Boosting Water Oxidation through In Situ Electroconversion of Manganese Gallide: An Intermetallic Precursor Approach
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
For the first time, the manganese gallide (MnGa 4) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high‐performance and long‐term‐stable MnO x‐based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnOx minerals with distinct structures and induced defects: birnessite δ‐MnO 2, feitknechtite β‐MnOOH, and hausmannite α‐Mn 3 O 4. The abundance and intrinsic stabilization of Mn III/Mn IV active sites in the three MnOx phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa 4 precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious‐metal‐based catalysts, could be achieved at a current density of 10 mA cm−2 with a durability of more than five days.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting
Roger, I., Shipman, M. A., & Symes, M. D. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-016-0003 · Cited by 3,503
Yan, Y., Xia, B. Y., Zhao, B., & Wang, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08075h · Cited by 1,368
Benchmarking nanoparticulate metal oxide electrocatalysts for the alkaline water oxidation reaction
Jung, S., McCrory, C. C. L., Ferrer, I. M., Peters, J. C., & Jaramillo, T. F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta07586f · Cited by 600
In operando x-ray imaging of nanoscale devices: Composition, valence, and internal electrical fields
Johannes, A., Salomon, D., Martinez-Criado, G., Glaser, M., Lugstein, A., & Ronning, C. (2017) · Science Advances · doi:10.1126/sciadv.aao4044 · Cited by 49
Cited by
Chatenet, M., Pollet, B. G., Dekel, D. R., Dionigi, F., Deseure, J., Millet, P., Braatz, R. D., Bazant, M. Z., Eikerling, M., Staffell, I., et al. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01079k · Cited by 2,025
Self-supported electrocatalysts for practical water electrolysis
Yang, H., Driess, M., & Menezes, P. W. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202102074 · Cited by 489
Self-citationLi, S., Ma, R., Hu, J., Li, Z., Liu, L., Wang, X., Lu, Y., Sterbinsky, G. E., Liu, S., Zheng, L., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30670-4 · Cited by 333
Structural Changes of Intermetallic Catalysts under Reaction Conditions
Li, X., Zhao, J., & Su, D. (2021) · Small Structures · doi:10.1002/sstr.202100011 · Cited by 30
Metadata
- Authors
- Menezes, P. W., Walter, C., Hausmann, J. N., Beltrán‐Suito, R., Schlesiger, C., Praetz, S., Yu. Verchenko, V., Shevelkov, A. V., & Driess, M.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2019-10-15
- Volume
- 58
- Issue
- 46
- Pages
- 16569-16574
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2972067968
- Cited by
- 79
- References
- 4
- FWCI
- 2.47
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.