The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Controllable Chain‐Length for Covalent Sulfur–Carbon Materials Enabling Stable and High‐Capacity Sodium Storage
Abstract
Room temperature sodium–sulfur batteries have emerged as promising candidate for application in energy storage. However, the electrodes are usually obtained through infusing elemental sulfur into various carbon sources, and the precipitation of insoluble and irreversible sulfide species on the surface of carbon and sodium readily leads to continuous capacity degradation. Here, a novel strategy is demonstrated to prepare a covalent sulfur–carbon complex (SC‐BDSA) with high covalent‐sulfur concentration (40.1%) that relies on SO 3 H (Benzenedisulfonic acid, BDSA) and SO 42− as the sulfur source rather than elemental sulfur. Most of the sulfur is exists in the form of OS/CS bridge‐bonds (short/long‐chain) whose features ensure sufficient interfacial contact and maintain high ionic/electronic conductivities of the sulfur–carbon cathode. Meanwhile, the carbon mesopores resulting from the thermal‐treated salt bath can confine a certain amount of sulfur and localize the diffluent polysulfides. Furthermore, the CSxC bridges can be electrochemically broken at lower potential (<0.6 V vs Na/Na+) and then function as a capacity sponsor. And the R‐SO units can anchor the initially generated Sx2− to form insoluble surface‐bound intermediates. Thus SC‐BDSA exhibits a specific capacity of 696 mAh g−1 at 2500 mA g−1 and excellent cycling stability for 1000 cycles with 0.035% capacity decay per cycle.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Cited by
MXenes for Non‐Lithium‐Ion (Na, K, Ca, Mg, and Al) Batteries and Supercapacitors
Aslam, M. K., Niu, Y., & Xu, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000681 · Cited by 337
Revitalising sodium–sulfur batteries for non-high-temperature operation: a crucial review
Wang, Y., Zhou, D., Palomares, V., Shanmukaraj, D., Sun, B., Tang, X., Wang, C., Armand, M., Rojo, T., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02203a · Cited by 327
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Lu, Y., Liang, J., Deng, S., He, Q., Deng, S., Hu, Y., & Wang, D. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.103993 · Cited by 312
Carbon quantum dot micelles tailored hollow carbon anode for fast potassium and sodium storage
Hong, W., Zhang, Y., Yang, L., Tian, Y., Ge, P., Hu, J., Wei, W., Zou, G., Hou, H., & Ji, X. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104038 · Cited by 296
Self-citation
Metadata
- Authors
- Wu, T., Jing, M., Yang, L., Zou, G., Hou, H., Zhang, Y., Zhang, Y., Cao, X., & Ji, X.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-01-09
- Volume
- 9
- Issue
- 9
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2910705105
- Cited by
- 210
- References
- 1
- FWCI
- 10.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Controllable Chain‐Length for Covalent Sulfur–Carbon Materials Enabling Stable and High‐Capacity Sodium Storage. https://app.cochat.ai/papers/10.1002/aenm.201803478
- The paper
- Wu, T., Jing, M., Yang, L., Zou, G., Hou, H., Zhang, Y., Zhang, Y., Cao, X., & Ji, X. (2019). Controllable Chain‐Length for Covalent Sulfur–Carbon Materials Enabling Stable and High‐Capacity Sodium Storage. Advanced Energy Materials. https://doi.org/10.1002/aenm.201803478
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.