The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Design parameters estimation for scale‐up of high‐pressure bubble columns
Abstract
Experiments were carried out in bubble columns for a number of liquids at pressures between 0.1 and 2.0 MPa for two column sizes. Based on the experimental results as well as extensive literature data, the extent of the effect column dimensions have on gas holdup were determined, both at low and high pressures (which is of importance to scale‐up). It was also demonstrated that none of the published empirical gas holdup equations incorporate the influence of gas density accurately. Therefore, a new improved gas hold‐up equation is developed that incorporates the influence of gas and liquid properties with an average error of approximately 10%. Finally, it is also discussed to what extent theinfluence of pressure on other important design parameters such as the interfacial area, the liquid volumetric mass transfer coefficient, and gas and liquid mixing, can be estimated on the basis of empirical equations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design parameters estimations for bubble column reactors
Shah, Y. T., Kelkar, B. G., Godbole, S. P., & Deckwer, W. ‐. (1982) · AIChE Journal · doi:10.1002/aic.690280302 · Cited by 1,202
The continuous phase heat and mass-transfer properties of dispersions
Calderbank, P. H., & Moo-Young, M. B. (1961) · Chemical Engineering Science · doi:10.1016/0009-2509(61)87005-x · Cited by 846
Bubble Size, Interfacial Area, and Liquid-Phase Mass Transfer Coefficient in Bubble Columns
Akita, K., & Yoshida, F. (1974) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260049a016 · Cited by 732
Gas Holdup and Volumetric Mass Transfer Coefficient in Bubble Columns. Effects of Liquid Properties
Akita, K., & Yoshida, F. (1973) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260045a015 · Cited by 684
Hikita, H., Asai, S., Tanigawa, K., Segawa, K., & Kitao, M. (1980) · The Chemical Engineering Journal · doi:10.1016/0300-9467(80)85006-4 · Cited by 287
Hydrodynamic Properties of the Fischer-Tropsch Slurry Process
Deckwer, W.-D., Louisi, Y., Zaidi, A., & Ralek, M. (1980) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i260076a032 · Cited by 254
The operation of a bubble column at high throughputs
Hills, J. H. (1976) · The Chemical Engineering Journal · doi:10.1016/0300-9467(76)87002-5 · Cited by 194
Krishna, R., Wilkinson, P. M., & Van Dierendonck, L. L. (1991) · Chemical Engineering Science · doi:10.1016/0009-2509(91)80042-w · Cited by 167
Self-citationPerformance of gas bubble columns: Volumetric liquid‐phase mass transfer coefficient and gas holdup
Yoshida, F., & Akita, K. (1965) · AIChE Journal · doi:10.1002/aic.690110106 · Cited by 159
The volumetric liquid-phase mass transfer coefficient in bubble columns
Hikita, H., Asai, S., Tanigawa, K., Segawa, K., & Kitao, M. (1981) · The Chemical Engineering Journal · doi:10.1016/0300-9467(81)85006-x · Cited by 148
Gas-liquid-solid fluidization engineering
Epstein, N. (1990) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(90)90132-e · Cited by 148
A correlation for gas holdup in turbulent coalescing bubble columns
Reilly, I. G., Scott, D. S., de Bruijn, T. J. W., Jain, A., & Piskorz, J. (1986) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450640501 · Cited by 145
Bubble break-up in gas—liquid bioreactors: Break-up in turbulent flows
Walter, J. F., & Blanch, H. W. (1986) · The Chemical Engineering Journal · doi:10.1016/0300-9467(86)85011-0 · Cited by 144
Pressure and gas density effects on bubble break-up and gas hold-up in bubble columns
Wilkinson, P. M., & van Dierendonck, L. L. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)80110-z · Cited by 143
Self-citationHOLDUP STRUCTURE IN HIGHLY VISCOUS NEWTONIAN AND NON-NEWTONIAN LIQUIDS IN BUBBLE COLUMNS
