Predictions and Strategies Learned from Machine Learning to Develop High‐Performing Perovskite Solar Cells
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Perovskite solar cells (PSCs) have recently received considerable attention due to the high energy conversion efficiency achieved within a few years of their inception. However, a machine learning (ML) approach to guide the development of high‐performing PSCs is still lacking. In this paper ML is used to optimize material composition, develop design strategies, and predict the performance of PSCs. The ML models are developed using 333 data points selected from about 2000 peer reviewed publications. These models guide the design of new perovskite materials and the development of high‐performing solar cells. Based on ML guidance, new perovskite compositions are experimentally synthesized to test the practicability of the model. The ML model also shows its ability to predict underlying physical phenomena as well as the performance of PSCs. The PSC model matches well with the theoretical prediction by the Shockley and Queisser limit, which is almost impossible for a human to find from an ensemble of data points. Moreover, strategies for developing high‐performing PSCs with different bandgaps are also derived from the model. These findings show that ML is very promising not only for predicting the performance, but also for providing a deeper understanding of the physical phenomena associated with the PSCs.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells
Yang, W. S., Park, B.-W., Jung, E. H., Jeon, N. J., Kim, Y. C., Lee, D. U., Shin, S. S., Seo, J., Kim, E. K., Noh, J. H., et al. (2017) · Science · doi:10.1126/science.aan2301 · Cited by 5,445
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
Jung, E. H., Jeon, N. J., Park, E. Y., Moon, C. S., Shin, T. J., Yang, T.-Y., Noh, J. H., & Seo, J. (2019) · Nature · doi:10.1038/s41586-019-1036-3 · Cited by 2,305
Tabulated values of the Shockley–Queisser limit for single junction solar cells
Rühle, S. (2016) · Solar Energy · doi:10.1016/j.solener.2016.02.015 · Cited by 2,047
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Research works printed but not linked: 1
- Martínez‐Denegri G., 2018, ACS Appl. Energy Mater., 1, 5548
Cited by
Items 201–246 of 246
Cawte, T. (2022) · TSpace (University of Toronto) · Cited by 2
Machine Learning and Artificial Intelligence in Composite Materials: A Comprehensive ReviewPreprint
Abdulhussein, A. B., & Senturk, I. F. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5343332 · Cited by 2
Advanced Photovoltaic Degradation Analysis using Physics Modeling and Bayesian Machine Learning
Chakar, J. (2024) · theses.fr (ABES) · doi:10.70675/58413045z908bz4d37z9e30zf379d443c34d · Cited by 2
Samantaray, N., Tonk, A., & Singh, A. (2023) · International Journal of convergence in healthcare · doi:10.55487/hn95n004 · Cited by 1
Machine learning-based prediction of perovskite material photovoltaic conversion efficiency grades
Zhang, X., Chen, H., & Chen, Z. (2024) · International Conference on Energy System, Electricity, and Power (ESEP) · doi:10.1117/12.3024648 · Cited by 1
Jiménez-Díaz, M. Z., Sepúlveda, A., & Londoño, M. A. B. (2025) · Lecture notes in computer science · doi:10.1007/978-3-031-96997-3_19 · Cited by 1
Choi, M., Sable, A., Ramos, N., Sheridan, R. J., Delaire, O. A., Li, H., Mitzi, D. B., & Brinson, L. C. (2025) · Solar Energy · doi:10.1016/j.solener.2025.114112 · Cited by 1
Predicting solar cell efficiencies using historical data from a manufacturing process
Mittra, S., & Prasad, V. (2025) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.70166 · Cited by 1
