The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
An Approach to Design Highly Durable Piezoelectric Nanogenerator Based on Self‐Poled PVDF/AlO‐rGO Flexible Nanocomposite with High Power Density and Energy Conversion Efficiency
Abstract
Till date, fabrication of piezoelectric nanogenerator (PNG) with highly durable, high power density, and high energy conversion efficiency is of great concern. Here a flexible, sensitive, cost effective hybrid piezoelectric nanogenerator (HPNG) developed by integrating flexible steel woven fabric electrodes into poly(vinylidene fluoride) (PVDF)/aluminum oxides decorated reduced graphene oxide (AlO‐rGO) nanocomposite film is reported where AlO‐rGO acts as nucleating agent for electroactive β‐phase formation. The HPNG exhibits reliable energy harvesting performance with high output, fast charging capability, and high durability compared with previously reported PVDF based PNGs. This HPNG is capable for harvesting energy from a variety and easy accessible biomechanical and mechanical energy sources such as, body movements (e.g., hand folding, jogging, heel pressing, and foot striking, etc.) and machine vibration. The HPNG exhibits high output power density and energy conversion efficiency, facilitating direct light on different color of several commercial light‐emitting diodes instantly and powers up many portable electronic devices like wrist watch, calculator, speaker, and mobile liquid crystal display (LCD) screen through capacitor charging. More importantly, HPNG retains its performance after long compression cycles (≈158 400), demonstrating great promise as a piezoelectric energy harvester toward practical applications in harvesting biomechanical and mechanical energy for self‐powered systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire Arrays
Wang, Z. L., & Song, J. (2006) · Science · doi:10.1126/science.1124005 · Cited by 7,922
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
Martins, P., Lopes, A. C., & Lanceros-Mendez, S. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.07.006 · Cited by 3,494
Lovinger, A. J. (1983) · Science · doi:10.1126/science.220.4602.1115 · Cited by 1,939
Direct-Write Piezoelectric Polymeric Nanogenerator with High Energy Conversion Efficiency
Chang, C., Tran, V. H., Wang, J., Fuh, Y.-K., & Lin, L. (2010) · Nano Letters · doi:10.1021/nl9040719 · Cited by 1,379
Piezoelectric BaTiO3Thin Film Nanogenerator on Plastic Substrates
Park, K.-I., Xu, S., Liu, Y., Hwang, G.-T., Kang, S.-J. L., Wang, Z. L., & Lee, K. J. (2010) · Nano Letters · doi:10.1021/nl102959k · Cited by 827
A Hybrid Piezoelectric Structure for Wearable Nanogenerators
Lee, M., Chen, C., Wang, S., Cha, S. N., Park, Y. J., Kim, J. M., Chou, L., & Wang, Z. L. (2012) · Advanced Materials · doi:10.1002/adma.201200150 · Cited by 619
Piezoelectric-nanowire-enabled power source for driving wireless microelectronics
Xu, S., Hansen, B. J., & Wang, Z. L. (2010) · Nature Communications · doi:10.1038/ncomms1098 · Cited by 546
Fan, X., Chen, J., Yang, J., Bai, P., Li, Z., & Wang, Z. L. (2015) · ACS Nano · doi:10.1021/acsnano.5b00618 · Cited by 538
Lead-Free NaNbO3 Nanowires for a High Output Piezoelectric Nanogenerator
Jung, J. H., Lee, M., Hong, J.-I., Ding, Y., Chen, C.-Y., Chou, L.-J., & Wang, Z. L. (2011) · ACS Nano · doi:10.1021/nn2039033 · Cited by 485
Hybrid Nanogenerator for Concurrently Harvesting Biomechanical and Biochemical Energy
Hansen, B. J., Liu, Y., Yang, R., & Wang, Z. L. (2010) · ACS Nano · doi:10.1021/nn100845b · Cited by 446
Energy harvesting based on semiconducting piezoelectric ZnO nanostructures
Kumar, B., & Kim, S.-W. (2012) · Nano Energy · doi:10.1016/j.nanoen.2012.02.001 · Cited by 436
Lee, J., Yoon, H., Kim, T. Y., Gupta, M. K., Lee, J. H., Seung, W., Ryu, H., & Kim, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500856 · Cited by 426
A Hyper‐Stretchable Elastic‐Composite Energy Harvester
