The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%
Abstract
To realize high power conversion efficiencies (PCEs) in green‐solvent‐processed all‐polymer solar cells (All‐PSCs), a long alkyl chain modified perylene diimide (PDI)‐based polymer acceptor PPDIODT with superior solubility in nonhalogenated solvents is synthesized. A properly matched PBDT‐TS1 is selected as the polymer donor due to the red‐shifted light absorption and low‐lying energy level in order to achieve the complementary absorption spectrum and matched energy level between polymer donor and polymer acceptor. By utilizing anisole as the processing solvent, an optimal efficiency of 5.43% is realized in PBDT‐TS1/PPDIODT‐based All‐PSC with conventional configuration, which is comparable with that of All‐PSCs processed by the widely used binary solvent. Due to the utilization of an inverted device configuration, the PCE is further increased to over 6.5% efficiency. Notably, the best‐performing PCE of 6.58% is the highest value for All‐PSCs employing PDI‐based polymer acceptors and green‐solvent‐processed All‐PSCs. The excellent photovoltaic performance is mainly attributed to a favorable vertical phase distribution, a higher exciton dissociation efficiency (Pdiss) in the blend film, and a higher electrode carrier collection efficiency. Overall, the combination of rational molecular designing, material selection, and device engineering will motivate the efficiency breakthrough in green‐solvent‐processed All‐PSCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells
Jiang, W., Ye, L., Li, X., Xiao, C., Tan, F., Zhao, W., Hou, J., & Wang, Z. (2014) · Chem. Commun. · doi:10.1039/c3cc47204c · Cited by 307
Self-citation
Cited by
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
Zhao, W., Qian, D., Zhang, S., Li, S., Inganäs, O., Gao, F., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201600281 · Cited by 1,868
Self-citationLi, S., Ye, L., Zhao, W., Zhang, S., Mukherjee, S., Ade, H., & Hou, J. (2016) · Advanced Materials · doi:10.1002/adma.201602776 · Cited by 1,380
Self-citationA Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency
Zhao, W., Li, S., Zhang, S., Liu, X., & Hou, J. (2017) · Advanced Materials · doi:10.1002/adma.201604059 · Cited by 367
Self-citationZhang, S., Ye, L., & Hou, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502529 · Cited by 326
Self-citation
Metadata
- Authors
- Li, S., Zhang, H., Zhao, W., Ye, L., Yao, H., Yang, B., Zhang, S., & Hou, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-12-16
- Volume
- 6
- Issue
- 5
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2216824971
- Cited by
- 174
- References
- 1
- FWCI
- 16.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%. https://app.cochat.ai/papers/10.1002/aenm.201501991
- The paper
- Li, S., Zhang, H., Zhao, W., Ye, L., Yao, H., Yang, B., Zhang, S., & Hou, J. (2016). Green‐Solvent‐Processed All‐Polymer Solar Cells Containing a Perylene Diimide‐Based Acceptor with an Efficiency over 6.5%. Advanced Energy Materials. https://doi.org/10.1002/aenm.201501991
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.