The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Asymmetrically Coordinated Cu–N1C2 Single‐Atom Catalyst Immobilized on Ti3C2Tx MXene as Separator Coating for Lithium–Sulfur Batteries
Abstract
Lithium–sulfur (Li–S) batteries are receiving great attention owing to their large theoretical energy density, but the shuttle effect and sluggish kinetic conversion of lithium polysulfides (LiPSs) seriously restrict their practical applications. Herein, various metal single‐atom catalysts immobilized on nitrogen‐doped Ti 3 C 2 Tx (M SA/N‐Ti 3 C 2 Tx, M = Cu, Co, Ni, Mn, Zn, In, Sn, Pb, and Bi) are successfully prepared by a neoteric vacancy‐assisted strategy, applied as polypropylene (PP) separator coatings to facilitate the fast redox conversion and adsorption of LiPSs for boosting Li–S batteries. Of particular note, among the M SA/N‐Ti 3 C 2 Txs, Cu SA/N‐Ti 3 C 2 Tx/PP exhibits amazing properties, involving excellent rate performance (925 mAh g−1 at 3 C), superb cycling stability over 1000 cycles, and ultra‐high sulfur utilization even at large sulfur loadings (7.19 mg cm−2; an areal capacity of 5.28 mAh cm−2). X‐ray absorption fine spectroscopy and density functional theory calculations reveal that the asymmetrically coordinated Cu–N 1 C 2 moieties act as the active sites, which possess a higher binding energy and a larger electron cloud with LiPSs than pristine Ti 3 C 2 Tx, facilitating the adsorption and kinetic conversion of LiPSs effectively. This work may provide new insights into single atom‐decorated ultrathin 2D materials for enhancing electrochemical performance of advanced batteries for energy storage and conversion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lu, Y., Fan, D., Wang, Y., Xu, H., Lu, C., & Yang, X. (2021) · ACS Nano · doi:10.1021/acsnano.1c02578 · Cited by 426
Self-citationLiu, H., Hu, Z., Liu, Q., Sun, P., Wang, Y., Chou, S., Hu, Z., & Zhang, Z. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta09538a · Cited by 176
Self-citation
Cited by
Single Atom Catalysts Based on Earth-Abundant Metals for Energy-Related Applications
Kment, Š., Bakandritsos, A., Tantis, I., Kmentová, H., Zuo, Y., Henrotte, O., Naldoni, A., Otyepka, M., Varma, R. S., & Zbořil, R. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00155 · Cited by 311
Rechargeable Metal-Sulfur Batteries: Key Materials to Mechanisms
Yao, W., Liao, K., Lai, T., Sul, H., & Manthiram, A. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00919 · Cited by 287
Metadata
- Authors
- Gu, H., Yue, W., Hu, J., Niu, X., Tang, H., Qin, F., Li, Y., Yan, Q., Liu, X., Xu, W., Sun, Z., Liu, Q., Yan, W., Zheng, L., Wang, Y., Wang, H., Li, X., Zhang, L., Xia, G., & Chen, W.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2023-04-09
- Volume
- 13
- Issue
- 20
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W4362736355
- Cited by
- 161
- References
- 2
- FWCI
- 11.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.