The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Anion Doping: A New Strategy for Developing High‐Performance Perovskite‐Type Cathode Materials of Solid Oxide Fuel Cells
Abstract
Overcoming the sluggish activity of cathode materials is critical to realizing the wide‐spread application of intermediate‐temperature solid oxide fuel cells. Herein, a new way is reported to tune the performance of perovskite‐type materials as oxygen reduction electrodes by embedding anions (F−) in oxygen sites. The obtained perovskite oxyfluorides SrFeO 3−σ−δFσ and SrFe 0.9 Ti 0.1 O 3−σ−δFσ (σ = 0.05 and 0.10) show improved electrocatalytic activity compared to their parent oxides, achieving area specific resistance values of 0.875, 0.393, and 0.491 Ω cm 2 for SrFeO 3−δ, SrFeO 2.95−δF 0.05, and SrFeO 2.90−δF 0.10, respectively, at 600 °C in air. Such improved performance is a result of the improved bulk diffusion and surface exchange properties due to anion doping. Moreover, favorable stability in performance is also demonstrated for the F− anion‐doped perovskites as oxygen reduction electrodes at 650 °C for a test period of ≈200 h. A combination of anion doping and cation doping may provide a highly attractive strategy for the future development of cathode materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
A high-performance cathode for the next generation of solid-oxide fuel cells
Shao, Z., & Haile, S. M. (2004) · Nature · doi:10.1038/nature02863 · Cited by 3,158
Self-citationLowering the Temperature of Solid Oxide Fuel Cells
Wachsman, E. D., & Lee, K. T. (2011) · Science · doi:10.1126/science.1204090 · Cited by 2,554
Factors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Advanced anodes for high-temperature fuel cells
Atkinson, A., Barnett, S., Gorte, R. J., Irvine, J. T. S., McEvoy, A. J., Mogensen, M., Singhal, S. C., & Vohs, J. (2004) · Nature Materials · doi:10.1038/nmat1040 · Cited by 1,427
Enhancing SOFC cathode performance by surface modification through infiltration
Ding, D., Li, X., Lai, S. Y., Gerdes, K., & Liu, M. (2014) · Energy & Environmental Science · doi:10.1039/c3ee42926a · Cited by 882
A Perovskite Electrocatalyst for Efficient Hydrogen Evolution Reaction
Xu, X., Chen, Y., Zhou, W., Zhu, Z., Su, C., Liu, M., & Shao, Z. (2016) · Advanced Materials · doi:10.1002/adma.201600005 · Cited by 570
Self-citationProgress in Solid Oxide Fuel Cells with Nickel-Based Anodes Operating on Methane and Related Fuels
Wang, W., Su, C., Wu, Y., Ran, R., & Shao, Z. (2013) · Chemical Reviews · doi:10.1021/cr300491e · Cited by 510
Self-citationAdvanced synthesis of materials for intermediate-temperature solid oxide fuel cells
Shao, Z., Zhou, W., & Zhu, Z. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.002 · Cited by 455
Self-citationSynthesis of hierarchical nanoporous F-doped TiO2 spheres with visible light photocatalytic activity
Ho, W., Yu, J. C., & Lee, S. (2006) · Chemical Communications · doi:10.1039/b515513d · Cited by 380
Recent Progress in the Development of Anode Materials for Solid Oxide Fuel Cells
Cowin, P. I., Petit, C. T. G., Lan, R., Irvine, J. T. S., & Tao, S. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100108 · Cited by 379
Choi, S., Yoo, S., Kim, J., Park, S., Jun, A., Sengodan, S., Kim, J., Shin, J., Jeong, H. Y., Choi, Y., et al. (2013) · Scientific Reports · doi:10.1038/srep02426 · Cited by 374
A Novel Composite Cathode for Low‐Temperature SOFCs Based on Oxide Proton Conductors
Yang, L., Zuo, C., Wang, S., Cheng, Z., & Liu, M. (2008) · Advanced Materials · doi:10.1002/adma.200702762 · Cited by 356
Role of solid oxidefuel cells in a balanced energy strategy
Wachsman, E. D., Marlowe, C. A., & Lee, K. T. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02445k · Cited by 307
