The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
New sorbents for desulfurization of diesel fuels via π‐complexation
Open accessAbstract
Desulfurization of a commercial diesel fuel by different adsorbents was studied in a fixed‐bed adsorber operated at ambient temperature and pressure. In general, the adsorbents tested for total sulfur adsorption capacity at breakthrough followed the order: AC/Cu(I)‐Y > Cu(I)‐Y > Selexsorb® CDX (alumina) > CuCl/γ‐Al 2 O 3 > activated carbon > Cu(I)‐ZSM‐5. The best adsorbent, AC/Cu(I)‐Y (layered bed of 15 wt % activated carbon followed by Cu(I)Y), is capable of producing 30 cm 3 of diesel fuel per gram of adsorbent with a weighted average content of 0.15 ppmw‐S, and about 20 cm 3 of diesel fuel per gram of adsorbent with a weighted average content of 0.06 ppmw‐S. These low‐sulfur fuels are suitable for fuel cell applications. The added layer of carbon not only delayed the sulfur breakthrough significantly but also sharpened the sulfur wavefronts. GC‐FPD results showed that the π‐complexation sorbents selectively adsorbed highly substituted thiophenes, benzothiophenes, and dibenzothiophenes from diesel, which is not possible with conventional hydrodesulfurization (HDS) reactors. The high sulfur selectivity and high sulfur capacity of Cu(I)Y were because of π‐complexation. © 2004 American Institute of Chemical Engineers AIChE J, 50: 791–801, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Self-citationOlefin/paraffin separations by adsorption: π‐Complexation vs. kinetic separation
Rege, S. U., Padin, J., & Yang, R. T. (1998) · AIChE Journal · doi:10.1002/aic.690440405 · Cited by 225
Self-citationNew sorbents for olefin/paraffin separations by adsorption via π ‐complexation
Yang, R. T., & Kikkinides, E. S. (1995) · AIChE Journal · doi:10.1002/aic.690410309 · Cited by 213
Self-citationDeactivation of π-Complexation Adsorbents by Hydrogen and Rejuvenation by Oxidation
Jayaraman, A., Yang, R. T., Munson, C. L., & Chinn, D. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0102753 · Cited by 36
Self-citation
Cited by
Recent advances in the science and technology of ultra low sulfur diesel (ULSD) production
Stanislaus, A., Marafi, A., & Rana, M. S. (2010) · Catalysis Today · doi:10.1016/j.cattod.2010.05.011 · Cited by 1,264
A Series of Isoreticular, Highly Stable, Porous Zirconium Oxide Based Metal–Organic Frameworks
Guillerm, V., Ragon, F., Dan‐Hardi, M., Devic, T., Vishnuvarthan, M., Campo, B., Vimont, A., Clet, G., Yang, Q., Maurin, G., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204806 · Cited by 499
Hernández-Maldonado, A. J., Yang, F. H., Qi, G., & Yang, R. T. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.06.023 · Cited by 371
Self-citationAdsorptive desulfurization by activated alumina
Srivastav, A., & Srivastava, V. C. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.05.088 · Cited by 283
Metadata
- Authors
- Hernández‐Maldonado, A. J., & Yang, R. T.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2004-04
- Volume
- 50
- Issue
- 4
- Pages
- 791-801
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2007648418
- Cited by
- 208
- References
- 4
- FWCI
- 24.96
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.