The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Multiwalled carbon nanotube polymer composites: Synthesis and characterization of thin films
Abstract
The aim of this article was to elucidate the basic relationships between processing conditions and the mechanical and electrical properties of multiwalled carbon nanotube reinforced polymer composites. In conventional chopped fiber reinforced polymer composites, uniform distributions of fibers throughout the matrix are critical to producing materials with superior physical properties. Previous methods have dispersed carbon nanotubes by aggressive chemical modification of the nanotubes or by the use of a surfactant prior to dispersion. 1, 2 Here, ultrasonic energy was used to uniformly disperse multiwalled nanotubes (MWNTs) in solutions and to incorporate them into composites without chemical pretreatment. Polystyrene (PS) solutions containing MWNTs were cast and spun to yield thin film MWNT composites. The rheology of PS/MWNT suspensions was modeled using the Carreau equation. MWNTs were found to align at the shear rates generated by the spin casting process. The tensile modulus and strain to failure of samples compared well to classical micromechanical models, increasing with MWNT loading. The composite films showed lower strains at the yield stress than neat PS films. The presence of MWNTs at 2.5 vol % fraction approximately doubles the tensile modulus, and transforms the film from insulating to conductive (surface resistivity, ρ, approaching 10 3 Ω/□). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2660–2669, 2002
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exceptionally high Young's modulus observed for individual carbon nanotubes
Treacy, M. M. J., Ebbesen, T. W., & Gibson, J. M. (1996) · Nature · doi:10.1038/381678a0 · Cited by 5,428
Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes
Wong, E. W., Sheehan, P. E., & Lieber, C. M. (1997) · Science · doi:10.1126/science.277.5334.1971 · Cited by 4,810
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Self-citationElectrostatic Deflections and Electromechanical Resonances of Carbon Nanotubes
Poncharal, P., Wang, Z. L., Ugarte, D., & de Heer, W. A. (1999) · Science · doi:10.1126/science.283.5407.1513 · Cited by 1,934
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
Aligned Carbon Nanotube Arrays Formed by Cutting a Polymer Resin—Nanotube Composite
Ajayan, P. M., Stéphan, O., Colliex, C., & Trauth, D. (1994) · Science · doi:10.1126/science.265.5176.1212 · Cited by 1,553
Mechanical and thermal properties of carbon nanotubes
Ruoff, R. S., & Lorents, D. C. (1995) · Carbon · doi:10.1016/0008-6223(95)00021-5 · Cited by 1,387
Surfactant-Assisted Processing of Carbon Nanotube/Polymer Composites
Gong, X., Liu, J., Baskaran, S., Voise, R. D., & Young, J. S. (2000) · Chemistry of Materials · doi:10.1021/cm9906396 · Cited by 957
Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix
Wagner, H. D., Lourie, O., Feldman, Y., & Tenne, R. (1998) · Applied Physics Letters · doi:10.1063/1.120680 · Cited by 893
Flow of a Viscous Liquid on a Rotating Disk
Emslie, A. G., Bonner, F. T., & Peck, L. G. (1958) · Journal of Applied Physics · doi:10.1063/1.1723300 · Cited by 784
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Polymer Nanocomposites Containing Carbon Nanotubes
Moniruzzaman, M., & Winey, K. I. (2006) · Macromolecules · doi:10.1021/ma060733p · Cited by 3,416
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Han, Z., & Fina, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.11.004 · Cited by 2,603
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Dispersion and alignment of carbon nanotubes in polymer matrix: A review
XIE, X., MAI, Y., & ZHOU, X. (2005) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2005.04.002 · Cited by 1,960
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
Dang, Z.-M., Yuan, J.-K., Zha, J.-W., Zhou, T., Li, S.-T., & Hu, G.-H. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.001 · Cited by 1,783
Polymer nanocomposites based on functionalized carbon nanotubes
Sahoo, N. G., Rana, S., Cho, J. W., Li, L., & Chan, S. H. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.002 · Cited by 1,670
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
The role of surfactants in dispersion of carbon nanotubes
Vaisman, L., Wagner, H. D., & Marom, G. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.11.007 · Cited by 1,492
