Effects of carbon‐to‐zeolite ratio on layered bed H2 PSA for coke oven gas
The DOI matches its Crossref record.
Abstract
Effects of carbon‐to‐zeolite ratio on a layered bed H 2 PSA using activated carbon and zeolite 5A were studied experimentally and theoretically. Coke oven gas (56.4 vol. % H 2, 26.6 vol. % CH 4, 8.4 vol. % CO, 5.5 vol. % N 2, and 3.1 vol. % CO 2) was used as a feed gas for the seven‐step two‐bed PSA process incorporating a backfill step. In these experiments, the effects of three operating variables such as adsorption pressure, feed rate and purge rate on the performance of a layered bed PSA were investigated. The layered bed gave better purity than the single‐adsorbent bed at the same operating condition, except at low purge rate. Since every component had its own front velocity at each layer, a carbon‐to‐zeolite ratio affected product purity at a given recovery or throughput. Moreover, for a high‐purity H 2 product from coke oven gas, an optimum carbon‐to‐zeolite ratio had to be determined to control a leading wavefront of N 2. In layered bed PSA processes, the temperature variations inside the bed reflected a kind of inflection or plateau at which a roll‐up phenomenon occurred and showed the dynamics of adsorption well at each step during a cycle. Simulated results of the dynamic model incorporating mass, energy and momentum balances agreed well with the PSA experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Ebner, A. D., & Ritter, J. A. (2009) · Separation Science and Technology · doi:10.1080/01496390902733314 · Cited by 301
A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption
Shafeeyan, M. S., Wan Daud, W. M. A., & Shamiri, A. (2014) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2013.08.018 · Cited by 293
Advances in Pressure Swing Adsorption for Gas Separation
Grande, C. A. (2012) · ISRN Chemical Engineering · doi:10.5402/2012/982934 · Cited by 285
“Over the years it has been demonstrated that PSA technology can be used in a large variety of applications: hydrogen purification [58–72], air separation [57, 73– 80], OBOGS (on-board gas generation system) [81], CO2 removal [82–84], noble gases (He, Xe, Ar) purification [85– 87], CH4 upgrading [31, 34, 37, 40, 42, 88…”
BackgroundResultBen-Mansour, R., & Qasem, N. A. A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.010 · Cited by 139
Metadata
- Authors
- Lee, C., Yang, J., & Ahn, H.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 1999-03
- Volume
- 45
- Issue
- 3
- Pages
- 535-545
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W2058968962
- Cited by
- 83
- References
- 0
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of carbon‐to‐zeolite ratio on layered bed H2 PSA for coke oven gas. https://app.cochat.ai/papers/10.1002/aic.690450310
- The paper
- Lee, C., Yang, J., & Ahn, H. (1999). Effects of carbon‐to‐zeolite ratio on layered bed H2 PSA for coke oven gas. AIChE Journal. https://doi.org/10.1002/aic.690450310
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.