Jeong, C. K., Lee, J., Han, S., Ryu, J., Hwang, G., Park, D. Y., Park, J. H., Lee, S. S., Byun, M., Ko, S. H., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500367 · Cited by 405
Karan, S. K., Mandal, D., & Khatua, B. B. (2015) · Nanoscale · doi:10.1039/c5nr02067k · Cited by 400
Self-citationMao, Y., Zhao, P., McConohy, G., Yang, H., Tong, Y., & Wang, X. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301624 · Cited by 400
Porous PVDF As Effective Sonic Wave Driven Nanogenerators
Cha, S., Kim, S. M., Kim, H., Ku, J., Sohn, J. I., Park, Y. J., Song, B. G., Jung, M. H., Lee, E. K., Choi, B. L., et al. (2011) · Nano Letters · doi:10.1021/nl202208n · Cited by 382
Highly durable all-fiber nanogenerator for mechanical energy harvesting
Zeng, W., Tao, X.-M., Chen, S., Shang, S., Chan, H. L. W., & Choy, S. H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41063c · Cited by 347
Zhao, Z., Pu, X., Du, C., Li, L., Jiang, C., Hu, W., & Wang, Z. L. (2016) · ACS Nano · doi:10.1021/acsnano.5b07157 · Cited by 326
Lin, L., Xie, Y., Niu, S., Wang, S., Yang, P.-K., & Wang, Z. L. (2015) · ACS Nano · doi:10.1021/nn506673x · Cited by 310
Lee, K. Y., Kim, D., Lee, J., Kim, T. Y., Gupta, M. K., & Kim, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201301379 · Cited by 303
Blow-driven triboelectric nanogenerator as an active alcohol breath analyzer
Wen, Z., Chen, J., Yeh, M.-H., Guo, H., Li, Z., Fan, X., Zhang, T., Zhu, L., & Wang, Z. L. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.06.006 · Cited by 299
Fang, J., Wang, X., & Lin, T. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11445j · Cited by 297
Flexible Pyroelectric Nanogenerators using a Composite Structure of Lead‐Free KNbO3 Nanowires
Yang, Y., Jung, J. H., Yun, B. K., Zhang, F., Pradel, K. C., Guo, W., & Wang, Z. L. (2012) · Advanced Materials · doi:10.1002/adma.201201414 · Cited by 288
Silk Nanofiber‐Networked Bio‐Triboelectric Generator: Silk Bio‐TEG
Kim, H., Kim, J., Jun, K., Kim, J., Seung, W., Kwon, O. H., Park, J., Kim, S., & Oh, I. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502329 · Cited by 284
Garain, S., Jana, S., Sinha, T. K., & Mandal, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11356 · Cited by 280
Alluri, N. R., Saravanakumar, B., & Kim, S.-J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01760 · Cited by 278
Process induced electroactive β-polymorph in PVDF: effect on dielectric and ferroelectric properties
Sharma, M., Madras, G., & Bose, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp01004c · Cited by 260
Whiter, R. A., Narayan, V., & Kar‐Narayan, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400519 · Cited by 208
Evaluation of reduced graphene oxide/ZnO effect on properties of PVDF nanocomposite films
Jaleh, B., & Jabbari, A. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.09.030 · Cited by 204
Single-electrode triboelectric nanogenerator for scavenging friction energy from rolling tires
Mao, Y., Geng, D., Liang, E., & Wang, X. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.026 · Cited by 196
Nature‐Replicated Nano‐in‐Micro Structures for Triboelectric Energy Harvesting
Seol, M., Woo, J., Lee, D., Im, H., Hur, J., & Choi, Y. (2014) · Small · doi:10.1002/smll.201400863 · Cited by 194
Jana, S., Garain, S., Sen, S., & Mandal, D. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp01820j · Cited by 189
Single‐InN‐Nanowire Nanogenerator with Upto 1 V Output Voltage
Huang, C., Song, J., Tsai, C., Lee, W., Lien, D., Gao, Z., Hao, Y., Chen, L., & Wang, Z. L. (2010) · Advanced Materials · doi:10.1002/adma.201000981 · Cited by 189
Tamang, A., Ghosh, S. K., Garain, S., Alam, M. M., Haeberle, J., Henkel, K., Schmeisser, D., & Mandal, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04161 · Cited by 186
Lee, T. I., Lee, S., Lee, E., Sohn, S., Lee, Y., Lee, S., Moon, G., Kim, D., Kim, Y. S., Myoung, J. M., et al. (2013) · Advanced Materials · doi:10.1002/adma.201300657 · Cited by 179
Alam, M. M., & Mandal, D. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b08168 · Cited by 178
