The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Separation of azeotropic mixtures using hyperbranched polymers or ionic liquids
Abstract
In this work the suitability of selected commercially available hyperbranched polymers and ionic liquids as entrainers for the extractive distillation and as extraction solvents for the liquid–liquid extraction is investigated. Based on thermodynamic studies on the influence of hyperbranched polymers and ionic liquids on the vapor–liquid and liquid–liquid equilibrium of the azeotropic ethanol–water and THF–water systems, process simulations are carried out, which allow evaluating the potential of hyperbranched polymers and ionic liquids as selective components for the mentioned applications in terms of feasibility and energetic efficiency. Both hyperbranched polymers and ionic liquids break a variety of azeotropic systems. Since their selectivity, capacity, viscosity, and thermal stability can be customized, they appear superior to many conventional entrainers and extraction solvents. For the ethanol–water separation, the nonvolatile substances hyperbranched polyglycerol and [EMIM]+[BF 4]− show a remarkable entrainer performance and therefore enable extractive distillation processes, which require less energy than the conventional process using 1,2‐ethanediol as an entrainer. Evaluation of a new THF–water separation process indicates the competitiveness of the suggested process and a considerable potential of using hyperbranched polymers as extraction solvents. © 2004 American Institute of Chemical Engineers AIChE J 50: 2439–2454, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Room-Temperature Ionic Liquids: Solvents for Synthesis and Catalysis. 2
Hallett, J. P., & Welton, T. (2011) · Chemical Reviews · doi:10.1021/cr1003248 · Cited by 12,578
Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis
Welton, T. (1999) · Chemical Reviews · doi:10.1021/cr980032t · Cited by 11,852
Local compositions in thermodynamic excess functions for liquid mixtures
Renon, H., & Prausnitz, J. M. (1968) · AIChE Journal · doi:10.1002/aic.690140124 · Cited by 6,768
Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts
Bonhôte, P., Dias, A.-P., Papageorgiou, N., Kalyanasundaram, K., & Grätzel, M. (1996) · Inorganic Chemistry · doi:10.1021/ic951325x · Cited by 4,358
(2002) · Wiley eBooks · doi:10.1002/3527600701 · Cited by 3,960
Hyperbranched polymers: from synthesis to applications
Gao, C., & Yan, D. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.12.002 · Cited by 2,040
Ionic Liquids for Clean Technology
Seddon, K. R. (1997) · Journal of Chemical Technology & Biotechnology · doi:10.1002/(sici)1097-4660(199704)68:4<351::aid-jctb613>3.0.co;2-4 · Cited by 2,034
Air and water stable 1-ethyl-3-methylimidazolium based ionic liquids
Wilkes, J. S., & Zaworotko, M. J. (1992) · Journal of the Chemical Society, Chemical Communications · doi:10.1039/c39920000965 · Cited by 1,883
User guide on process integration for the efficient use of energy
Linnhoff, B. (1982) · Pergamon Press eBooks · Cited by 1,109
New developments in catalysis using ionic liquids
Gordon, C. M. (2001) · Applied Catalysis A: General · doi:10.1016/s0926-860x(01)00834-1 · Cited by 1,004
Functional dendrimers, hyperbranched and star polymers
Inoue, K. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00011-3 · Cited by 879
User guide on process integration for the efficient use of energy
Aird, R. J. (1983) · The Chemical Engineering Journal · doi:10.1016/0300-9467(83)80027-6 · Cited by 753
Hyperbranched polymers 10 years after
Kim, Y. H. (1998) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(199808)36:11<1685::aid-pola1>3.0.co;2-r · Cited by 737
Water soluble hyperbranched polyphenylene: "a unimolecular micelle?"