Chen, Y., Zhou, W., Ding, D., Liu, M., Ciucci, F., Tade, M., & Shao, Z. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500537 · Cited by 305
Self-citationSulfur‐Tolerant Redox‐Reversible Anode Material for Direct Hydrocarbon Solid Oxide Fuel Cells
Yang, C., Yang, Z., Jin, C., Xiao, G., Chen, F., & Han, M. (2012) · Advanced Materials · doi:10.1002/adma.201104852 · Cited by 297
Yoo, S., Jun, A., Ju, Y., Odkhuu, D., Hyodo, J., Jeong, H. Y., Park, N., Shin, J., Ishihara, T., & Kim, G. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201407006 · Cited by 205
Zhu, J., Liu, G., Liu, Z., Chu, Z., Jin, W., & Xu, N. (2016) · Advanced Materials · doi:10.1002/adma.201505959 · Cited by 177
A Highly Active Perovskite Electrode for the Oxygen Reduction Reaction Below 600 °C
Zhou, W., Sunarso, J., Zhao, M., Liang, F., Klande, T., & Feldhoff, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201307305 · Cited by 166
Self-citationMoholkar, A. V., Pawar, S. M., Rajpure, K. Y., Bhosale, C. H., & Kim, J. H. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.07.035 · Cited by 155
Su, C., Wang, W., Chen, Y., Yang, G., Xu, X., Tadé, M. O., & Shao, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02810 · Cited by 144
Self-citationDai, H., Ng, C. F., & Au, C. (2000) · Journal of Catalysis · doi:10.1006/jcat.1999.2677 · Cited by 138
Dong, F., Chen, Y., Chen, D., & Shao, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502240m · Cited by 119
Self-citationChang, I., Ji, S., Park, J., Lee, M. H., & Won, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402251 · Cited by 116
Advanced Symmetric Solid Oxide Fuel Cell with an Infiltrated K 2 NiF 4 -Type La 2 NiO 4 Electrode
Yang, G., Su, C., Ran, R., Tadé, M. O., & Shao, Z. (2013) · Energy & Fuels · doi:10.1021/ef401473w · Cited by 99
Self-citationSynthesis and characterisation of the SrxBa1−xFeO3−y-system and the fluorinated phases SrxBa1−xFeO2F
Clemens, O., Haberkorn, R., Slater, P. R., & Beck, H. P. (2010) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2010.06.002 · Cited by 55
Quasi-specific access of the potassium channel inactivation gate
Venkataraman, G., Srikumar, D., & Holmgren, M. (2014) · Nature Communications · doi:10.1038/ncomms5050 · Cited by 12
Yang, G., Su, C., Wang, W., Ran, R., Tadé, M. O., & Shao, Z. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.091 · Cited by 11
Self-citation
Cited by
Recent Advances in Perovskite‐Type Oxides for Energy Conversion and Storage Applications
Sun, C., Alonso, J. A., & Bian, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000459 · Cited by 634
Xu, X., Wang, W., Zhou, W., & Shao, Z. (2018) · Small Methods · doi:10.1002/smtd.201800071 · Cited by 407
Self-citationDesigning High‐Valence Metal Sites for Electrochemical Water Splitting
Sun, H., Xu, X., Song, Y., Zhou, W., & Shao, Z. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009779 · Cited by 403
Self-citationRecent Advances in Non‐Noble Bifunctional Oxygen Electrocatalysts toward Large‐Scale Production
Zeng, K., Zheng, X., Li, C., Yan, J., Tian, J., Jin, C., Strasser, P., & Yang, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000503 · Cited by 365
Triple ionic–electronic conducting oxides for next-generation electrochemical devices
Papac, M., Stevanović, V., Zakutayev, A., & O’Hayre, R. (2021) · Nature Materials · doi:10.1038/s41563-020-00854-8 · Cited by 349
Metadata
- Authors
- Zhang, Z., Zhu, Y., Zhong, Y., Zhou, W., & Shao, Z.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-05-16
- Volume
- 7
- Issue
- 17
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2615093193
- Cited by
- 305
- References
- 28
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.