The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Overcoming Efficiency Limitations of SnS‐Based Solar Cells
Abstract
Thin‐film solar cells are made by vapor deposition of Earth‐abundant materials: tin, zinc, oxygen and sulfur. These solar cells had previously achieved an efficiency of about 2%, less than 1/10 of their theoretical potential. Loss mechanisms are systematically investigated and mitigated in solar cells based on p‐type tin monosulfide, SnS, absorber layers combined with n‐type zinc oxysulfide, Zn(O,S) layers that selectively transmit electrons, but block holes. Recombination at grain boundaries is reduced by annealing the SnS films in H 2 S to form larger grains with fewer grain boundaries. Recombination near the p‐SnS/n‐Zn(O,S) junction is reduced by inserting a few monolayers of SnO 2 between these layers. Recombination at the junction is also reduced by adjusting the conduction band offset by tuning the composition of the Zn(O,S), and by reducing its free electron concentration with nitrogen doping. The resulting cells have an efficiency over 4.4%, which is more than twice as large as the highest efficiency obtained previously by solar cells using SnS absorber layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Band-structure, optical properties, and defect physics of the photovoltaic semiconductor SnS
Vidal, J., Lany, S., d’Avezac, M., Zunger, A., Zakutayev, A., Francis, J., & Tate, J. (2012) · Applied Physics Letters · doi:10.1063/1.3675880 · Cited by 477
Atomic Layer Deposition of Tin Monosulfide Thin Films
Sinsermsuksakul, P., Heo, J., Noh, W., Hock, A. S., & Gordon, R. G. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100330 · Cited by 442
Self-citation
Cited by
Bao, J., Zhang, X., Fan, B., Zhang, J., Zhou, M., Yang, W., Hu, X., Wang, H., Pan, B., & Xie, Y. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201502226 · Cited by 1,428
Chandrasekaran, S., Yao, L., Deng, L., Bowen, C., Zhang, Y., Chen, S., Lin, Z., Peng, F., & Zhang, P. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00664d · Cited by 1,199
Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries
Zhou, Y., Wang, L., Chen, S., Qin, S., Liu, X., Chen, J., Xue, D.-J., Luo, M., Cao, Y., Cheng, Y., et al. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.78 · Cited by 1,047
Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer
Wang, L., Li, D.-B., Li, K., Chen, C., Deng, H.-X., Gao, L., Zhao, Y., Jiang, F., Li, L., Huang, F., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.46 · Cited by 592
Vapor transport deposition of antimony selenide thin film solar cells with 7.6% efficiency
Wen, X., Chen, C., Lu, S., Li, K., Kondrotas, R., Zhao, Y., Chen, W., Gao, L., Wang, C., Zhang, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-04634-6 · Cited by 580
Metadata
- Authors
- Sinsermsuksakul, P., Sun, L., Lee, S. W., Park, H. H., Kim, S. B., Yang, C., & Gordon, R. G.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2014-06-20
- Volume
- 4
- Issue
- 15
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2095354333
- Cited by
- 621
- References
- 2
- FWCI
- 31.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.