The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
N‐Doped Graphene Modified 3D Porous Cu Current Collector toward Microscale Homogeneous Li Deposition for Li Metal Anodes
Abstract
Lithium metal is the most promising anode material for high‐energy‐density batteries due to its high specific capacity of 3860 mAh g−1 and low reduction potential of −3.04 V versus standard hydrogen electrode. However, huge volume change, safety concerns, and low efficiency impede the practical applications of Li metal anodes. Herein, it is shown that the nitrogen‐doped graphene modified 3D porous Cu (3DCu@NG) current collector can mitigate the above problems. The N‐doped graphene, coating on the surface of 3D current collector, not only contributes to a uniform Li+ flux, but also leads to a scattered distribution of electrons throughout the surface, finally contributing to a uniform Li deposition and the improved electrochemical performance. In addition, the continuously porous structure of 3DCu@NG provides a space for the metallic Li deposition and could effectually accommodate the volume expansion during cycling. As a result, the Li‐3DCu@NG anode exhibits a high areal capacity of 4 mAh cm−2, a high Li utilization of ≈98%, and an ultralow voltage hysteresis of ≈19 mV. The multifunctional N‐doped graphene modified 3D porous current collector promisingly provides a strategy for safe and high‐energy lithium metal anodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Cited by
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Cheng, X.-B., Zhao, C.-Z., Yao, Y.-X., Liu, H., & Zhang, Q. (2019) · Chem · doi:10.1016/j.chempr.2018.12.002 · Cited by 874
Jiang, M., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202103005 · Cited by 720
A Review of Solid Electrolyte Interphase (SEI) and Dendrite Formation in Lithium Batteries
Li, B., Chao, Y., Li, M., Xiao, Y., Li, R., Yang, K., Cui, X., Xu, G., Li, L., Yang, C., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-022-00147-5 · Cited by 406
Recent advances in developing organic electrode materials for multivalent rechargeable batteries
Qin, K., Huang, J., Holguin, K., & Luo, C. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02111c · Cited by 256
Self-citation
Metadata
- Authors
- Zhang, R., Wen, S., Wang, N., Qin, K., Liu, E., Shi, C., & Zhao, N.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-05-28
- Volume
- 8
- Issue
- 23
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2806528178
- Cited by
- 216
- References
- 1
- FWCI
- 9.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: N‐Doped Graphene Modified 3D Porous Cu Current Collector toward Microscale Homogeneous Li Deposition for Li Metal Anodes. https://app.cochat.ai/papers/10.1002/aenm.201800914
- The paper
- Zhang, R., Wen, S., Wang, N., Qin, K., Liu, E., Shi, C., & Zhao, N. (2018). N‐Doped Graphene Modified 3D Porous Cu Current Collector toward Microscale Homogeneous Li Deposition for Li Metal Anodes. Advanced Energy Materials. https://doi.org/10.1002/aenm.201800914
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.