The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Achieving High‐Performance and 2000 h Stability in Anion Exchange Membrane Fuel Cells by Manipulating Ionomer Properties and Electrode Optimization
Abstract
The primary function of the ionomers that are incorporated into fuel cell electrode catalyst layers is to provide pathways for ion transport between the catalyst active sites and the electrolyte. This is influenced by many variables, including the ion‐exchange capacity, water uptake, and molecular weight. In anion exchange membrane fuel cells (AEMFCs), controlling ionomer water uptake is particularly important and tailoring this property in each electrode is an important consideration when looking to maximize cell performance. In this study, three poly(norbornene) tetrablock copolymer ionomers with a range of physical properties are synthesized and incorporated into AEMFC anode and cathode electrodes. Systematic electrode engineering with these ionomers allows the peak power density to be increased by 100% (1.6 W cm‐2 → 3.2 W cm‐2) and the current density at 0.2 V to be increased by 59% (5.9 A cm‐2 → 9.4 A cm‐2). Moreover, the top‐performing electrode configuration is tested in an operating AEMFC at the US Department of Energy defined current density of 600 mA cm‐2 for 2000 h, showing a record‐low voltage decay rate of 15.36 µV h‐1 – only 3.65% –a over 2000 h. This work sets a new bar for AEMFCs, reporting the best combination of performance and durability of any AEMFC to date.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anion-exchange membranes in electrochemical energy systems
Varcoe, J. R., Atanassov, P., Dekel, D. R., Herring, A. M., Hickner, M. A., Kohl, P. A., Kucernak, A. R., Mustain, W. E., Nijmeijer, K., Scott, K., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01303d · Cited by 2,051
Self-citationProspects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells
Varcoe, J. R., & Slade, R. C. T. (2005) · Fuel Cells · doi:10.1002/fuce.200400045 · Cited by 1,260
Review of cell performance in anion exchange membrane fuel cells
Dekel, D. R. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.117 · Cited by 1,069
Poly(aryl piperidinium) membranes and ionomers for hydroxide exchange membrane fuel cells
Wang, J., Zhao, Y., Setzler, B. P., Rojas-Carbonell, S., Ben Yehuda, C., Amel, A., Page, M., Wang, L., Hu, K., Shi, L., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0372-8 · Cited by 1,012
Li, D., Park, E. J., Zhu, W., Shi, Q., Zhou, Y., Tian, H., Lin, Y., Serov, A., Zulevi, B., Baca, E. D., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0577-x · Cited by 763
Tunable High Performance Cross-Linked Alkaline Anion Exchange Membranes for Fuel Cell Applications
Robertson, N. J., Kostalik, H. A., Clark, T. J., Mutolo, P. F., Abruña, H. D., & Coates, G. W. (2010) · Journal of the American Chemical Society · doi:10.1021/ja908638d · Cited by 464
Hydroxide Solvation and Transport in Anion Exchange Membranes
Chen, C., Tse, Y.-L. S., Lindberg, G. E., Knight, C., & Voth, G. A. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b11951 · Cited by 327
Wang, L., Peng, X., Mustain, W. E., & Varcoe, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00331b · Cited by 301
Self-citationOmasta, T. J., Park, A. M., LaManna, J. M., Zhang, Y., Peng, X., Wang, L., Jacobson, D. L., Varcoe, J. R., Hussey, D. S., Pivovar, B. S., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00122g · Cited by 297
Self-citationImportance of balancing membrane and electrode water in anion exchange membrane fuel cells
Omasta, T. J., Wang, L., Peng, X., Lewis, C. A., Varcoe, J. R., & Mustain, W. E. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.006 · Cited by 292
Self-citation
Cited by
Durability of anion exchange membrane water electrolyzers
Li, D., Motz, A. R., Bae, C., Fujimoto, C., Yang, G., Zhang, F.-Y., Ayers, K. E., & Kim, Y. S. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04086j · Cited by 601
Anion-exchange membrane water electrolyzers and fuel cells
Yang, Y., Li, P., Zheng, X., Sun, W., Dou, S. X., Ma, T., & Pan, H. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00038e · Cited by 575
Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
High-performing commercial Fe–N–C cathode electrocatalyst for anion-exchange membrane fuel cells
Adabi, H., Shakouri, A., Ul Hassan, N., Varcoe, J. R., Zulevi, B., Serov, A., Regalbuto, J. R., & Mustain, W. E. (2021) · Nature Energy · doi:10.1038/s41560-021-00878-7 · Cited by 421
Self-citationAlkaline fuel cell technology - A review
Ferriday, T. B., & Middleton, P. H. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.02.203 · Cited by 381
Branched Poly(Aryl Piperidinium) Membranes for Anion‐Exchange Membrane Fuel Cells
Wu, X., Chen, N., Klok, H., Lee, Y. M., & Hu, X. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202114892 · Cited by 273
Anion Exchange Membrane Water Electrolysis Based on Nickel Ferrite Catalysts
Caprì, A., Gatto, I., Lo Vecchio, C., Trocino, S., Carbone, A., & Baglio, V. (2023) · ChemElectroChem · doi:10.1002/celc.202201056 · Cited by 57
Metadata
- Authors
- Ul Hassan, N., Mandal, M., Huang, G., Firouzjaie, H. A., Kohl, P. A., & Mustain, W. E.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2020-09
- Volume
- 10
- Issue
- 40
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W3082705362
- Cited by
- 291
- References
- 30
- FWCI
- 15.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.