The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Energy optimization for the design of corn‐based ethanol plants
Abstract
In this work, we address the problem of optimizing corn‐based bioethanol plants through the use of heat integration and mathematical programming techniques. The goal is to reduce the operating costs of the plant. Capital cost, energy usage, and yields—all contribute to production cost. Yield and energy usage also influence the viability of corn‐based ethanol as a sustainable fuel. We first propose a limited superstructure of alternative designs including the various process units and utility streams involved in ethanol production. Our objective is to determine the connections in the network and the flow in each stream in the network such that we minimize the energy requirement of the overall plant. This is accomplished through the formulation of a mixed‐integer nonlinear programming problem involving short‐cut models for mass and energy balances for all the units in the system, where the model is solved through two nonlinear programming subproblems. We then perform a heat integration study on the resulting flowsheet; the modified flowsheet includes multieffect distillation columns that further reduces energy consumption. The results indicate that it is possible to reduce the current steam consumption required in the transformation of corn into fuel grade ethanol by more than 40% compared to initial basic design. © 2008 American Institute of Chemical Engineers AIChE J, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineering Yeast Transcription Machinery for Improved Ethanol Tolerance and Production
Alper, H., Moxley, J., Nevoigt, E., Fink, G. R., & Stephanopoulos, G. (2006) · Science · doi:10.1126/science.1131969 · Cited by 823 · cited 5×
“Model (P1) comprises constraints (1)–(178), where the binary parameter is set to 1 and is set to 0.”
BackgroundInfluential
Cited by
Progress in bioethanol processing
Balat, M., Balat, H., & Öz, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2007.11.001 · Cited by 1,490
Production of bioethanol from lignocellulosic materials via the biochemical pathway: A review
Balat, M. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.08.013 · Cited by 1,420
Integrated versus stand-alone second generation ethanol production from sugarcane bagasse and trash
Dias, M. O. S., Junqueira, T. L., Cavalett, O., Cunha, M. P., Jesus, C. D. F., Rossell, C. E. V., Maciel Filho, R., & Bonomi, A. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.09.120 · Cited by 380
Grossmann, I. E., & Guillén-Gosálbez, G. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2009.11.012 · Cited by 274
Self-citationTechno-economic evaluation of the production of polyesters from glycerol and adipic acid
Bueno, L., Toro, C., & Martín, M. (2015) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2014.05.010 · Cited by 32
Self-citation
Metadata
- Authors
- Karuppiah, R., Peschel, A., Grossmann, I. E., Martín, M., Martinson, W., & Zullo, L.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2008-04-10
- Volume
- 54
- Issue
- 6
- Pages
- 1499-1525
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2016562370
- Cited by
- 167
- References
- 1
- FWCI
- 22.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.