Regenerating flue‐gas desulfurizing agents by bipolar membrane electrodialysis
The DOI matches its Crossref record.
Abstract
An experimental study was carried out on the regeneration of a flue‐gas desulfurizing agent by using bipolar membrane electrodialysis (BMED) with sodium sulfate (Na 2 SO 4) as the supporting and rinsing electrolyte, and piperazine sulfate (Pz·H 2 SO 4) as a model compound for the heat stable salt formed in the process of desulfurizing. The results indicate that the low energy consumption and high current efficiency are achieved when applying electrolyte solutions with a concentration range about 0.3∼0.4 mol/L, piperazine sulfate solution with a concentration range about 0.08∼0.13 mol/L, and BMED stack of BP‐C‐C configuration. The results also indicate that when applying a high current density to the BMED stack, it has a high current efficiency and energy consumption. The process cost is estimated to be $0.96/kg Pz for the regeneration of piperazine with the laboratory‐scale experimental equipment, indicating that the process is not only scientifically novel but also economically feasible and attractive besides its potential environmental benefits. © 2005 American Institute of Chemical Engineers AIChE J, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Xie, M., Shon, H. K., Gray, S. R., & Elimelech, M. (2016) · Water Research · doi:10.1016/j.watres.2015.11.045 · Cited by 580
Electrodialysis-based Separation Technologies: A Critical Review
Xu, T., & Huang, C. (2008) · AIChE Journal · doi:10.1002/aic.11643 · Cited by 402
Self-citationElectrodialysis with bipolar membranes for sustainable development
Huang, C., & Xu, T. (2006) · Environmental Science & Technology · doi:10.1021/es060039p · Cited by 260
Self-citationJiang, C., Wang, Y., Wang, Q., Feng, H., & Xu, T. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie404334s · Cited by 234
Self-citation
Metadata
- Authors
- Huang, C., Xu, T., & Jacobs, M. L.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2005-09
- Volume
- 52
- Issue
- 1
- Pages
- 393-401
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2033375226
- Cited by
- 65
- References
- 0
- FWCI
- 0.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.