Integration: An Effective Strategy to Develop Multifunctional Energy Storage Devices
Pan, S., Ren, J., Fang, X., & Peng, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501867 · Cited by 171
Energy Harvesting Technologies for Tire Pressure Monitoring Systems
Bowen, C. R., & Arafa, M. H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401787 · Cited by 161
Alam, M. M., Ghosh, S. K., Sultana, A., & Mandal, D. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/16/165403 · Cited by 150
Garain, S., Sinha, T. K., Adhikary, P., Henkel, K., Sen, S., Ram, S., Sinha, C., Schmeißer, D., & Mandal, D. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am507522r · Cited by 148
Alamusi, Xue, J., Wu, L., Hu, N., Qiu, J., Chang, C., Atobe, S., Fukunaga, H., Watanabe, T., Liu, Y., et al. (2012) · Nanoscale · doi:10.1039/c2nr32185h · Cited by 141
Kanık, M., Aktaş, O., Şen, H. Ş., Durgun, E., & Bayındır, M. (2014) · ACS Nano · doi:10.1021/nn503269b · Cited by 136
Huang, L., Lü, C., Wang, F., & Wang, L. (2014) · RSC Advances · doi:10.1039/c4ra07379g · Cited by 130
Self-Powered pH Sensor Based on a Flexible Organic–Inorganic Hybrid Composite Nanogenerator
Saravanakumar, B., Soyoon, S., & Kim, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5031648 · Cited by 128
Lei, T., Cai, X., Wang, X., Yu, L., Hu, X., Zheng, G., Lv, W., Wang, L., Wu, D., Sun, D., et al. (2013) · RSC Advances · doi:10.1039/c3ra42622j · Cited by 113
Sultana, A., Alam, M. M., Garain, S., Sinha, T. K., Middya, T. R., & Mandal, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04669 · Cited by 111
High output nanogenerator based on assembly of GaN nanowires
Lin, L., Lai, C.-H., Hu, Y., Zhang, Y., Wang, X., Xu, C. G., Snyder, R. L., Chen, L.-J., & Wang, Z. L. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/47/475401 · Cited by 88
Hong, C.-C., Huang, S.-Y., Shieh, J., & Chen, S.-H. (2012) · Macromolecules · doi:10.1021/ma202481t · Cited by 82
A Low‐Frequency Energy Harvester from Ultralong, Vertically Aligned BaTiO3 Nanowire Arrays
Koka, A., & Sodano, H. A. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301660 · Cited by 78
Piezoelectric properties of graphene oxide: A first-principles computational study
Chang, Z., Yan, W., Shang, J., & Liu, J. Z. (2014) · Applied Physics Letters · doi:10.1063/1.4890385 · Cited by 68
Multiferroic PVDF–Fe 3 O 4 hybrid films with reduced graphene oxide and ZnO nanofillers
Abdelhamid, E. H., Jayakumar, O. D., Kotari, V., Mandal, B. P., Rao, R., Naik, V. M., Naik, R., & Tyagi, A. K. (2016) · RSC Advances · doi:10.1039/c5ra26983k · Cited by 67
Piezoelectric nanogenerators synthesized using KNbO 3 nanowires with various crystal structures
Joung, M., Xu, H., Seo, I., Kim, D., Hur, J., Nahm, S., Kang, C., Yoon, S.-J., & Park, H.-M. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03551h · Cited by 51
Cited by
Flexible PVDF based piezoelectric nanogenerators
Lu, L., Ding, W., Liu, J., & Yang, B. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105251 · Cited by 812
Lee, Y., Park, J., Cho, S., Shin, Y.-E., Lee, H., Kim, J., Myoung, J., Cho, S., Kang, S., Baig, C., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b01805 · Cited by 528
Narita, F., & Fox, M. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700743 · Cited by 527
Shi, K., Sun, B., Huang, X., & Jiang, P. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.053 · Cited by 517
Costa, C. M., Cardoso, V. F., Martins, P., Correia, D. M., Gonçalves, R., Costa, P., Correia, V., Ribeiro, C., Fernandes, M. M., Martins, P. M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00196 · Cited by 498
Metadata
- Authors
- Karan, S. K., Bera, R., Paria, S., Das, A. K., Maiti, S., Maitra, A., & Khatua, B. B.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2016-07-19
- Volume
- 6
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2493080491
- Cited by
- 447
- References
- 52
- FWCI
- 13.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.