The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Simulation of binary mixture adsorption of methane and CO2 at supercritical conditions in carbons
Abstract
Knowledge of the adsorption behavior of coal‐bed gases, mainly under supercritical high‐pressure conditions, is important for optimum design of production processes to recover coal‐bed methane and to sequester CO 2 in coal‐beds. Here, we compare the two most rigorous adsorption methods based on the statistical mechanics approach, which are Density Functional Theory (DFT) and Grand Canonical Monte Carlo (GCMC) simulation, for single and binary mixtures of methane and carbon dioxide in slit‐shaped pores ranging from around 0.75 to 7.5 nm in width, for pressure up to 300 bar, and temperature range of 308‐348 K, as a preliminary study for the CO 2 sequestration problem. For single component adsorption, the isotherms generated by DFT, especially for CO 2, do not match well with GCMC calculation, and simulation is subsequently pursued here to investigate the binary mixture adsorption. For binary adsorption, upon increase of pressure, the selectivity of carbon dioxide relative to methane in a binary mixture initially increases to a maximum value, and subsequently drops before attaining a constant value at pressures higher than 300 bar. While the selectivity increases with temperature in the initial pressure‐sensitive region, the constant high‐pressure value is also temperature independent. Optimum selectivity at any temperature is attained at a pressure of 90‐100 bar at low bulk mole fraction of CO 2, decreasing to approximately 35 bar at high bulk mole fractions. © 2005 American Institute of Chemical Engineers AIChE J, 2006
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computer Simulation of Liquids
Allen, M. P., & Tildesley, D. J. (2017) · doi:10.1093/oso/9780198803195.001.0001 · Cited by 20,945
Role of repulsive forces in determining the equilibrium structure of simple liquids
Weeks, J. D., Chandler, D., & Andersen, H. C. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1674820 · Cited by 5,207
Span, R., & Wagner, W. (1996) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555991 · Cited by 5,049
Cited by
Mosher, K., He, J., Liu, Y., Rupp, E., & Wilcox, J. (2013) · International Journal of Coal Geology · doi:10.1016/j.coal.2013.01.001 · Cited by 684
Carbon Dioxide Storage Capacity of Organic-Rich Shales
Kang, S. M. M., Fathi, E., Ambrose, R. J. J., Akkutlu, I. Y. Y., & Sigal, R. F. F. (2011) · SPE Journal · doi:10.2118/134583-pa · Cited by 596
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
Effects of Surface Heterogeneity on the Adsorption of CO2in Microporous Carbons
Liu, Y., & Wilcox, J. (2012) · Environmental Science & Technology · doi:10.1021/es204071g · Cited by 310
High-Pressure Adsorption of Methane and Carbon Dioxide on Coal
Bae, J.-S., & Bhatia, S. K. (2006) · Energy & Fuels · doi:10.1021/ef060318y · Cited by 303
Self-citation
Metadata
- Authors
- Kurniawan, Y., Bhatia, S. K., & Rudolph, V.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2005-10-07
- Volume
- 52
- Issue
- 3
- Pages
- 957-967
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2050741094
- Cited by
- 181
- References
- 3
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.