The DOI matches its Crossref record.
Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD
Abstract
Nanolayers of Al 2 O 3 and TiO 2 coatings were applied to lithium‐ and manganese‐rich cathode powder Li 1.2 Ni 0.13 Mn 0.54 Co 0.13 O 2 using an atomic layer deposition (ALD) method. The ALD coatings exhibited different surface morphologies; the Al 2 O 3 surface film appeared to be uniform and conformal, while the TiO 2 layers appeared as particulates across the material surface. In a Li‐cell, the Al 2 O 3 surface film was stable during repeated charge and discharge, and this improved the cell cycling stability, despite a high surface impedance. The TiO 2 layer was found to be more reactive with Li and formed a LixTiO 2 interface, which led to a slight increase in cell capacity. However, the repetitive insertion/extraction process for the Li+ ions caused erosion of the surface protective TiO 2 film, which led to degradation in cell performance, particularly at high temperature. For cells comprised of the coated Li 1.2 Ni 0.13 Mn 0.54 Co 0.13 O 2 and an anode of meso‐carbon‐micro‐beads (MCMB), the cycling stability introduced by ALD was not enough to overcome the electrochemical instability of MCMB graphite. Therefore, protection of the cathode materials by ALD Al 2 O 3 or TiO 2 can address some of the capacity fading issues related to the Li‐rich cathode at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Zhang, Y., Katayama, Y., Tatara, R., Giordano, L., Yu, Y., Fraggedakis, D., Sun, J. G., Maglia, F., Jung, R., Bazant, M. Z., et al. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02543j · Cited by 452
Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials
Nisar, U., Muralidharan, N., Essehli, R., Amin, R., & Belharouak, I. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.03.015 · Cited by 428
Self-citationBuilding Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Li, B., Yan, H., Ma, J., Yu, P., Xia, D., Huang, W., Chu, W., & Wu, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400436 · Cited by 347
Metadata
- Authors
- Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2013-06-12
- Volume
- 3
- Issue
- 10
- Pages
- 1299-1307
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2133112107
- Cited by
- 495
- References
- 0
- FWCI
- 18.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD. https://app.cochat.ai/papers/10.1002/aenm.201300269
- The paper
- Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L. (2013). Structural and Electrochemical Study of Al2O3 and TiO2 Coated Li1.2Ni0.13Mn0.54Co0.13O2 Cathode Material Using ALD. Advanced Energy Materials. https://doi.org/10.1002/aenm.201300269
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.