a · Cited by 784
Self-citationLead telluride alloy thermoelectrics
LaLonde, A. D., Pei, Y., Wang, H., & Jeffrey Snyder, G. (2011) · Materials Today · doi:10.1016/s1369-7021(11)70278-4 · Cited by 561
Self-citationReevaluation of PbTe1−xIx as high performance n-type thermoelectric material
LaLonde, A. D., Pei, Y., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01314a · Cited by 416
Self-citationHigh Thermoelectric Figure of Merit and Nanostructuring in Bulk p‐type Na1−xPbmSbyTem+2
Poudeu, P. F. P., D'Angelo, J., Downey, A. D., Short, J. L., Hogan, T. P., & Kanatzidis, M. G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600865 · Cited by 397
The Thermoelectric Figure of Merit and its Relation to Thermoelectric Generators†
CHASMAR, R. P., & STRATTON, R. (1959) · Journal of Electronics and Control · doi:10.1080/00207215908937186 · Cited by 391
Girard, S. N., He, J., Zhou, X., Shoemaker, D., Jaworski, C. M., Uher, C., Dravid, V. P., Heremans, J. P., & Kanatzidis, M. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja206380h · Cited by 349
Jeng, M.-S., Yang, R., Song, D., & Chen, G. (2008) · Journal of Heat Transfer · doi:10.1115/1.2818765 · Cited by 305
Lead Chalcogenides: Physics and Applications
Khokhlov, D. R. (2002) · Medical Entomology and Zoology · Cited by 212
Energy Bands of PbTe, PbSe, and PbS
Lin, P. J., & Kleinman, L. (1966) · Physical Review · doi:10.1103/physrev.142.478 · Cited by 194
Pei, Y., Heinz, N. A., LaLonde, A., & Snyder, G. J. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01928g · Cited by 178
Self-citationAndroulakis, J., Todorov, I. S., Chung, D. Y., Ballıkaya, S., Wang, G., Uher, C., & Kanatzidis, M. G. (2010) · Physical Review B · doi:10.1103/physrevb.82.115209 · Cited by 159
Svane, A., Christensen, N. E., Cardona, M., Chantis, A. N., van Schilfgaarde, M., & Kotani, T. (2010) · Physical Review B · doi:10.1103/physrevb.81.245120 · Cited by 155
Valence Bands in Lead Telluride
Allgaier, R. S. (1961) · Journal of Applied Physics · doi:10.1063/1.1777039 · Cited by 142
Lattice thermal conductivity of nanostructured thermoelectric materials based on PbTe
Koh, Y. K., Vineis, C. J., Calawa, S. D., Walsh, M., & Cahill, D. G. (2009) · Applied Physics Letters · doi:10.1063/1.3117228 · Cited by 116
Nimtz, G., & Schlicht, B. (1983) · Springer tracts in modern physics · doi:10.1007/bfb0044920 · Cited by 115
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Rationally Designing High-Performance Bulk Thermoelectric Materials
Tan, G., Zhao, L.-D., & Kanatzidis, M. G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00255 · Cited by 2,355
Band Engineering of Thermoelectric Materials
Pei, Y., Wang, H., & Snyder, G. J. (2012) · Advanced Materials · doi:10.1002/adma.201202919 · Cited by 1,793
Self-citationCompromise and Synergy in High‐Efficiency Thermoelectric Materials
Zhu, T., Liu, Y., Fu, C., Heremans, J. P., Snyder, J. G., & Zhao, X. (2017) · Advanced Materials · doi:10.1002/adma.201605884 · Cited by 1,616
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Metadata
- Authors
- Pei, Y., LaLonde, A. D., Heinz, N. A., & Snyder, G. J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2012-04-02
- Volume
- 2
- Issue
- 6
- Pages
- 670-675
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2057054708
- Cited by
- 289
- References
- 32
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.