The DOI matches its Crossref record.
Pressure drop measurements in a microchannel
Abstract
Recent developments in micro‐energy and micro‐chemical systems have produced a need for greater understanding of flow in small channels. Several recent studies of friction factors and transition Reynolds numbers in rectangular microchannels have produced results that differ from classical theory. In this work, friction factors and laminar flow friction constants were determined for water flowing in high aspect ratio channels with depths ranging from 128 to 521 μm. Reynolds numbers were between 60 and 3,450. Pressure drops were measured within the channel itself to exclude entrance and exit losses. Transitions to turbulence were observed with flow visualization. Uncertainties in measured variables were quantified and propagated into the estimated friction constants. Friction factors were also determined in a 1,050‐μm‐deep channel that served as a control. After considering experimental uncertainties and systematic errors, significant differences remained between the results and classical theory.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Single-phase convective heat transfer in microchannels: a review of experimental results
Morini, G. L. (2004) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2004.01.003 · Cited by 679
Characterization of frictional pressure drop for liquid flows through microchannels
Judy, J., Maynes, D., & Webb, B. W. (2002) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(02)00076-5 · Cited by 427
Single-phase liquid friction factors in microchannels
Steinke, M. E., & Kandlikar, S. G. (2006) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2006.01.016 · Cited by 392
Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids
Dixit, T., & Ghosh, I. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.09.024 · Cited by 339
Transition from laminar to turbulent flow in liquid filled microtubes
Sharp, K. V., & Adrian, R. J. (2004) · Experiments in Fluids · doi:10.1007/s00348-003-0753-3 · Cited by 311
Hetsroni, G., Mosyak, A., Pogrebnyak, E., & Yarin, L. P. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.12.019 · Cited by 308
Single-Phase Liquid Friction Factors in Microchannels
Steinke, M. E., & Kandlikar, S. G. (2005) · ASME 3rd International Conference on Microchannels and Minichannels, Parts A and B · doi:10.1115/icmm2005-75112 · Cited by 289
Friction factors in smooth trapezoidal silicon microchannels with different aspect ratios
Wu, H. Y., & Cheng, P. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00106-6 · Cited by 285
An experimental investigation of microchannel flow with internal pressure measurements
Kohl, M. J., Abdel-Khalik, S. I., Jeter, S. M., & Sadowski, D. L. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.10.030 · Cited by 254
A review on microchannel heat exchangers and potential applications
Khan, M. G., & Fartaj, A. (2011) · International Journal of Energy Research · doi:10.1002/er.1720 · Cited by 232
“According to some authors, early transition occurs when the hydraulic diameter of the channel decreases [28,48,63,74,100, 107,136].”
BackgroundThe role of microchannel geometry selection on heat transfer enhancement in heat sinks: A review
Dash, B., Nanda, J., & Rout, S. K. (2022) · Heat Transfer · doi:10.1002/htj.22357 · Cited by 41
“Relating to the classical theory of friction factor and Reynold's number product, Pfund et al.44 have measured the pressure drops inside a rectangular microchannel excluding the entrance and exit losses.”
Method
Metadata
- Authors
- Pfund, D., Rector, D., Shekarriz, A., Popescu, A., & Welty, J.
- Venue
- AIChE Journal
- Publisher
- Wiley
- Published
- 2000-08
- Volume
- 46
- Issue
- 8
- Pages
- 1496-1507
- ISSN
- 0001-1541 (ISSN-L)
- 1547-5905
- OpenAlex
- W1968159154
- Cited by
- 232
- References
- 0
- FWCI
- 12.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.