Kim, Y. H., & Webster, O. W. (1990) · Journal of the American Chemical Society · doi:10.1021/ja00167a094 · Cited by 703
Ionische Flüssigkeiten – neue „Lösungen“ für die Übergangsmetallkatalyse
Wasserscheid, P., & Keim, W. (2000) · Angewandte Chemie · doi:10.1002/1521-3757(20001103)112:21<3926::aid-ange3926>3.0.co;2-u · Cited by 650
Hult, A., Johansson, M., & Malmström, E. (2007) · Advances in Polymer Science · doi:10.1007/3-540-49780-3_1 · Cited by 360
Controlling the Growth of Polymer Trees: Concepts and Perspectives For Hyperbranched Polymers
Sunder, A., Heinemann, J., & Frey, H. (2000) · Chemistry - A European Journal · Cited by 282
Influence of Ionic Liquids on the Phase Behavior of Aqueous Azeotropic Systems
Jork, C., Seiler, M., Beste, Y.-A., & Arlt, W. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je034183r · Cited by 220
Self-citationWooley, K. L., Fréchet, J. M. J., & Hawker, C. J. (1994) · Polymer · doi:10.1016/0032-3861(94)90793-5 · Cited by 214
Springer-Verlag (1998) · Medical Entomology and Zoology · Cited by 130
Structure Buildup in Hyperbranched Polymers from 2,2-Bis(hydroxymethyl)propionic Acid
Magnusson, H., Malmström, E., & Hult, A. (2000) · Macromolecules · doi:10.1021/ma991100w · Cited by 112
Hyperbranched polymers: new selective solvents for extractive distillation and solvent extraction
Seiler, M., Köhler, D., & Arlt, W. (2002) · Separation and Purification Technology · doi:10.1016/s1383-5866(02)00163-6 · Cited by 83
Self-citationPhase equilibria in the system tetrahydrofuran(1)-water(2)
Matouš, J., Novák, J., Šobr, J., & Pick, J. (1972) · Collection of Czechoslovak Chemical Communications · doi:10.1135/cccc19722653 · Cited by 70
Chemical Modification Effect on the Sorption Capacities of Natural Clinoptilolite
Kurama, H., Zimmer, A., & Reschetilowski, W. (2002) · Chemical Engineering & Technology · doi:10.1002/1521-4125(200203)25:3<237::aid-ceat237>3.0.co;2-4 · Cited by 63
Klee, J. E., Schneider, C. W., Hölter, D., et al. (2001) · Polymers for Advanced Technologies · doi:10.1002/pat.116 · Cited by 55
Patterning of Hyperbranched Polymer Films
Crooks, R. M. (2001) · ChemPhysChem · doi:10.1002/1439-7641(20011119)2:11<644::aid-cphc644>3.0.co;2-# · Cited by 44
Seiler, M., Jork, C., & Arlt, W. (2004) · Chemie Ingenieur Technik · doi:10.1002/cite.200400064 · Cited by 17
Self-citation
Cited by
Gas Solubility in Ionic Liquids
Lei, Z., Dai, C., & Chen, B. (2014) · Chemical Reviews · doi:10.1021/cr300497a · Cited by 1,038
A review of separation technologies in current and future biorefineries
Huang, H.-J., Ramaswamy, S., Tschirner, U. W., & Ramarao, B. V. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2007.12.011 · Cited by 846
Solubilities and Diffusivities of Carbon Dioxide in Ionic Liquids: [bmim][PF6] and [bmim][BF4]
Shiflett, M. B., & Yokozeki, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie058003d · Cited by 627
Separation technologies for the recovery and dehydration of alcohols from fermentation broths
Vane, L. M. (2008) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.108 · Cited by 568
Extraction of organic compounds with room temperature ionic liquids
Poole, C. F., & Poole, S. K. (2010) · Journal of Chromatography A · doi:10.1016/j.chroma.2009.09.011 · Cited by 493
Metadata
- Authors
- Seiler, M., Jork, C., Kavarnou, A., Arlt, W., & Hirsch, R.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2004-09-07
- Volume
- 50
- Issue
- 10
- Pages
- 2439-2454
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2051643111
- Cited by
- 351
- References
- 27
- FWCI
- 26.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.