The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Recent Advances of Mn‐Rich LiFe1‐yMnyPO4 (0.5 ≤ y < 1.0) Cathode Materials for High Energy Density Lithium Ion Batteries
Abstract
LiMnPO 4 (LMP) is one of the most potential candidates for high energy density (≈700 W h kg−1) lithium ion batteries (LIBs). However, the intrinsically low electronic conductivity and lithium ion diffusion coefficient of LMP result in its low performance. To overcome these challenges, it is an effective approach to prepare nanometer‐sized Fe‐doping LMP (LFMP) materials through optimization of the preparation routes. Moreover, surface coating can improve the ionic and electronic conductivity, and decrease the interfacial side reactions between the nanometer particles and electrolyte. Thus, a uniform surface coating will lead to a significant enhancement of the electrochemical performance of LFMP. Currently, considerable efforts have been devoted to improving the electrochemical performance of LiFe 1‐yMnyPO 4 (0.5 ≤ y < 1.0) and some important progresses have been achieved. Here, a general overview of the structural features, typical electrochemical behavior, delithiation/lithiation mechanisms, and thermodynamic properties of LiFe 1‐yMnyPO 4‐based materials is presented. The recent developments achieved in improvement of the electrochemical performances of LiFe 1‐yMnyPO 4‐based materials are summarized, including selecting the synthetic methods, nanostructuring, surface coating, optimizing Fe/Mn ratios and particle morphologies, cation/anion doping, and rational designing of LFMP‐based full cells. Finally, the critical issues at present and future development of LiFe 1‐yMnyPO 4‐based materials are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
“Water-in-salt” electrolyte enables high-voltage aqueous lithium-ion chemistries
Suo, L., Borodin, O., Gao, T., Olguin, M., Ho, J., Fan, X., Luo, C., Wang, C., & Xu, K. (2015) · Science · doi:10.1126/science.aab1595 · Cited by 3,821
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Cited by
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Fundamentals, status and challenges of direct recycling technologies for lithium ion batteries
Ji, H., Wang, J., Ma, J., Cheng, H.-M., & Zhou, G. (2023) · Chemical Society Reviews · doi:10.1039/d3cs00254c · Cited by 385
Metadata
- Authors
- Deng, Y., Yang, C., Zou, K., Qin, X., Zhao, Z., & Chen, G.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-02-20
- Volume
- 7
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2590306494
- Cited by
- 201
- References
- 3
- FWCI
- 5.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.