The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries
Abstract
Rechargeable lithium–sulfur batteries have attracted tremendous scientific attention owing to their superior energy density. However, the sulfur electrochemistry involves multielectron redox reactions and complicated phase transformations, while the final morphology of solid‐phase Li 2 S precipitates largely dominate the battery's performance. Herein, a triple‐phase interface among electrolyte/CoSe 2/G is proposed to afford strong chemisorption, high electrical conductivity, and superb electrocatalysis of polysulfide redox reactions in a working lithium–sulfur battery. The triple‐phase interface effectively enhances the kinetic behaviors of soluble lithium polysulfides and regulates the uniform nucleation and controllable growth of solid Li 2 S precipitates at large current density. Therefore, the cell with the CoSe 2/G functional separator delivers an ultrahigh rate cycle at 6.0 C with an initial capacity of 916 mAh g−1 and a capacity retention of 459 mAh g−1 after 500 cycles, and a stable operation of high sulfur loading electrode (2.69–4.35 mg cm−2). This work opens up a new insight into the energy chemistry at interfaces to rationally regulate the electrochemical redox reactions, and also inspires the exploration of related energy storage and conversion systems based on multielectron redox reactions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
First-row transition metal dichalcogenide catalysts for hydrogen evolution reaction
Kong, D., Cha, J. J., Wang, H., Lee, H. R., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42413h · Cited by 1,031
Cited by
Zhao, C., Xu, G.-L., Yu, Z., Zhang, L., Hwang, I., Mo, Y.-X., Ren, Y., Cheng, L., Sun, C.-J., Ren, Y., et al. (2021) · Nature Nanotechnology · doi:10.1038/s41565-020-00797-w · Cited by 650
Ye, Z., Jiang, Y., Li, L., Wu, F., & Chen, R. (2020) · Advanced Materials · doi:10.1002/adma.202002168 · Cited by 394
Interface engineering toward stable lithium–sulfur batteries
Guo, Y., Niu, Q., Pei, F., Wang, Q., Zhang, Y., Du, L., Zhang, Y., Zhang, Y., Zhang, Y., Fan, L., et al. (2024) · Energy & Environmental Science · doi:10.1039/d3ee04183b · Cited by 322
Self-citationWang, M., Fan, L., Sun, X., Guan, B., Jiang, B., Wu, X., Tian, D., Sun, K., Qiu, Y., Yin, X., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01564 · Cited by 312
Ding, Q., Wang, H., Zhou, Z., Wu, Z., Tao, K., Gui, X., Liu, C., Shi, W., & Wu, J. (2023) · SmartMat · doi:10.1002/smm2.1147 · Cited by 107
Metadata
- Authors
- Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2018-10-30
- Volume
- 9
- Issue
- 1
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2899242859
- Cited by
- 626
- References
- 1
- FWCI
- 29.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries. https://app.cochat.ai/papers/10.1002/aenm.201802768
- The paper
- Yuan, H., Peng, H., Li, B., Xie, J., Kong, L., Zhao, M., Chen, X., Huang, J., & Zhang, Q. (2019). Conductive and Catalytic Triple‐Phase Interfaces Enabling Uniform Nucleation in High‐Rate Lithium–Sulfur Batteries. Advanced Energy Materials. https://doi.org/10.1002/aenm.201802768
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.