Kajikawa, S., Kaneko, M., NAKAJIMA, T., Yamashita, K., & Muraoka, A. (2026) · Journal of Computer Chemistry Japan · doi:10.2477/jccj.2026-0005 · Cited by 1
Research progress on the application of machine learning in perovskite solar cells
Wang, A., Zhang, H., Du, K., Li, L., & Ding, J. (2026) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/csb-2025-5719 · Cited by 1
Machine learning and artificial intelligence in polymer matrix composite materials: A review
Abdulhussein, A. B., Senturk, I. F., TOPBAŞOĞLU, M. C., & Altayli, I. Y. (2026) · International Advanced Researches and Engineering Journal · doi:10.35860/iarej.1753185 · Cited by 1
Machine learning assisted development of lead-free Cs3Bi2I9 perovskite solar cells
Choudhary, A., Rumman, A. H., Sahriar, M. A., Islam, M. T., Ahmed, S., & Efstathiadis, H. (2026) · Solar Energy · doi:10.1016/j.solener.2026.114743 · Cited by 1
Machine Learning-Driven Advances in Perovskite Materials and Solar Cells
Ren, J., Geng, X., Liu, S., Liu, Q., Li, S., & Ren, T. (2026) · Nanomaterials · doi:10.3390/nano16140898 · Cited by 1
Dar, S. A., & Sengar, B. S. (2026) · Materials Today Chemistry · doi:10.1016/j.mtchem.2026.103903 · Cited by 1
Peng, J. J., Duan, M., Li, M., He, Y., Hao, H., Li, M., Zhang, C., Chen, Z., Yu, Q., Yan, Q., et al. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta04986a · Cited by 1
Comparative Analyses of Data Driven Machine Learning Models for TADF EmittersPreprint
Bhattacharyya, K. (2023) · ChemRxiv · doi:10.26434/chemrxiv-2023-zj3tv · Cited by 1
Solar-GECO: Perovskite Solar Cell Property Prediction with Geometric-Aware Co-AttentionPreprint
Li, L., Puel, J., Carton, F., Barrit, D., & Giraldo, J. H. (2025) · arXiv (Cornell University) · doi:10.48550/arxiv.2511.19263 · Cited by 1
Pandey, S. (2026) · Research Square · doi:10.21203/rs.3.rs-10810357/v1 · Cited by 1
Fabrication and Simulation of Perovskite Solar Cells
Workman, M. (2021) · UKnowledge (University of Kentucky) · doi:10.13023/etd.2021.160
Geometric and topological AI for molecular sciences
Wee, J. (2023) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/165903
Machine Learning for Photovoltaic Applications
Dwivedi, P., & Hameiri, Z. (2024) · Wiley eBooks · doi:10.1002/9781119578826.ch19
Olimov, A., Razykov, T. M., Kuchkarov, К. M., Ergashev, B. A., Shukurov, A., Makhmanov, U. K., & Mavlonov, A. (2025) · Thin Solid Films · doi:10.1016/j.tsf.2025.140660
Liang, R., Liu, Q., Hu, C., Zheng, J., Li, Y., Wang, Y., & Mai, Y. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5180638
Logistic regression exploration of host–dopant compatibility in MR-TADF-based OLEDs
Yue, H., HUANG, S. H., Guan, X., Tian, Y., Su, H., Shao, H., Zhang, Q., Guo, R., & Wang, L. (2025) · Optics Letters · doi:10.1364/ol.568492
61Chapter 3 Interface engineering and charge transport layers
Shukla, R., Srivastava, A., & Singh, N. (2025) · De Gruyter eBooks · doi:10.1515/9783111726847-003
Machine learning for predicting and improving perovskite properties
Liu, X., & Zhan, H. (2025) · Semiconductors and semimetals · doi:10.1016/bs.semsem.2025.09.004
Density Estimation Based on Mixtures of Gaussians for Perovskite Solar Cells Modeling
Sepúlveda, A., Cerro-Ramos, D., & Jacobsson, T. J. (2026) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.5c02017
Pinisetty, S. K., Walker, J., Moyez, S. A., Thumu, U., She, K., & Zhong, T. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6107222
Pinisetty, S. K., Walker, J., Moyez, S. A., Thumu, U., She, K., & Zhong, T. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.6107221
Chandramohan, M., Gopal, M., Sadhukhan, T., Nambiar, A., & Deo, M. S. (2026) · Journal of Materials Chemistry C · doi:10.1039/d6tc00296j