A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites
Mittal, G., Dhand, V., Rhee, K. Y., Park, S.-J., & Lee, W. R. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.03.022 · Cited by 1,371
Big returns from small fibers: A review of polymer/carbon nanotube composites
Breuer, O., & Sundararaj, U. (2004) · Polymer Composites · doi:10.1002/pc.20058 · Cited by 1,246
A review of vapor grown carbon nanofiber/polymer conductive composites
Al-Saleh, M. H., & Sundararaj, U. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.039 · Cited by 1,087
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Highly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Terrones, M. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.012802.100255 · Cited by 973
Recent Advances in Research on Carbon Nanotube–Polymer Composites
Byrne, M. T., & Gun'ko, Y. K. (2010) · Advanced Materials · doi:10.1002/adma.200901545 · Cited by 873
Morphology and Mechanical Properties of Multiwalled Carbon Nanotubes Reinforced Nylon-6 Composites
Liu, Phang, I. Y., Shen, L., Chow, S. Y., & Zhang, W.-D. (2004) · Macromolecules · doi:10.1021/ma049132t · Cited by 789
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution
Yu, J., Grossiord, N., Koning, C. E., & Loos, J. (2007) · Carbon · doi:10.1016/j.carbon.2006.10.010 · Cited by 727
Preparation and Mechanical Properties of Chitosan/Carbon Nanotubes Composites
Wang, S.-F., Shen, L., Zhang, W.-D., & Tong, Y.-J. (2005) · Biomacromolecules · doi:10.1021/bm050378v · Cited by 635
Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites
Kashiwagi, T., Grulke, E., Hilding, J., Groth, K., Harris, R., Butler, K., Shields, J., Kharchenko, S., & Douglas, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.088 · Cited by 618
Self-citationTasis, D., Tagmatarchis, N., Georgakilas, V., & Prato, M. (2003) · Chemistry – A European Journal · doi:10.1002/chem.200304800 · Cited by 576
Electrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560
Dubey, R., Dutta, D., Sarkar, A., & Chattopadhyay, P. (2021) · Nanoscale Advances · doi:10.1039/d1na00293g · Cited by 547
Vibrations of carbon nanotubes and their composites: A review
Gibson, R. F., Ayorinde, E. O., & Wen, Y.-F. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.031 · Cited by 530
Review of the mechanical properties of carbon nanofiber/polymer composites
Al-Saleh, M. H., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.08.005 · Cited by 496
Carbon Nanotubes Reinforced Nylon-6 Composite Prepared by Simple Melt-Compounding
Zhang, W. D., Shen, L., Phang, I. Y., & Liu, T. (2004) · Macromolecules · doi:10.1021/ma035594f · Cited by 461
Tang, W., Santare, M. H., & Advani, S. G. (2003) · Carbon · doi:10.1016/s0008-6223(03)00387-7 · Cited by 414
Functionalization of Carbon Nanotubes with Polystyrene
Hill, D. E., Lin, Y., Rao, A. M., Allard, L. F., & Sun, Y.-P. (2002) · Macromolecules · doi:10.1021/ma020855r · Cited by 389
Transport and separation properties of carbon nanotube-mixed matrix membrane
Ismail, A. F., Goh, P. S., Sanip, S. M., & Aziz, M. (2009) · Separation and Purification Technology · doi:10.1016/j.seppur.2009.09.002 · Cited by 380
Properties of polymer–nanoparticle composites
Schmidt, G., & Malwitz, M. M. (2003) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(03)00008-6 · Cited by 379
Gorga, R. E., & Cohen, R. E. (2004) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20126 · Cited by 301
Review of Applications of Polymer/Carbon Nanotubes and Epoxy/CNT Composites
Kausar, A., Rafique, I., & Muhammad, B. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1163588 · Cited by 286
Layer-by-Layer Assembled Composites from Multiwall Carbon Nanotubes with Different Morphologies
Olek, M., Ostrander, J., Jurga, S., Möhwald, H., Kotov, N., Kempa, K., & Giersig, M. (2004) · Nano Letters · doi:10.1021/nl048950w · Cited by 277
Copper nanowire/polystyrene nanocomposites: Lower percolation threshold and higher EMI shielding
Al-Saleh, M. H., Gelves, G. A., & Sundararaj, U. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.003 · Cited by 253
Metadata
- Authors
- Safadi, B., Andrews, R., & Grulke, E. A.
- Venue
- Journal of Applied Polymer Science
- Publisher
- Wiley
- Published
- 2002-04-18
- Volume
- 84
- Issue
- 14
- Pages
- 2660-2669
- ISSN
- 0021-8995 (ISSN-L)
- 1097-4628
- OpenAlex
- W1977320787
- Cited by
- 558
- References
- 15
- FWCI
- 12.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.