The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Product yields and kinetics from the vapor phase cracking of wood pyrolysis tars
Abstract
The homogeneous vapor phase cracking of newly formed wood pyrolysis tar was studied at low molar concentrations as a function of temperature (773–1,073 K), at residence times of 0.9–2.2 s. Tar conversions ranged from about 5 to 88%. The tars were generated by low heating rate (0.2 K/s) pyrolysis of ∼2 cm deep beds of sweet gum hardwood, and then rapidly conveyed to an adjacent reactor for controlled thermal treatment. Quantitative yields and kinetics were obtained for tar cracking and resulting products formation. The major tar conversion product was carbon monoxide, which accounted for over two‐thirds of the tar lost at high severities. Corresponding ethylene and methane yields were each about 10% of the converted tar. Coke formation was negligible and weight‐average tar molecular weight declined with increasing tar conversion. A first‐order distributed activation energy model more closely correlated tar conversion kinetics over a wider range of reaction conditions than did a single‐reaction model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Boundary conditions of flow reactor
Wehner, J., & Wilhelm, R. H. (1956) · Chemical Engineering Science · doi:10.1016/0009-2509(56)80014-6 · Cited by 549
Product compositions and kinetics in the rapid pyrolysis of sweet gum hardwood
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a053 · Cited by 217
Self-citationModern Size-Exclusion Liquid Chromatography
WILSON, K. (1980) · Biochemical Society Transactions · doi:10.1042/bst0080772a · Cited by 200
Antal, M. J. (1983) · Industrial & Engineering Chemistry Product Research and Development · doi:10.1021/i300010a039 · Cited by 171
Fortschritte der chemischen Forschung
Weigel, L. (1969) · Zeitschrift für Physikalische Chemie · doi:10.1524/zpch.1969.63.5_6.333 · Cited by 28
Chan, R., & Krieger, B. B. (1983) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 8
Rapid pyrolysis of sweet gum wood and milled wood lignin
Nunn, T. R. (1981) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 4
Cited by
Kan, T., Strezov, V., & Evans, T. J. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.185 · Cited by 2,239
Modeling chemical and physical processes of wood and biomass pyrolysis
DIBLASI, C. (2008) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.12.001 · Cited by 1,752
An overview of fast pyrolysis of biomass
Bridgwater, A. V., Meier, D., & Radlein, D. (1999) · Organic Geochemistry · doi:10.1016/s0146-6380(99)00120-5 · Cited by 1,752
White, J. E., Catallo, W. J., & Legendre, B. L. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.01.004 · Cited by 1,232
Modeling of biomass gasification in fluidized bed
Gómez-Barea, A., & Leckner, B. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.12.002 · Cited by 905
Metadata
- Authors
- Boroson, M. L., Howard, J. B., Longwell, J. P., & Peters, W. A.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1989-01
- Volume
- 35
- Issue
- 1
- Pages
- 120-128
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2114281525
- Cited by
- 350
- References
- 7
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.