Machine Learning‐Assisted Screening of Small Molecules for Surface Modification of 2D Perovskites
Zhang, H., Zhou, J., Huang, J., Ma, Y., Zhao, S., Zhang, X., & Wang, J. (2026) · Advanced Materials Technologies · doi:10.1002/admt.70989
Machine Learning Approaches in Perovskite Materials
Younsi, Z., Bencherif, H., Meddour, F., Sasikumar, P., Rabhi, S., & Khaouani, M. (2026) · Wiley eBooks · doi:10.1002/9781394270705.ch46
Bandgap Prediction in Mixed $\text{Sn}-\text{Pb}$ Perovskites via Regression Models
Marwaha, S., & Biswas, D. (2025) · IEEE International Conference on Smart Technologies for Power, Energy and Control (STPEC) · doi:10.1109/stpec66316.2025.11490525
Computational Investigations on Stability of Perovskite Solar Cells: A Real Challenge
Tiwari, U., Raj, A., Pundir, S. K., Singh, B., & Kumar, M. (2026) · Springer tracts in electrical and electronics engineering · doi:10.1007/978-981-95-6521-4_8
Pinisetty, S. K., Walker, J., Moyez, S. A., She, K., Thumu, U., & Zhong, T. (2026) · Computational Condensed Matter · doi:10.1016/j.cocom.2026.e01340
Ibrahim, A. Q., Rehan, M. A., Hayat, B., & Hermaputi, R. L. (2026) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2026.117526
Zhao, X. Q., Hao, X., Wang, M., Zhang, Y., Zhou, J., Fan, B., & Li, M. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta03693g
Parvizi, P., Zangeneh, M. R., Amidi, A. M., & Jalilian, M. (2026) · Next Energy · doi:10.1016/j.nxener.2026.100817
Pinoski, L., Stone, C., Viloria, A., VanSant, B., Velasco, C., & Menezes, P. L. (2026) · Ceramics · doi:10.3390/ceramics9080087
Jianwei, G. O. N. G. (2026) · Engineering Technology & Applied Science Research · doi:10.48084/etasr.19387
Pressure engineering in perovskite solar cells: From lattice distortion to device stability
Adjah, J., Dzikunu, P., Agyei‐Tuffour, B., Ichwani, R., Gbologah, Y. H., Mensah‐Darkwa, K., Gikunoo, E., Xiong, Y., & Soboyejo, W. O. (2026) · Materials Today Physics · doi:10.1016/j.mtphys.2026.102231
A FAIR approach towards constructing a computational perovskite database
Desai, R., Strachan, A. H., & Mannodi‐Kanakkithodi, A. (2026) · MRS Communications · doi:10.1557/s43579-026-01039-1
Gupta, T., Bhardwaj, A., & Kumar, A. (2026) · Discover Electronics · doi:10.1007/s44291-026-00285-w
Reza, M. S., Shamim, C. A. H., Islam, M. S., Chowdhury, M. R., Ghosh, A., Shimul, A. I., & Rahman, M. A. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110996
Mahmoud, M. N. H. (2026) · RIO (Universidad Pablo de Olavide)
Ali, F., He, S., Zhu, P., Israr, N., Wu, P., Liang, J., Lin, J., Dong, H., Xi, J., Wu, Z., et al. (2026) · Nanoscale · doi:10.1039/d6nr02855a
Metadata
- Authors
- Li, J., Pradhan, B., Gaur, S., & Thomas, J.
- Affiliations
- University of Central Florida (US)
- Corresponding author
- Thomas, Jayan
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2019-10
- Volume
- 9
- Issue
- 46
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2978713836
- Cited by
- 220
- References
- 38
- Citations by year
- 2026: 27 · 2025: 51 · 2024: 48 · 2023: 35 · 2022: 22 · 2021: 28 · 2020: 8 · 2019: 1
- FWCI
- 5.32
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Advanced Energy Materials (publishedVersion)
- Funders
- National Science Foundation (ECCS‐1351757)
- Indo-US Science and Technology Forum (BASE2018 Fellowship/1/BP)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Advanced Chemical Physics Studies
- Keywords
- perovskite solar cells, machine learning, performance prediction, Shockley-Queisser limit, band gap tuning, energy conversion efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.