Review and evaluation of the approximations to the temperature integral
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The kinetics of processes involving solids may be determined from experiments under non‐isothermal conditions. On analyzing data by integral methods, it is necessary to calculate the temperature integral, which does not have an analytical solution. Instead of performing the numerical integration, most of the researchers prefer to circumvent the problem by using approximate expressions, not always adequate. The widespread use of inaccurate approximations does not contribute to a coherent growth of scientific knowledge. In the present article, a critical review of the known approximations is carried out and a clear ranking is established. Moreover, the deviations of the calculated activation energies relatively to the numerical solution are discussed, and some recommendations are proposed. Namely, it is shown that a “novel” expression, previously presented in another form in the well known “Handbook of Mathematical Functions”, approximates very accurately the temperature integral and allows to obtain correct values of the activation energy. © 2007 American Institute of Chemical Engineers AIChE J, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetic Parameters from Thermogravimetric Data
COATS, A. W., & REDFERN, J. P. (1964) · Nature · doi:10.1038/201068a0 · Cited by 6,930
Pyrolysis kinetics of lignocellulosic materials—three independent reactions model
Orfão, J. J. M., Antunes, F. J. A., & Figueiredo, J. L. (1999) · Fuel · doi:10.1016/s0016-2361(98)00156-2 · Cited by 771
Cited by
A review on kinetic models and corresponding analysis methods for hydrogen storage materials
Pang, Y., & Li, Q. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.08.018 · Cited by 404
Cai, J., Wu, W., & Liu, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.052 · Cited by 347
“Either the temperature integral or the general temperature integral has no exact analytical solution [40], but they can be numerically solved.”
BackgroundPang, Y., Sun, D., Gu, Q., Chou, K.-C., Wang, X., & Li, Q. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.6b00187 · Cited by 310
Matera, S., Schneider, W. F., Heyden, A., & Savara, A. (2019) · ACS Catalysis · doi:10.1021/acscatal.9b01234 · Cited by 222
Li, J., Zhang, C., Yin, R., & Zhang, W. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.01.118 · Cited by 17
Metadata
- Authors
- Órfão, J. J. M.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2007-09-26
- Volume
- 53
- Issue
- 11
- Pages
- 2905-2915
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2131790555
- Cited by
- 117
- References
- 2
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.