The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
High‐Performance Planar Perovskite Solar Cells Using Low Temperature, Solution–Combustion‐Based Nickel Oxide Hole Transporting Layer with Efficiency Exceeding 20%
Abstract
NiOx hole transporting layer has been extensively studied in optoelectronic devices. In this paper, the low temperature, solution–combustion‐based method is employed to prepare the NiOx hole transporting layer. The resulting NiOx thin films show better quality and preferable energy alignment with perovskite thin film compared to high temperature sol–gel‐processed NiOx. With this, high‐performance perovskite solar cells are fabricated successfully with power conversion efficiency exceeding 20% using a modified two‐step prepared MA 1−yFAyPbI 3−xClx perovskite. This efficiency value is among the highest values for NiOx‐based devices. Various characterizations and analyses provide evidence of better film quality, enhanced charge transport and extraction, and suppressed charge recombination. Meanwhile, the device exhibits much better device stability compared to sol–gel‐processed NiOx and poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)‐based devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Yuan, Y., & Huang, J. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00420 · Cited by 1,865
Kim, M.-G., Kanatzidis, M. G., Facchetti, A., & Marks, T. J. (2011) · Nature Materials · doi:10.1038/nmat3011 · Cited by 1,212
Banger, K. K., Yamashita, Y., Mori, K., Peterson, R. L., Leedham, T., Rickard, J., & Sirringhaus, H. (2011) · Nature Materials · doi:10.1038/nmat2914 · Cited by 1,054
Jeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Self-citationZhang, H., Cheng, J., Lin, F., He, H., Mao, J., Wong, K. S., Jen, A. K.-Y., & Choy, W. C. H. (2016) · ACS Nano · doi:10.1021/acsnano.5b07043 · Cited by 560
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Highly Efficient Flexible Perovskite Solar Cells Using Solution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Que, M., Xing, Y., Que, W., Niu, C., & Shao, J. (2016) · ACS Nano · doi:10.1021/acsnano.5b08135 · Cited by 476
Yu, Z., & Sun, L. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500213 · Cited by 462
Jung, J. W., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201503298 · Cited by 458
Zhu, Z., Bai, Y., Zhang, T., Liu, Z., Long, X., Wei, Z., Wang, Z., Zhang, L., Wang, J., Yan, F., et al. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405176 · Cited by 457
Self-citationSeo, S., Park, I. J., Kim, M., Lee, S., Bae, C., Jung, H. S., Park, N.-G., Kim, J. Y., & Shin, H. (2016) · Nanoscale · doi:10.1039/c6nr01601d · Cited by 380
Highly Efficient Flexible Perovskite Solar Cells UsingSolution-Derived NiOx Hole Contacts
Yin, X., Chen, P., Meidan, Q., Yonglei, X., Que, W., Chunming, N., & Shao, J. (2016) · INDIGO (University of Illinois at Chicago) · doi:10.1021/acsnano.5b08135.s001 · Cited by 340
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Zhao, X., Kim, H.-S., Seo, J.-Y., & Park, N.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b15673 · Cited by 265
Xue, Q., Bai, Y., Liu, M., Xia, R., Hu, Z., Chen, Z., Jiang, X., Huang, F., Yang, S., Matsuo, Y., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602333 · Cited by 243
Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells
Liu, Z., Zhu, A., Cai, F., Tao, L., Zhou, Y., Zhao, Z., Chen, Q., Cheng, Y.-B., & Zhou, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01593c · Cited by 228
Self-citationChang, J., Lin, Z., Zhu, H., Isikgor, F. H., Xu, Q.-H., Zhang, C., Hao, Y., & Ouyang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06851k · Cited by 159
Self-citationChang, J., Zhu, H., Li, B., Isikgor, F. H., Hao, Y., Xu, Q., & Ouyang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08398b · Cited by 154
Self-citationHigh Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact
Yin, X., Yao, Z., Luo, Q. G., Dai, X., Zhou, Y., Zhang, Y., Zhou, Y., Luo, S., Li, J., Wang, N., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13372 · Cited by 150
Xi, H., Tang, S., Ma, X., et al. (2017) · ACS Omega · doi:10.1021/acsomega.6b00465 · Cited by 85
New Hybrid Hole Extraction Layer of Perovskite Solar Cells with a Planar p–i–n Geometry
Park, I. J., Park, M. A., Kim, D. H., Park, G. D., Kim, B. J., Son, H. J., Ko, M. J., Lee, D., Park, T., Shin, H., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b09322 · Cited by 75
Cited by
Kumar, P., Vahidzadeh, E., Thakur, U. K., Kar, P., Alam, K. M., Goswami, A., Mahdi, N., Cui, K., Bernard, G. M., Michaelis, V. K., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00144 · Cited by 841
Defect and Contact Passivation for Perovskite Solar Cells
Aydin, E., De Bastiani, M., & De Wolf, S. (2019) · Advanced Materials · doi:10.1002/adma.201900428 · Cited by 681
Advances in the Application of Perovskite Materials
Zhang, L., Mei, L., Wang, K., Lv, Y., Zhang, S., Lian, Y., Liu, X., Ma, Z., Xiao, G., Liu, Q., et al. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01140-3 · Cited by 460
Yin, X., Song, Z., Li, Z., & Tang, W. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02337j · Cited by 388
New Strategies for Defect Passivation in High‐Efficiency Perovskite Solar Cells
Akin, S., Arora, N., Zakeeruddin, S. M., Grätzel, M., Friend, R. H., & Dar, M. I. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903090 · Cited by 352
Metadata
- Authors
- Liu, Z., Chang, J., Lin, Z., Zhou, L., Yang, Z., Chen, D., Zhang, C., Liu, S. (., & Hao, Y.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-03-30
- Volume
- 8
- Issue
- 19
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2795022564
- Cited by
- 324
- References
- 28
- FWCI
- 18.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.