The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Highly Durable Platinum Single‐Atom Alloy Catalyst for Electrochemical Reactions
Abstract
Single atomic Pt catalyst can offer efficient utilization of the expensive platinum and provide unique selectivity because it lacks ensemble sites. However, designing such a catalyst with high Pt loading and good durability is very challenging. Here, single atomic Pt catalyst supported on antimony‐doped tin oxide (Pt1/ATO) is synthesized by conventional incipient wetness impregnation, with up to 8 wt% Pt. The single atomic Pt structure is confirmed by high‐angle annular dark field scanning tunneling electron microscopy images and extended X‐ray absorption fine structure analysis results. Density functional theory calculations show that replacing Sb sites with Pt atoms in the bulk phase or at the surface of SbSn or ATO is energetically favorable. The Pt1/ATO shows superior activity and durability for formic acid oxidation reaction, compared to a commercial Pt/C catalyst. The single atomic Pt structure is retained even after a harsh durability test, which is performed by repeating cyclic voltammetry in the range of 0.05–1.4 V for 1800 cycles. A full cell is fabricated for direct formic acid fuel cell using the Pt1/ATO as an anode catalyst, and an order of magnitude higher cell power is obtained compared to the Pt/C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalysis by Supported Single Metal Atoms
Liu, J. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b01534 · Cited by 1,331
Tuning selectivity of electrochemical reactions by atomically dispersed platinum catalyst
Choi, C. H., Kim, M., Kwon, H. C., Cho, S. J., Yun, S., Kim, H.-T., Mayrhofer, K. J. J., Kim, H., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms10922 · Cited by 849
Cited by
Chemical Synthesis of Single Atomic Site Catalysts
Ji, S., Chen, Y., Wang, X., Zhang, Z., Wang, D., & Li, Y. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00818 · Cited by 1,444
Single-Atom Catalysts across the Periodic Table
Kaiser, S. K., Chen, Z., Faust Akl, D., Mitchell, S., & Pérez-Ramírez, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00576 · Cited by 1,367
Atomic site electrocatalysts for water splitting, oxygen reduction and selective oxidation
Zhao, D., Zhuang, Z., Cao, X., Zhang, C., Peng, Q., Chen, C., & Li, Y. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00869a · Cited by 860
Metal-Organic-Framework-Based Single-Atom Catalysts for Energy Applications
Jiao, L., & Jiang, H.-L. (2019) · Chem · doi:10.1016/j.chempr.2018.12.011 · Cited by 779
Single‐Atom Catalysts for Electrocatalytic Applications
Zhang, Q., & Guan, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000768 · Cited by 741
Metadata
- Authors
- Kim, J., Roh, C., Sahoo, S. K., Yang, S., Bae, J., Han, J. W., & Lee, H.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-09-11
- Volume
- 8
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2751373693
- Cited by
- 207
- References
- 2
- FWCI
- 5.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.