The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Grain Boundary Engineering for Achieving High Thermoelectric Performance in n‐Type Skutterudites
Open accessAbstract
Grain or phase boundaries play a critical role in the carrier and phonon transport in bulk thermoelectric materials. Previous investigations about controlling boundaries primarily focused on the reducing grain size or forming nanoinclusions. Herein, liquid phase compaction method is first used to fabricate the Yb‐filled CoSb 3 with excess Sb content, which shows the typical feature of low‐angle grain boundaries with dense dislocation arrays. Seebeck coefficients show a dramatic increase via energy filtering effect through dislocation arrays with little deterioration on the carrier mobility, which significantly enhances the power factor over a broad temperature range with a high room‐temperature value around 47 μW cm−2 K−1. Simultaneously, the lattice thermal conductivity could be further suppressed via scattering phonons via dense dislocation scattering. As a result, the highest average figure of merit ZT of ≈1.08 from 300 to 850 K could be realized, comparable to the best reported result of single or triple‐filled Skutterudites. This work clearly points out that low‐angle grain boundaries fabricated by liquid phase compaction method could concurrently optimize the electrical and thermal transport properties leading to an obvious enhancement of both power factor and ZT.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Complex thermoelectric materials
Snyder, G. J., & Toberer, E. S. (2008) · Nature Materials · doi:10.1038/nmat2090 · Cited by 11,455
Electronic Processes in Non-Crystalline Materials
Mott, N. F., Davis, E. A., & Lösche, A. (1972) · Kristall und Technik Band 7, Heft 4 · doi:10.1515/9783112653326-018 · Cited by 9,295
CRC Handbook of Thermoelectrics
(2018) · CRC Press eBooks · doi:10.1201/9781420049718 · Cited by 5,787
High-Thermoelectric Performance of Nanostructured Bismuth Antimony Telluride Bulk Alloys
Poudel, B., Hao, Q., Ma, Y., Lan, Y., Minnich, A., Yu, B., Yan, X., Wang, D., Muto, A., Vashaee, D., et al. (2008) · Science · doi:10.1126/science.1156446 · Cited by 5,606
Self-citationAlternative energy technologies
Dresselhaus, M. S., & Thomas, I. L. (2001) · Nature · doi:10.1038/35104599 · Cited by 4,894
Model for Lattice Thermal Conductivity at Low Temperatures
Callaway, J. (1959) · Physical Review · doi:10.1103/physrev.113.1046 · Cited by 3,218
Cubic AgPb m SbTe 2+ m : Bulk Thermoelectric Materials with High Figure of Merit
Hsu, K. F., Loo, S., Guo, F., Chen, W., Dyck, J. S., Uher, C., Hogan, T., Polychroniadis, E. K., & Kanatzidis, M. G. (2004) · Science · doi:10.1126/science.1092963 · Cited by 2,927
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
Kim, S. I., Lee, K. H., Mun, H. A., Kim, H. S., Hwang, S. W., Roh, J. W., Yang, D. J., Shin, W. H., Li, X. S., Lee, Y. H., et al. (2015) · Science · doi:10.1126/science.aaa4166 · Cited by 2,084
Filled Skutterudite Antimonides: A New Class of Thermoelectric Materials
Sales, B. C., Mandrus, D., & Williams, R. K. (1996) · Science · doi:10.1126/science.272.5266.1325 · Cited by 2,073
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
High Performance Thermoelectric Materials: Progress and Their Applications
Yang, L., Chen, Z., Dargusch, M. S., & Zou, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701797 · Cited by 958
Mao, J., Liu, Z., Zhou, J., Zhu, H., Zhang, Q., Chen, G., & Ren, Z. (2018) · Advances in Physics · doi:10.1080/00018732.2018.1551715 · Cited by 592
Self-citationDefect engineering in thermoelectric materials: what have we learned?
Zheng, Y., Slade, T. J., Hu, L., Tan, X. Y., Luo, Y., Luo, Z.-Z., Xu, J., Yan, Q., & Kanatzidis, M. G. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00347j · Cited by 482
Tuning the carrier scattering mechanism to effectively improve the thermoelectric properties
Shuai, J., Mao, J., Song, S., Zhu, Q., Sun, J., Wang, Y., He, R., Zhou, J., Chen, G., Singh, D. J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00098g · Cited by 452
Self-citation
Metadata
- Authors
- Meng, X., Liu, Z., Cui, B., Qin, D., Geng, H., Cai, W., Fu, L., He, J., Ren, Z., & Sui, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-02-17
- Volume
- 7
- Issue
- 13
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2588412081
- Cited by
- 259
- References
- 31
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Grain Boundary Engineering for Achieving High Thermoelectric Performance in n‐Type Skutterudites. https://app.cochat.ai/papers/10.1002/aenm.201602582
- The paper
- Meng, X., Liu, Z., Cui, B., Qin, D., Geng, H., Cai, W., Fu, L., He, J., Ren, Z., & Sui, J. (2017). Grain Boundary Engineering for Achieving High Thermoelectric Performance in n‐Type Skutterudites. Advanced Energy Materials. https://doi.org/10.1002/aenm.201602582
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.