The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation
Open accessAbstract
Defect passivation has been demonstrated to be effective in improving the radiative recombination of charge carriers in perovskites, and consequently, the device performance of the resultant perovskite light‐emitting diodes (LEDs). State‐of‐the‐art useful passivation agents in perovskite LEDs are mostly organic chelating molecules that, however, simultaneously sacrifice the charge‐transport properties and thermal stability of the resultant perovskite emissive layers, thereby deteriorating performance, and especially the operational stability of the devices. We demonstrate that lithium halides can efficiently passivate the defects generated by halide vacancies and reduce trap state density, thereby suppressing ion migration in perovskite films. Efficient green perovskite LEDs based on all‐inorganic CsPbBr 3 perovskite with a peak external quantum efficiency of 16.2 %, as well as a high maximum brightness of 50 270 cd m−2, are achieved. Moreover, the device shows decent stability even under a brightness of 10 4 cd m−2. We highlight the universal applicability of defect passivation using lithium halides, which enabled us to improve the efficiency of blue and red perovskite LEDs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Akkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Cited by
Ligand-engineered bandgap stability in mixed-halide perovskite LEDs
Hassan, Y., Park, J. H., Crawford, M. L., Sadhanala, A., Lee, J., Sadighian, J. C., Mosconi, E., Shivanna, R., Radicchi, E., Jeong, M., et al. (2021) · Nature · doi:10.1038/s41586-021-03217-8 · Cited by 824
Perovskite Light‐Emitting Diodes with an External Quantum Efficiency Exceeding 30%
Bai, W., Xuan, T., Zhao, H., Dong, H., Cheng, X., Wang, L., & Xie, R. (2023) · Advanced Materials · doi:10.1002/adma.202302283 · Cited by 456
Kong, L., Zhang, X., Li, Y., Wang, H., Jiang, Y., Wang, S., You, M., Zhang, C., Zhang, T., Kershaw, S. V., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-21522-8 · Cited by 436
Perovskite QLED with an external quantum efficiency of over 21% by modulating electronic transport
Fang, T., Wang, T., Li, X., Dong, Y., Bai, S., & Song, J. (2021) · Science Bulletin · doi:10.1016/j.scib.2020.08.025 · Cited by 267
Self-citationPassivation strategies for mitigating defect challenges in halide perovskite light-emitting diodes
Shen, X., Kang, K., Yu, Z., Jeong, W. H., Choi, H., Park, S. H., Stranks, S. D., Snaith, H. J., Friend, R. H., & Lee, B. R. (2023) · Joule · doi:10.1016/j.joule.2023.01.008 · Cited by 197
Metadata
- Authors
- Wu, T., Li, J., Zou, Y., Xu, H., Wen, K., Wan, S., Bai, S., Song, T., McLeod, J. A., Duhm, S., Gao, F., & Sun, B.
- Venue
- Angewandte Chemie International Edition
- Publisher
- Wiley
- Published
- 2020-01-29
- Volume
- 59
- Issue
- 10
- Pages
- 4099-4105
- ISSN
- 1433-7851 (ISSN-L)
- 1521-3773
- OpenAlex
- W2997421454
- Cited by
- 168
- References
- 1
- FWCI
- 8.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation. https://app.cochat.ai/papers/10.1002/anie.201914000
- The paper
- Wu, T., Li, J., Zou, Y., Xu, H., Wen, K., Wan, S., Bai, S., Song, T., McLeod, J. A., Duhm, S., Gao, F., & Sun, B. (2020). High‐Performance Perovskite Light‐Emitting Diode with Enhanced Operational Stability Using Lithium Halide Passivation. Angewandte Chemie International Edition. https://doi.org/10.1002/anie.201914000
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.