Highly Selective Oxidation and Depolymerization of α,γ‐Diol‐Protected Lignin
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Lignin oxidation offers a potential sustainable pathway to oxygenated aromatic molecules. However, current methods that use real lignin tend to have low selectivity and a yield that is limited by lignin degradation during its extraction. We developed stoichiometric and catalytic oxidation methods using 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) as oxidant/catalyst to selectively deprotect the acetal and oxidize the α‐OH into a ketone. The oxidized lignin was then depolymerized using a formic acid/sodium formate system to produce aromatic monomers with a 36 mol % (in the case of stoichiometric oxidation) and 31 mol % (in the case of catalytic oxidation) yield (based on the original Klason lignin). The selectivity to a single product reached 80 % (syringyl propane dione, and 10–13 % to guaiacyl propane dione). These high yields of monomers and unprecedented selectivity are attributed to the preservation of the lignin structure by the acetal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Boerjan, W., Ralph, J., & Baucher, M. (2003) · Annual Review of Plant Biology · doi:10.1146/annurev.arplant.54.031902.134938 · Cited by 4,504
Cited by
Guidelines for performing lignin-first biorefining
Abu-Omar, M. M., Barta, K., Beckham, G. T., Luterbacher, J. S., Ralph, J., Rinaldi, R., Román-Leshkov, Y., Samec, J. S. M., Sels, B. F., & Wang, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02870c · Cited by 913
Self-citationCatalytic conversion of lignocellulosic biomass into chemicals and fuels
Deng, W., Feng, Y., Fu, J., Guo, H., Guo, Y., Han, B., Jiang, Z., Kong, L., Li, C., Liu, H., et al. (2023) · Green Energy & Environment · doi:10.1016/j.gee.2022.07.003 · Cited by 854
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Stabilization strategies in biomass depolymerization using chemical functionalization
Questell-Santiago, Y. M., Galkin, M. V., Barta, K., & Luterbacher, J. S. (2020) · Nature Reviews Chemistry · doi:10.1038/s41570-020-0187-y · Cited by 430
Self-citationRecent Advances in the Catalytic Depolymerization of Lignin towards Phenolic Chemicals: A Review
Liu, X., Bouxin, F. P., Fan, J., Budarin, V. L., Hu, C., & Clark, J. H. (2020) · ChemSusChem · doi:10.1002/cssc.202001213 · Cited by 390
Metadata
- Authors
- Lan, W., de Bueren, J. B., & Luterbacher, J. S.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2019-01-24
- Volume
- 58
- Issue
- 9
- Pages
- 2649-2654
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2908260027
- Cited by
- 144
- References
- 1
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.