Godbole, S. P., Honath, M. F., & Shah, Y. T. (1982) · Chemical Engineering Communications · doi:10.1080/00986448208911090 · Cited by 105
Bubble coalescence in viscous liquids
Crabtree, J. R., & Bridgwater, J. (1971) · Chemical Engineering Science · doi:10.1016/0009-2509(71)83045-2 · Cited by 104
Coalescence and breakup of bubbles in liquids
Otake, T., Tone, S., Nakao, K., & Mitsuhashi, Y. (1977) · Chemical Engineering Science · doi:10.1016/0009-2509(77)85004-5 · Cited by 103
Physical aspects and scale-up of high pressure bubble columns
Wilkinson, P. M. (1991) · University of Groningen research database (University of Groningen / Centre for Information Technology) · Cited by 98
Self-citationThree Phase Sparged Reactors — Some Design Aspects
Pandit, A. B., & Joshi, J. B. (1984) · Reviews in Chemical Engineering · doi:10.1515/revce.1984.2.1.1 · Cited by 84
Frontiers in chemical reaction engineering
Turner, J. C. (1985) · Chemical Engineering Science · doi:10.1016/0009-2509(85)85019-3 · Cited by 76
Effect of fine particles on gas hold-up in three-phase sparged reactors
Khare, A. S., & Joshi, J. B. (1990) · The Chemical Engineering Journal · doi:10.1016/0300-9467(90)80050-m · Cited by 66
The effect of high pressure and temperature on phase distributions in a bubble column
Clark, K. N. (1990) · Chemical Engineering Science · doi:10.1016/0009-2509(90)80109-r · Cited by 64
Mass and heat transfer characteristics of three phase sparged reactors
Pandit, A. B., & Josh, J. B. (1986) · Process Safety and Environmental Protection · Cited by 61
Mixing characteristics and gas hold‐up of a bubble column
Guy, C., Carreau, P. J., & Paris, J. (1986) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450640104 · Cited by 44
Studies on gas holdup in a bubble column operated at elevated temperatures
Renjun, Z., Jiang, X., Li, B., Zu, Y., & Zhang, L. (1988) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00082a025 · Cited by 42
Determination of liquid-side and gas-side volumetric mass transfer coefficients in a bubble column.
Cho, J. S., & Wakao, N. (1988) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.21.576 · Cited by 40
Kelkar, B. G., Phulgaonkar, S. R., & Shah, Y. T. (1983) · The Chemical Engineering Journal · doi:10.1016/0300-9467(83)80069-0 · Cited by 38
Gas holdup in the bubble column with cocurrent and countercurrent gas-liquid flow.
Otake, T., Tone, S., & Shinohara, K. (1981) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.14.338 · Cited by 26
Gas holdup in a two‐phase vertical tubular reactor at high pressure
de Bruijn, T. J. W., Chase, J. D., & Dawson, W. H. (1988) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450660223 · Cited by 21
Cited by
Kantarci, N., Borak, F., & Ulgen, K. O. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.10.004 · Cited by 1,057
Wet Oxidation and Catalytic Wet Oxidation
Bhargava, S. K., Tardio, J., Prasad, J., Föger, K., Akolekar, D. B., & Grocott, S. C. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051059n · Cited by 485
Camarasa, E., Vial, C., Poncin, S., Wild, G., Midoux, N., & Bouillard, J. (1999) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/s0255-2701(99)00024-0 · Cited by 299
Wet air oxidation: a review of process technologies and aspects in reactor design
Kolaczkowski, S. T., Plucinski, P., Beltran, F. J., Rivas, F. J., & McLurgh, D. B. (1999) · Chemical Engineering Journal · doi:10.1016/s1385-8947(99)00022-4 · Cited by 287
Design and scale-up of the Fischer–Tropsch bubble column slurry reactor
Krishna, R., & Sie, S. T. (2000) · Fuel Processing Technology · doi:10.1016/s0378-3820(99)00128-9 · Cited by 279
Metadata
- Authors
- Wilkinson, P. M., Spek, A. P., & van Dierendonck, L. L.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1992-04
- Volume
- 38
- Issue
- 4
- Pages
- 544-554
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2139089841
- Cited by
- 393
- References
- 29
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.