The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Curvature and parametric sensitivity in models for adsorption in micropores
Abstract
The sensitivity of the calculated micropore size of zeolite Y in a fluidized cracking catalyst based on empirical models for argon adsorption has been tested by examining the effect of curvature and by systematically verifying the magnitude of physical constants in the model equations. With a consistent set of physical parameters the slit model provided a pore size value of 0.45 nm, while the new cylindrical models provided values of 0.69 and 0.74 nm. The latter values are found to correspond well with the known aperture size of zeolite Y, 0.74 nm. By separately varying the magnitudes of five of the physical constants in the model over a range of ±30%, it was concluded that the diameter of the oxide ion at the surface had a large effect on the calculated pore size, while the other parameters had only moderate to small effects. Preliminary application of the cylindrical pore model to isotherms of argon on other zeolites and molecular sieves leads to promising results, especially for medium to large pore zeolites. These results suggest that the cylindrical pore model is a useful means for the transformation of argon adsorption data on a zeolite into a micropore size distribution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
On a theory of the van der waals adsorption of gases
Brunauer, S., Deming, L. S., Deming, W. E., & Teller, E. (1940) · Journal of the American Chemical Society · doi:10.1021/ja01864a025 · Cited by 4,829
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Method for the calculation of effective pore size distribution in molecular sieve carbon.
HORVÁTH, G., & KAWAZOE, K. (1983) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.16.470 · Cited by 1,967
Surface tension and adsorption
Defay, R., Prigogine, I., Bellemans, A., & Everett, D. H. (1966) · CERN Document Server (European Organization for Nuclear Research) · Cited by 1,909
Everett, D. H., & Powl, J. C. (1976) · Journal of the Chemical Society, Faraday Transactions 1: Physical Chemistry in Condensed Phases · doi:10.1039/f19767200619 · Cited by 655
Chemistry and Physics of Carbon
(2021) · CRC Press eBooks · doi:10.1201/9781003210184 · Cited by 455
Atlas of zeolite structure types
Derouane, É. G. (1988) · Journal of Molecular Catalysis · doi:10.1016/0304-5102(88)85136-8 · Cited by 407
An introduction to zeolite molecular sieves
Weitkamp, J. (1989) · Applied Catalysis · doi:10.1016/0166-9834(89)80021-1 · Cited by 325
Pore structure analysis without a pore shape model
Brunauer, S., Mikhail, R. S., & Bodor, E. E. (1967) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(67)90243-3 · Cited by 319
Physicochemical properties of VPI-5
Davis, M. E., Montes, C., Hathaway, P. E., Arhancet, J. P., Hasha, D. L., & Garces, J. M. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00193a024 · Cited by 213
VPI-5: The first molecular sieve with pores larger than 10 Ångstroms
Davis, M. E., Saldarriaga, C., Montes, C., et al. (1988) · Zeolites · doi:10.1016/s0144-2449(88)80172-6 · Cited by 170
Derouane, É. G., André, J. M., & Lucas, A. A. (1987) · Chemical Physics Letters · doi:10.1016/0009-2614(87)80895-3 · Cited by 144
The energetics of sorption by molecular sieves: Surface curvature effects
Derouane, É. G. (1987) · Chemical Physics Letters · doi:10.1016/0009-2614(87)80922-3 · Cited by 112
UTILISATION OF ADSORPTION DATA IN THE BET REGION
Sing, K. S. W. (1970) · Elsevier eBooks · doi:10.1016/b978-0-408-70077-1.50008-7 · Cited by 97
Cited by
Gas Adsorption Characterization of Ordered Organic−Inorganic Nanocomposite Materials
Kruk, M., & Jaroniec, M. (2001) · Chemistry of Materials · doi:10.1021/cm0101069 · Cited by 3,413
Groen, J. C., Peffer, L. A. A., & Pérez-Ramı́rez, J. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00339-1 · Cited by 2,131
Surface area and pore texture of catalysts
Leofanti, G., Padovan, M., Tozzola, G., & Venturelli, B. (1998) · Catalysis Today · doi:10.1016/s0920-5861(98)00050-9 · Cited by 1,883
Low dielectric constant materials for microelectronics
Maex, K., Baklanov, M. R., Shamiryan, D., lacopi, F., Brongersma, S. H., & Yanovitskaya, Z. S. (2003) · Journal of Applied Physics · doi:10.1063/1.1567460 · Cited by 1,634
Physical Adsorption Characterization of Nanoporous Materials
Thommes, M. (2010) · Chemie Ingenieur Technik · doi:10.1002/cite.201000064 · Cited by 1,394
Metadata
- Authors
- Saito, A., & Foley, H. C.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1991-03
- Volume
- 37
- Issue
- 3
- Pages
- 429-436
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W1979414508
- Cited by
- 512
- References
- 15
- FWCI
- 8.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.